Wismec Reuleaux RX 200 Firmware 3.0 - Just Released

[TrueNorthist]

That bites BreSha... might have a suggestion but I need to try it out first. brb.

Later: Sorry, but my idea was a bust. All I can do is repeat what works for me: In Windows, with the device on but not connected to the usb, open the UpdateWismec.exe file, then connect the usb and it should recognise the current firmware. Then click update and select the 3.0 .bin file and it should slam the update home.

 

[niczgreat]

My experience with Window 7 is that it seems to need a clean windows machine and operating system to work.

I tried the update on my home computer, no luck. The computer is 3 years old and been through alot of fiddling.

I then tried it on my work computer. 6 years old. No luck.

Then using same cable tried it on a newer computer at work that had never had anything connected to the USB Ports. Immediately recognized and updated.

 

[Hightech Redneck]

I have performed all the updates on my unit with NO batteries installed. This was done on 2 different windows 7 machines neither of which is new. Just bringing up again due to the issues some are having. I loaded up the updater then connected my rx and no issues with being recognized. It's like if there are batteries installed many of the chips are not seeing it as a computer but a charge cable. So in my mind if there are no batts to charge it immediately recognizes.

 

[TrueNorthist]

I have performed all the updates on my unit with NO batteries installed. This was done on 2 different windows 7 machines neither of which is new. Just bringing up again due to the issues some are having. I loaded up the updater then connected my rx and no issues with being recognized. It's like if there are batteries installed many of the chips are not seeing it as a computer but a charge cable. So in my mind if there are no batts to charge it immediately recognizes.

When I first connected my brand new rx to my laptop, Windows 10 actually tried to download a driver, but the update completed before it could finish. I have been fiddling with the updater to see what's up but I think this is an issue with the OS not seeing the rx as more than a battery. Interesting...

 

[fishwater]

I just ordered my RX200 & wondering if I will have the same challenges doing the update on my Windows laptop. I don't own a Mac except for an Ipad, has anyone tried with that?

 

[Jim_ MDP]

I don't know if there's an iOS installer, don't think so though.

The Win installer should work just fine. It has for nearly everyone.

 

[KenD]

I just ordered my RX200 & wondering if I will have the same challenges doing the update on my Windows laptop. I don't own a Mac except for an Ipad, has anyone tried with that?

The firmware update program is available for both windows and osx.

Sent from my M7_PLUS using Tapatalk

 

[Adam Belcher]

Anybody know the default ss setting? I know it was originally for 304ss, is it the same with 3.0 update or have they changed it to the more common 316L?

Got some 0.4mm 316L today and it works great in standard ss mode. When I tried to use m1 with the 0092 tcr it was useless, few tiny wisps of vapour. Is 0092 the correct tcr for 316L?

Also I'm thinking just use ss mode and adjust to where I like it. I'm assuming there isn't the dangers associated with ni200 as people use ss in power/wattage mode. Is this the case, cheers Adam.

 

[BoostAddict]

The standard ss mode setting on the rx is ss316 not 304. Here is the master list for all of the TC wires.

The Ultimate TCR List

 

[c0d3x5]

So far no issues with the crown tank on TC with the SS .5 coil vaping around 55-60 watts, and 500F Seems to be doing pretty good..

this is on the SS mode 3.0v

although i find it weird, and might be just in my head, but if the display is facing away from me, i seem to get a hotter vape in comparison to having the display (tank closer to me)

 

[MintyDripper]

I just updated my Rx200 and it wont even turn on now, worked great the entire time until i just updated it to the 3.0 version.. what happened?

 

[MintyDripper]

I just updated my Rx200 and it wont even turn on now, worked great the entire time until i just updated it to the 3.0 version.. what happened?

Plugged it back in and re-updated.. turns on no, but its stuck in Temp Ti mode... why is it doing this? it will not let me switch to wattage mode, or any mode for that matter..someone help please

 

[Jim_ MDP]

The first thing to do is downgrade to an earlier version to verify that the problem is connected to the latest update, and that the mod will still function.

 

[deucesjack]

Just read on instagram 3.1 is out. 250w now!

Sent from my SAMSUNG-SM-N915A using Tapatalk

 

[KenD]

Just read on instagram 3.1 is out. 250w now!

Sent from my SAMSUNG-SM-N915A using Tapatalk

Which is a bad idea, unless using LG hb2/4/6 batteries, or comfortable pushing the Sony vtc4 over its cdr.

Sent from my M7_PLUS using Tapatalk

 

[7sixtwo]

Which is a bad idea, unless using LG hb2/4/6 batteries, or comfortable pushing the Sony vtc4 over its cdr.

Sent from my M7_PLUS using Tapatalk

To be fair, we're all supposed to be using batteries that fit Wismec's specs anyway; "Cell type: Three 18650 cells(discharging current should be above 25A )". "above 25A" = 30A.

So, using the RX200 (250) at the maximum power output is only a bad idea if you don't have batteries that can actually handle it. One could say the same regarding any mod.

 

[Hightech Redneck]

Anyone installed it yet? Just curious if any other tweaks are included outside of wattage.

 

[BillW50]

Anyone installed it yet? Just curious if any other tweaks are included outside of wattage.

Yes I installed it on my two and I don't see anything different than the 250 watts.

 

[deucesjack]

I installed it. Not because I vape @ 250w. Truth be told I rarely approach 100w. I just like to have the latest updates just in case they tweaked something else as well.

Sent from my SAMSUNG-SM-N915A using Tapatalk

 

[Jim_ MDP]

Most (all?) two cell mods pulse above 150w. The RX didn't have to.

At 80w per... have they changed that? Inquiring minds... etc, etc.