• Locked
Weird mod/tank issue

Hi,
My Aspire mod wasn't firing and said "no atomizer". I cleaned parts and posts and tried again. No luck. So to trouble shoot I attached the Aspire tank to my Twister mod and it fired. Great. The problem must be the Aspire mod. Nope....I put the Twister tank on the Aspire mod and it fired!! Can anyone tell me what's going on?

Thanks,a
Ken
  • Like
Reactions: TARTARA

The ECF Club - Open 24/7

Welcome to the ECF Club (open 24/7)...

This is the 'un' official ECF gif + meme + whatever + boring??? thread.

After this post it is suggested that you only reply to all posts with a gif figure it out on your own.
Simple!!! :greengrin:

okay.gif


However...... if you feel the need to reply in the textual...... go for it!!!

<--- :lol: :lol: --->​

All ECF rules still apply here...... so nothing questionable or rule breaking.

feel free to "express" ---OR--- "improvise" yourself as you see fit

wanna post your random thoughts, don't be shy, go for it

animal photo's and video's, awesome

positive stories from around the Globe ---> now your talking, post 'em
<<<we all know the Citizens of the World have had enough of Doom and Gloom>>>

music videos... post 'em

it's kinda "the whatever" thread........ we make it what it is

So off we go!!!

  • Locked
SMT's Creamy Vanilla Custard Cupcakes

cupcake-500x500.jpg


SMT's Creamy Vanilla Custard Cupcakes

FW Vanilla Cupcake 3%
FW Creamy Sponge Cake 1.5%
WF Cream Filling 1.5%
INW Custard 0.65%

Optional additions:

FLV Frosting 0.75%
WF Crumble Topping 0.5%

Suggested steep time = 4 weeks. Cream, custard and bakery flavors dictate the steep time. As always, YMMV.

Not much I can say about Flavor West Vanilla Cupcake or Creamy Sponge Cake. Individually they are two of the best bakery flavors we have in DIY. As Tony the Tiger says "They're G-r-r-reat!"

Magic happens when they are combined in a mix. We get the benefits of what each offers in creating a very solid cake or cupcake profile. I also mixed this as FW VC 1.5% and FW CSC 3% for a different tasting bakery profile. Either way it's tasty. FWIW, basically this is a cupcake base or a cake base. I had to choose one for the recipe name.

For this mix I wanted a rich cream with a light custard note. I did not want to use a custard that was eggy.

INW Custard is the perfect choice for mixes where you don't want a noticeable egg note. It adds all the other pleasing custard notes. If someone wanted a full-on custard flavor (with the egg note) then I would recommend using 0.65% - 1% FA Custard Premium.

WF Cream Filling is much like the cream we've all experienced in a cream filled cupcake. WF CF is not overly sweetened. It sits at about the midpoint (0-10 scale). WF CF also adds a light vanilla note. I love the Wonder Flavours creams. IMHO they are right up there with the best creams around.

INW Custard and WF CF also add moistness and mouthfeel.

I mixed four variations of this. The recipe as written and then one I already noted (FW VC and FW CSC ratios).

For the third I used FLV Frosting. IMO it is the best tasting and most accurate frosting around. FLV Frosting tastes just like a frosting we've all experienced on any cake or frosted cupcake. It's very realistic compared to a decent frosting IRL.

For the fourth I added WF Crumble Topping. It tastes much like a very basic streusel topping. If you don't have it, Get It!!! Yes, it's that good. :greengrin:

I vaped plenty as described above "as is" and each was a very pleasing bakery mix.

However......

As a cake or cupcake base nearly any additional flavors will work very nicely. Naturally, this all depends on percentages used. My recommendation: start low and tweak to taste.

A fruit or two, no problem at all. Adding an individual nut flavor will work fine. Or, going with CAP Nut Muffin at 0.75% would add the nut and an additional bakery note.

Adding a chocolate will either give us a chocolate with a light swirl if used lightly - or - if used higher it will turn the base into a chocolate cupcake or cake.

The addition of an ice cream flavor give you, ummm, cake and ice cream!!!


Please note:

You may have seen that I added links to Bull City Flavors for all the flavors mentioned in this post. I did so because BCF is basically a one-stop-shop for DIY flavors.

BCF has a vast selection of flavors. Most folks on ECF, VU, ELR, ATF and other places purchase flavors from BCF. They are an excellent company and they ship quick.

ECF has an ongoing 6% discount code at BCF. Use code ---> ECF6

They offer free domestic shipping on orders $49.99 and up. Use code ---> FREESHIP

Domestic orders over $74.99 ship free, no code needed.

Subscribe to the BCF newsletter for updates on new products and sales.

BCF routinely offers sales with 10%-20% off with no minimum purchase amount on most US holidays. Those usually run over the course of a few days.

I do not work for nor am I associated with BCF. I am merely trying to help my fellow DIYers.

