- Status
Ugh...I'm going to think about this. Pages 70-85 or so of this thread gave me pause, not to mention all that is left is brass, and I utterly loathe brass in general. I'll have to think about it.
Has anyone used a regular Nautilus with the metal cage in this mod? Also, was thinking that a P3 Kabuki might work...the 510 adapter acting as a juice shield for the device. But 2ml on an 18650 device that isn't top fill...
I also saw the tank that is made by the same folks, cleverly named the MiniTank that looks interesting, top fill, and I could get 1.2 ohm OCC coils I guess. Shiny stainless tank that would clash nicely with that horrid brass
Good enough for ya, Kat?
Has anyone used a regular Nautilus with the metal cage in this mod? Also, was thinking that a P3 Kabuki might work...the 510 adapter acting as a juice shield for the device. But 2ml on an 18650 device that isn't top fill...
I also saw the tank that is made by the same folks, cleverly named the MiniTank that looks interesting, top fill, and I could get 1.2 ohm OCC coils I guess. Shiny stainless tank that would clash nicely with that horrid brass
Good enough for ya, Kat?
Ugh...I'm going to think about this. Pages 70-85 or so of this thread gave me pause, not to mention all that is left is brass, and I utterly loathe brass in general. I'll have to think about it.
Has anyone used a regular Nautilus with the metal cage in this mod? Also, was thinking that a P3 Kabuki might work...the 510 adapter acting as a juice shield for the device. But 2ml on an 18650 device that isn't top fill...
I also saw the tank that is made by the same folks, cleverly named the MiniTank that looks interesting, top fill, and I could get 1.2 ohm OCC coils I guess. Shiny stainless tank that would clash nicely with that horrid brass
Good enough for ya, Kat?
I've used every variation of Nauti, Kabuki, Cero & Kayfun Lite (etc) in it. All work perfectly, with Kabuki being the most compact (Nauti caged running 2nd).
I'm least comfy with the Kayfuns, as they cause a lot of "wetness" on the plate. Even though it's supposedly hermetically sealed, there's just something about it that makes me a little nervous.
Currently running Nauti full-size, and they're perfect (5ml and the 18650 gets me through pretty much anything).
Is the plate moisture the only "fiddling" that needs to be done? I remember reading about some maintenance concerns 20 or so pages back. I would elaborate, but I don't want to be seen as Kat-bashing
Yes. And it is I who fiddles. [emoji23]Is the plate moisture the only "fiddling" that needs to be done? I remember reading about some maintenance concerns 20 or so pages back. I would elaborate, but I don't want to be seen as Kat-bashing
And you may speak freely here. I believe she was being facetious, as it relates to another thread (that you may be familiar with).
[emoji6]
Fair point. And that would be BAD.I'd be scared of getting a klown, unless I knew and trusted the seller
In fact - I think I'll fiddle TWICE today.
(both need a good cleaning - after a full week of Kayfuns)
I just *may* have an idea of what you are referring to
I thought it was funny! Only Kat would go there so soon!I just *may* have an idea of what you are referring to
Abstolutely (as she would spell it herself)!!!
Huh what? I didn't see/hear a thing.
I don't care for brass either, Stealthy, but tiz what ittiz. In fact, there was a point in time that I thought I might clean it up, but I'm still a bit worried that the cleaner might negatively affect the material surrounding the buttons. The batt cap would be no problem, but funnily enuf, it doesn't seem to be patina-ing like the buttons.
Like DPL, I use everything in mine (Naughties, Ceros, Kabukes). Yes, 2ml on a non-top fill is...... welp, 2ml on a non-top fill, but whatevs. It's the same to me if I have to fill it from the confines of the Xvo or the top of a Provi. It doesn't require a "juice shield" as it's a sealed connector. And the maintenance of cleaning the plate is minimal (altho tricky at times). If you use a non-leaker, you really shouldn't even have to do the plate cleaning very often. DPL is just messy.
Good and Plenty!
Oh you have me cracking up!!!!!!!
I don't believe there's any fiddling whatsoever, sweetie. If you do recall the maintenance concerns of 20 pages back, please let me know. I have zero intention of attempting to use the search function, thankyouverymuchXenForogeddaboudid.
I don't care for brass either, Stealthy, but tiz what ittiz. In fact, there was a point in time that I thought I might clean it up, but I'm still a bit worried that the cleaner might negatively affect the material surrounding the buttons. The batt cap would be no problem, but funnily enuf, it doesn't seem to be patina-ing like the buttons.
Like DPL, I use everything in mine (Naughties, Ceros, Kabukes). Yes, 2ml on a non-top fill is...... welp, 2ml on a non-top fill, but whatevs. It's the same to me if I have to fill it from the confines of the Xvo or the top of a Provi. It doesn't require a "juice shield" as it's a sealed connector. And the maintenance of cleaning the plate is minimal (altho tricky at times). If you use a non-leaker, you really shouldn't even have to do the plate cleaning very often. DPL is just messy.
Good enough for ya, Kat?
Good and Plenty!
Is the plate moisture the only "fiddling" that needs to be done? I remember reading about some maintenance concerns 20 or so pages back. I would elaborate, but I don't want to be seen as Kat-bashing
Oh you have me cracking up!!!!!!!I don't believe there's any fiddling whatsoever, sweetie. If you do recall the maintenance concerns of 20 pages back, please let me know. I have zero intention of attempting to use the search function, thankyouverymuchXenForogeddaboudid.
Messy is as messy does, and I cannot deny such an undeniable fact. 
Using a stock Nauti, cleaning is only required every couple/few months (and barely at that).
Messy stuff, and messy users, may require a bit more frequent tuning.
Using a stock Nauti, cleaning is only required every couple/few months (and barely at that).
Messy stuff, and messy users, may require a bit more frequent tuning.
And I don't know about you, but I have had an issue where every so often I get a lot of leakage on a P3 Kabuki (from the bottom, careful not to overfill).
No issues yet with the Nautilus.
No issues yet with the Nautilus.
Our Kabukes are all 510s, so dunno, hon. I'll get a dribble drop sometimes, but never a leak-leak.
Sigh, what to do...and vapinart doesn't do coupons.
Oh, of the plate....
Be careful not to misalign that lil grub screw!
I plan to plate clean one of mine today. If you like, I'll take pics. Of the plate.
Oh, of the plate....
Be careful not to misalign that lil grub screw!
- Status
Similar threads
- Locked
- Locked
