Zenesis Informational/Help thread. Please Post questions and answers here.

[tyleris12]

Hi all, just had a couple of tanks arrive for an AYS, clear ones fit fine but the cobalt just slips off.. Should it still fit the AYS? Thought it would be ok, got the standard size. Also the large o ring for the cap is too big. Can't find if it's been asked before.

Thanks

There should have been two o-rings included with the cobolt tube...they make the cobolt fit correctly, as it is thinner than the standard tube. Did you not get those with your tube?

 

[applefr3ak]

We also found out we were shipped some of the wrong size o rings for the cobalt as well. So please get in touch if you believe that was the case. It should fit if your AYS uses the same glass as the mini/standard

 

[greynz]

We also found out we were shipped some of the wrong size o rings for the cobalt as well. So please get in touch if you believe that was the case. It should fit if your AYS uses the same glass as the mini/standard

Thanks, yeah I think that's what happened. Tried the two smaller ones that come with the cobalt but they won't hold the tank, also the one for the top cap is too big (though not important as have those already)
I'll contact through your site, thanks

 

[applefr3ak]

k i will have our warehouse manager get a hold of you tomorrow.

 

[Feightwins]

Question... I went on your site inquiring on the TI sale tomorrow. I see there was an option to get notification when they are available, which I see is tomorrow, but I can't find out how to register with you guys. I just want to be as prepared as possible. Are you taking new registrations or do you at all? Thanks!






Boognish will return!

 

[applefr3ak]

Registration happens with your first purchase with us. When you check out on the site as a guest at the end you have the option to create an account if you like.

 

[trio1980]

The only question I have is when are we going to find out some more info about the heresy APV? I may have been looking in the wrong place but I can't find any information about it.

 

[andyman97]

The Heresy APV

A prototype was on display at vapercon. It has an automatic, user replaceable switch with a 510 connection. I haven't heard any news on when it will be released for sale. Due to the nature of the automatic switch, it won't be compatible with conventional style genesis atomizers, though.

 

[tybin]

bumping this thread so it shows up on my first page

 

[Abracastabya]

Just swapped out my switch screw. Works sooo much better!!





Zen Mini, Orion 2.1, 69 Mod with Cobra Atty, ProVari.

 

[kiba]

^thats awesome, i wonder if it comes in brass?

heres a question I'm moving over to here

heres a ? for ripp or andy, or LL or OB lol... is the bolt that's underneath the ZAG (the +pos connection) pressed through, or can it be removed like the SW? Mine is a bit loose and the tank spins a bit too freely, and also leaks, im guessing due to it being loose.... I was thinking about just pulling it out and replacing it w/ a brass one (if i can find one that fits) while im tightening it back up, or just pulling it to clean the juice off the threads thats leaking down, like sometimes happens on the SW. Just need to know if its pressed in or is it meant to come out like the one on the SW?

 

[cryptodogg]

^thats awesome, i wonder if it comes in brass?

heres a question I'm moving over to here

One could, if they choose, take the bolt out and take it to a bolt supply shop and have them inform them of the thread pitch and size....if they didn't have one in stock at that shop, one could go onto McMaster Carr and search out the correct brass bolt in those sizes. It may need to be shortened as it runs up into the atty deck where the SS collar screws onto the top. One would need to be careful with the delrin isolators and make certain not to overtighten and cause a dead short....I see no reason it can't be done....as long as you can find a brass machine screw with in the correct size and pitch.

 

[Critter421]

Any chance of getting a quartz tank in between standard and mini? I would like to use a standard zen cap with a quartz tank on my sidewinder.

 

[MasterShake]

Any chance of getting a quartz tank in between standard and mini? I would like to use a standard zen cap with a quartz tank on my sidewinder.

you mean an in-between size? if so no.

 

[Critter421]

Auto correct.... How about quartz tube, uncut?

 

[MasterShake]

Are you looking for a quartz tube for the SW?

 

[Critter421]

Are you looking for a quartz tube for the SW?

I am, you know of one?

 

[MasterShake]

There is one in the works right now Critter

 

[Critter421]

Can't wait! Thanks

 

[MasterShake]

No problem send me a pm and ill try and update you when they come out