Steam Crave Mini Robot RTA

I bought one of these in SS and it has to be the best RTA I have ever used. I just ordered one in black today. Easiest tank to fill. Simply unscrew the top and fill. No chance of leaking at all. Easy to build too. There is nothing better out there in my opinion.

Attachments

  • PXL_20230204_161956244.MP_2.jpg
    PXL_20230204_161956244.MP_2.jpg
    1.3 MB · Views: 65

Newbie Question Here

First of all I just want to say hi to all on this forum, good to be here.

As my title states, I am a newbie to vaping, trying to make the switch from cigs. My question is in regards to the nicotine level I am trying to find.

I am currently using a Uwell A2 with the 1.2 pod, I was told that this pod is closer than the 0.9 to a draw of a cig, "mouth to lung", and that is what I am looking for. My issue is I cannot get the right amount of a juice mixture, it is either too much and gives me a buzzed/dizzy feeling, or it is not enough to satisfy me. I am light smoker and have smoked Marlboro Mellows/Silver pack for years, and never have gotten a dizzy feeling from them.

I have been using American Patriot naked 100 tobacco, and I mix the 3mg with the 0mg. I have tried 1/2 to 1/2, 3/4 3mg to 1/4 0mg, 1/4 0mg to 3/4 3mg and everything in between. Like I stated above it is either too much nicotine or not enough, an because of this, I keep going back to my Marlboro's. Just wanting to get some advice on this as I really want to make the switch form cigs to vape.

Any advice would be greatly appreciated.

Joe

  • Locked
1 ohm mtl build

Using 28g ni80 2mm 9 wraps. 17 watts(4.2v). Great throat hit but not too hard. Nice little cloud for an mtl.

I want to try a parallel 2 strand 32 guage ni 89 build. Shooting for .8 to .9 ohms


What mtl builds are you guys vaping on and have you made any parallel builds work? (28 guage parallel build swere harsh as fak for me. I feel like 32 guage wire should be thin enough. Maybe even 30.

Vaping on stng rda by wotofo and dovpo dual topside squonk(big mod for this rda but oh well.)
Black and gold edition mod and gold stng.
Great rda and only 15 bucks. Simple and basic but nice. Airflow can be set to tight as f or on the loose side.
Recommend for sure. Especially if you are low on money.

  • Locked
First NET - thank you all!

Hello everyone, I just joined but wanted to give a thank you to everyone in this sub-forum. I started vaping some because my wife didn’t like me smoking cigars more than about once a month, and I enjoyed the flavor so I was looking for a replacement on off weekends. After reading through a lot of posts here I successfully used Str8vision’s Hot Ethanol and VG method and some cigars I had which I wasn’t super impressed with to create several NET extracts that are excellent even before aging (and I can tell will only get better) . Better than the original cigars in some cases - so it will be fun to experiment and see how it turns out.

I have no idea if any of the people who started and fueled this sub forum are still around here, but if so, thank you very much!

And to everyone else - if you like NETs and cigars and have some unlit but good quality stogies you weren’t a fan of, they might just make excellent NET fluid. Also, to save time and money, take a look at Fumas or “Cuban Sandwich” cigars - the insides have smaller pieces of tobacco, often offcuts of much more expensive cigars, and they chop up really well with minimal effort (since the tobacco is already smaller anyway). The same goes for the high quality small cigars - I don’t mean gas station cheapies, though I’m sure you can give those a try if you want, but high end cigarillos will give you a lot of bang for your buck in my limited (thus far) experience - good tobacco, but as they’re smaller the price is cheaper than otherwise for the amount of tobacco.

Thanks again, and happy vaping!

  • Locked
Newly Launched: TOOT Bar Disposable Vape Kit

Many young people want to try vaping, but don't know how to choose. For beginners, disposable vape kits are definitely the best choice. Disposable cigarettes with simple structure and rich taste can make novices quickly adapt and fall in love with electronic cigarettes. Simple operation and compact body make it very convenient to use and carry. This toot bar disposable vape kit is a fashionable representative of disposable cigarettes.

The appearance of this disposable vape kit is very simple, small and fresh. The square body lines show an extremely high-end texture, and the particularly harmonious Morandi colour system makes the overall style more retro. The body shell is very flat, without redundant design and protrusions, which provides you with a more comfortable grip. The slim, long shape makes it easy to carry on the go.
toot-bar-disposable.jpg

You can get 600 puffs from the toot bar disposable vape kit, which is enough for most people to puff all day. The well-developed 2ml e-liquid is very pure, allowing you to enjoy a 2% concentration of MTL smoking. I believe this is very attractive to most novices.

All accessories of this disposable cigarette follow the TPD standard to provide you with quality and safety assurance. The 380mAh battery is able to power your device, giving you an unforgettable taste and a superior feel. With the Draw-activated system, you can inhale whenever and wherever you want, which is very convenient.

If you are still looking for the latest and most fashionable electronic cigarette products, you are welcome to go to our vape shop online uk to choose.

