does anyone know how many Wand Ti's were made?
what resistance do you like to use them at?
what resistance do you like to use them at?
Wizard/ Vrajitorul Smallest and lightest mod ever made
- Thread starter mark78
- Start date
- th_trl_thread_readers 0
- Status
I received my Wizards Apprentice and Wand Ti (my second!)... stunning looks, feel and function!
I placed both my already setup Wand Ti and Cobra 3ml Ti (1.0 Ohms) on the WA and it fires like a champ! Apparently no problem with the low resistance ... so far.
I'm pleased in every way.
Also got 4 extra glass tanks for the Wand in the deal... I doubt I'll need them all since the Wand has a protective cap.
I placed both my already setup Wand Ti and Cobra 3ml Ti (1.0 Ohms) on the WA and it fires like a champ! Apparently no problem with the low resistance ... so far.
I'm pleased in every way.
Also got 4 extra glass tanks for the Wand in the deal... I doubt I'll need them all since the Wand has a protective cap.
Last edited:
i messaged Mark from his site to see what he said... about LR and Wizard/APprentice...
Not sure what my resistance is on the Wand as the coil is very worn in and getting different readings ...
I get occasional leaking on my Wand, out the airhole i guess, l vape at a tilt and that hole is close to the coil...
Not sure what my resistance is on the Wand as the coil is very worn in and getting different readings ...
I get occasional leaking on my Wand, out the airhole i guess, l vape at a tilt and that hole is close to the coil...
We recommend using batteries with protection, it can handle 4A for a period of approx. 4 seconds.
Hi everyone,
Sorry about late answers ... not enough time... but better late then never... so... we have some news for the ones that are interested:
Wizard is in production right now and will have few different features then the previous series:
- it is made from titanium implant grade
- the electronics inside will work if you insert the batt with the + up and can be used with the kick
- the engraving will not be made with the laser, will be mechanical
- the bottom of the tube will be changed not as the design ... just for a better functionality.
And will be made for the 18650/18500/18350 batts like his Apprentice.
That is for the now the pics will follow as soon as the Wizard is done.
It will be for sale in May.
Thank you,
Sorry about late answers ... not enough time... but better late then never... so... we have some news for the ones that are interested:
Wizard is in production right now and will have few different features then the previous series:
- it is made from titanium implant grade
- the electronics inside will work if you insert the batt with the + up and can be used with the kick
- the engraving will not be made with the laser, will be mechanical
- the bottom of the tube will be changed not as the design ... just for a better functionality.
And will be made for the 18650/18500/18350 batts like his Apprentice.
That is for the now the pics will follow as soon as the Wizard is done.
It will be for sale in May.
Thank you,
I am so far from knowing enough about electronics...
my impression is that we should not go too low resistance with the Wizards Apprentice... ?
If that's the case, I'd move the Wand to a mechanical device...
Mark, any plans for a mechanical device, or a tube with a DNA20 for those that want to use more watts for Genesis style atomizers?
Online Conversion - Ohm's Law Calculator that is very simple just put there V and ohm and you will find the current ( on 3.7V and 1 ohm you got 3.7A so ..you are ok and the WA is ok)
For the other quastions ... my lips are sealed!
Online Conversion - Ohm's Law Calculator that is very simple just put there V and ohm and you will find the current ( on 3.7V and 1 ohm you got 3.7A so ..you are ok and the WA is ok)
For the other quastions ... my lips are sealed!
very cool!
actually I have 2 Wand Ti... so one stays on the WA for sure. The second gets .9 Ohms coil on a mechanical.
actually I have 2 Wand Ti... so one stays on the WA for sure. The second gets .9 Ohms coil on a mechanical.
very cool!
actually I have 2 Wand Ti... so one stays on the WA for sure. The second gets .9 Ohms coil on a mechanical.
actually I have 2 Wand Ti... so one stays on the WA for sure. The second gets .9 Ohms coil on a mechanical.
Darn it there goes the budget again! Ukeman thought it was double cool;-)
Darn it there goes the budget again! Ukeman thought it was double cool;-)
I know this is an older post, but can you (or anyone else) explain a little more on how the get certain atty's to connect/make contact? When you say you "tap" the center post, how are you doing it? I guess I'm a little concerned about messing anything up in the WA. There's a few atty's I have that won't fire on the Wizard and/or has a 1-2 mm gap when screwed on. Thanks in advance!
Btw, just sold my first WA about a month ago, and recently wanted one back so I managed to acquire another WA-M. It's just a mod I feel I must have in my collection lol. Anyone have a list of atty's that will sit flush (or closest to) on the WA besides the Mark Bugs atty's? I'd love a Wand or Chalice but they aren't readily available. Thanks again everyone!
becasue its titanium?
oh cooooool cant wait would have gotten an 18350 wizards apprentice but an 18350 wizard is wayyyyyyyyyyyy betterwill be watching this thread everyday
awesome news indeed
- Status
