Which Youde RTA Product Have The Biggest Airhole ?

Status
Not open for further replies.

jefx

Account closed on request
ECF Veteran
Jan 27, 2015
403
464
Chicago burbs
I have a UD Goblin, a UD Goliath v2, and a UD Bellus.

Of those three, the Bellus has the most possible airflow, but the Goliath V2 has the best flavor.

However, the Goblin and Goliath v2 both have leaking problems, the Goblin has the inferior 3 post deck, and the Goliath v2's deck is hard to remove.

I would rate them like this:

1. Bellus. simple design, great airflow, and almost completely leak free (with proper wicking).
2. Goliath V2. great flavor, good airflow, but leaks and can be hard to remove deck.
3. Goblin. decent airflow, good flavor, crappy deck, hard to fill, and leaks.
 

HighPlainsPuffer

Senior Member
Jul 9, 2015
288
322
in flux
Agree with the above. Order:

Bellus, Zephyrus, Goliath v2, Goblin Mini (awesome flavor), Goliath v1, Goblin v2, Goblin

I really like the Bellus! Easy to wick, haven't had a leak on it yet, heck my gf uses one for her adv, if it's problem-free for her it'll work great for anyone... Zeph and Goliath v2 both leak very slightly, and the Goblin Mini has great flavor but it only holds 2.5 ml's.
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Agree with the above. Order:

Bellus, Zephyrus, Goliath v2, Goblin Mini (awesome flavor), Goliath v1, Goblin v2, Goblin

I really like the Bellus! Easy to wick, haven't had a leak on it yet, heck my gf uses one for her adv, if it's problem-free for her it'll work great for anyone... Zeph and Goliath v2 both leak very slightly, and the Goblin Mini has great flavor but it only holds 2.5 ml's.
The Goblin Mini used to be my favorite RTA.

The more I use my Silverplay Nano the more I like it.

It cuted all of the problems of the GMini except one.

Airflow directly under the coils so leaks if you don't wick properly.

Why do I like the SP Nano more.

1. Flavor so good to is just a coin flip.
2. Holds a bit more juice.
3. Solid chimney screws into the Bell cap
. get the chimney tight inside the Bell cap. Not recommemd then you can do the following.
3.1 bottom fill without a tool
3.2 pull the build without dumping the juice.
4 uses standard Drip tips.
5. If you shred the silicone seal in the bottom bottom throw it away and put the O ring for the base of a Kayfun or Orchid base. Screw on the top and keep vaping. Works great!
6. I don't have to go dual coil to pull my build out or fill from the bottom. I am still rocking the original coil I built for it. Next time I rewick or the time after that will have to install a new coil. The resistance has gobey from .98-1.14. But I found if I saturate two small cotton balls and tamp them into the unused juice wells with toothpick, tapestry needle, etc the cotton plugs wi stay in the juice wells till I get it assembled. Vape and the deck doesn't flood.

I never thought I would love the SP Nano more than the GMini
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Both at great vapes.
I have one Goblin Mini and a couple Bellus tanks. I would go Bellus.
The mini is good for around the house and has good airflow and flavor.
The Bellus has great airflow, flavor, bigger tank, and is side airflow to coil.

Everything you said is accurate. But I am a flavor chaser so to me the GMini has first place because it has the best flavor
 
  • Like
Reactions: MMW

MMW

Vaping Master
ECF Veteran
Oct 8, 2015
3,661
9,531
48
NH
Right on brother.
Flavor varies from person to person anyways and is more dependant on build, dual vs single, wicking, vg/pg ratio, and how much air you are introducing. IMO anyway.

Everything you said is accurate. But I am a flavor chaser so to me the GMini has first place because it has the best flavor
 

jefx

Account closed on request
ECF Veteran
Jan 27, 2015
403
464
Chicago burbs
Right on brother.
Flavor varies from person to person anyways and is more dependant on build, dual vs single, wicking, vg/pg ratio, and how much air you are introducing. IMO anyway.

Absolutely....
I get a kick out of people who describe "vape flavor" with culinary terms, as if they are sommeliers describing fine wines and gourmet cheeses.

We are, after all, talking about artificial food flavorings that are otherwise used to flavor things like soft drinks and breakfast cereals. NOT hand crafted foods prepared by highly trained chefs.

Personally, an ideal atomizer for me is one that provides enough flavor to use the least possible flavoring additive in my diy juices, and still be able to identify the flavoring used. I try to stick to 5% (or less) flavoring additive. Most premade juice is FAR too overflavored for my taste.

If self proclaimed "flavor chasers" are so enamored by the taste of artificial food flavorings, why don't they just drink the stuff and eliminate the hassle of vaping?
 
Status
Not open for further replies.

Users who are viewing this thread