We would also like to recommend the following products for you:
lost vape centaurus m200 uk uk
cheap geekvape aegis l200

  • Locked
Sourcemore × Vapefly Jester II 2 Kit Giveaway, 3 winners, ends on Feb. 9th, 2023




Jester 2 Kit is powered by a built-in 1000mAh battery with a side Type-C charging port. It has draw activated system to be easy to operated and LED indicator to show you the battery status. With 3S chip protection, it is safe to use. The independent air inlet also makes you easy to gain RDL to MTL experience by adjusting airflow. It is compatible with Jester 2 0.6Ω/0.8Ω/1.0Ω/1.2Ω Pod Cartridge that has transparent curved design and 3ml capacity. And Jester II 2 Pod can automatically match the recommended wattage for each resistance.

Sourcemore × Vapefly Jester II 2 Kit Giveaway, 3 winners, ends on Feb. 9th, 2023

Enter here

  • Locked
  • Question
Weird sitch w premix juice and vg

Hey everybody, new here. I have a puzzling one. Makes zero sense to me. Hopefully, y'all can help.

So I went to Michael's and bought Loranns food grade vg. Added .8ml to 4.2ml of aqua drops 6 nic ejuice. Shake, shake, shake....shake, shake, shake. Put it in my Cerberus tank with .17 ohm coil. Fired it on the drag mini (I believe, hand-me-down) at my usual 62W and it seemed to have burned really hot. Airflow almost all the way open. I had to turn it down to 52W, and it still was burning my mouth. Why? Did I instantly burn my coil bc of the vg? I usually mix the aqua with Jimmy the juicemans strawberry astronaut 3 nic max vg. But the only local B&M that still sells it closed, online can take up to 2 wks, and I'm out. Just trying to find an alternative. Thanks in advance.

  • Locked
MOLLE cartridge pouch/ecig holster?

Hi there fellow vapers. I am sitting here making a holster for my 7.2 inch tall phone out of a double 30 round m16a2 MOLLE pouch (single pouch) and I was wondering if anyone knew of a MOLLE pouch that an aegis x mod would fit in. It just the mod I settled for because I just put my aegis legend to rest after 3 years it hit the concrete one two many times and the battery door finally broke. It would be awesome is some one knew of a MOLLE pouch that's been around a little while, so the price is right. I'll leave a picture of the one I do have. Thanks

Attachments

  • 16754027702626972335896560686018.jpg
    16754027702626972335896560686018.jpg
    4 MB · Views: 16
  • 16754028025284591596498451228648.jpg
    16754028025284591596498451228648.jpg
    4 MB · Views: 18
  • Like
Reactions: TARTARA

  • Locked
New Atomizer: Aspire Atlantis GT Tank

Today I want to bring you a brand new atomizer, aspire atlantis gt tank. With a standard capacity of 4ml and a TPD capacity of 2ml, you can assemble and match the glass tube according to your actual needs. The base can be adapted to different diameter air inlets, including 1mm/1.2mm/1.5mm, different diameters have different air flow rates, so you can combine them at will. In addition to this method, you can also adjust the rotation through the airflow ring of the base.
aspire-atlantis-gt-tank_(1).jpg

The e-liquid is filled from the opening on the side, you only need to rotate the top cover to expose the hole, and you don’t need to disassemble the device, which saves time. The mouthpiece equipped on the top can be replaced. The 510 drip tip will not be too choking when inhaled, but it will not affect the taste. The authentic taste of e-liquid and the mellow smoke will definitely make you addicted.

This atomizer is also equipped with 0.18ohm and 0.3ohm to aspire se coils, the lower the resistance, the greater the amount of smoke produced, you must judge your own acceptance before choosing. Since the atlantis gt sub ohm tank is easy to disassemble, it will be very convenient for you to clean it up.

As a sub ohm tank, the overall structure is still very reasonable, and you can carefully consider whether you need it. We also prepare more for you at cheap vape online.

Browse more cheap vapes:
uwell crown m
drag 4 kit uk

  • Locked
PSA: Do Not Try Purchasing Nicotine from Carolina Xtract

If you try purchasing nicotine from Carolina Xtract you will never see the product. The website is still running and taking orders. Some people have had difficulty getting their money refunded. Others were able to obtain refunds.

Yesterday Wayne from DIYorDIE posted this short video on his YouTube channel explaining everything.

Login to view embedded media

  • Locked
Fast Tech closed the door .....Where do we buy now?

Sup everyone, since FastTech closed the door because of government regulations where do we get good price now? Us Stores will jack the price like they usually do so thats not an option for me.... I dont mind waiting weeks for delivery like i did at Fast Tech.....

anybody have a good source to order Innokin Z coils ? cheap?

i found this website but dont tknow if its legit..... anybody ordered from here ? online its says they are competitors of fastTech...

thanks





thanks for reading ;)

Filter