Any USA suppliers with cheap shipping?? Non signature, decent shipping costs? Ty

CLICK HERE TO BUY SUORIN AIR MINI KIT
USE COUPON CODE (VUFORUM) TO GRAB ADDITIONAL 15% DISCOUNT

Parameter:

• Size: 32.3*14*75mm
• Capacity: 2ml
• Resistance: 1.0Ω
• Battery: 430mAh
• Output Power: max 14w
• Color: Mint Green, Silver, Black, Star-Spangled Red, Star-Spangled Blue, Red, Diamond Blue, Light Blue, Rose Gold, Gold

YOU MAY ALSO LIKE:
Vaporesso Gen PT80 S Kit
VooPoo Drag Q Kit
VooPoo Argus Pod Kit
Yocan Stix Plus Kit

I have about 30 of these, all sealed in shrink-wrap, brand new in the box. I am keeping 10 for myself. Someone here on ECF said that EHPRO made the best Kayfun Lite clones. I surely beg to differ. I have some of the EHPRO Kayfun Lite clones, and I like the Tobeco clones more. The Tobeco clones are heavier and better built in my opinion. They are both great clones no doubt. If you have a small collection of these Kayfun Lite Plus V2 clones, you will be set for life vape wise.

These are high quality units. They come with both metal and clear tank sections, plenty of extra o-rings and extra screws, and two small screwdrivers in each factory box.

Price is $10 each plus shipping.

These are about 7 ounces each packed and ready to ship, so shipping is exactly $5.50 in the lower 48 states. If you want more than one Kayfun, I can ship up to 5 or 6 units for $9.65 via USPS Priority Mail padded flat rate envelope.

Drop me a line if you have questions, or have interest.

I have 7 unused Kayfun Lite V2s I would like to sell. 5 are still sealed in the box. $20/ea or make me an offer for all 7.

Please see 2 posts down for photos. Authentic EHPro Kayfun Lite V2s

Freemax Twister 2 80W Kit is a rare variable wattage vape pen kit, which you can adjust the wattage by a simple twist of the base from 15W to 80W or turn fully anticlockwise to lock the device and prevent accidental operation.

It consists of Fireluke 4 Tank equipped with FM COILTECH5.0/Double-D Mesh and Twister 2 Mod designed with a 3D embossed effect. Fireluke 4 Tank features a 5ml glass tube, a replaceable 810 drip tip, and a 510 base. Its top fill design is ISO 8317 Child Resistant Certified, which makes the tank super easy and convenient to fill and clean. Moreover, Twister 2 80W Mod is a variable wattage mod powered by a large 3000mAh built-in battery and charged with a 5V/1.5A USB Type-C cable.




Size: 28*143mm
Capacity: 5ml/2ml
Drip Tip: 810
Battery Capacity: 3000mAh
Output Wattage: 15-80W
Output Voltage: 0.7-7V
Input Voltage: 3.2-4.2V
...

Click here for more:

Freemax Twister 2 Kit: Freemax Twister 2 80W Mod Kit

Steam Crave Aromamizer Plus V3 RDTA can be said to be a very outstanding product among many tanks. Does V3 RDTA have a bright spot that deserves the user's attention?

Aromamizer Plus V3 RDTA is very amazing in terms of capacity which consists of a 12ml RTA model and a 3ml drip tip model. Its whole is made of stainless steel and the part that holds the vape juice is made of a glass tube, which makes the RDTA easy for you to view the e-liquid.

Utilizes a top-fill system that not only fills quickly but also does a good job of preventing vape juice leakage. The Plus V3 RDTA also features the flexibility to create decks. You can freely choose from four types of decks for coil building, there are single coil deck, mesh deck, speed deck, and tandem deck.

With 80% side airflow and 20% bottom airflow. Helps you have better precision airflow and you can control the amount of airflow entering at will. Matched with Steam Crave Hadron Plus DNA250C Mod. Give you the most amazing vaping experience.

Powered by super-powerful dual 21700 batteries, this mod can reach a maximum output of 200W, giving you an endless thrill. The 810 drip tip allows you to inhale with a massive cloud giving you a powerful throat hit.

We also suggest you:
cheap uwell valyrian 2 pro tank 8ml
hot sale hellvape dead rabbit 3 rta uk

Eleaf iSolo Air 2 Kit consists of iSolo Air 2 Mod and GTL Mini Pod 2. It is powered by a built-in 1500mAh battery with 1-40W output and Type-C charging.

Features

• 1-40W Output
• 2ml Eleaf GTL MINI 2 Pod Tank
• 1500mAh Battery Capacity
• Eleaf GTL MINI 2 Pod cartridge
• Top Filling System
• GTL 0.8ohm Coil and GTL 1.2ohm Coil
• mesh Coil Structure
• Adjustable Airflow
• Smart Chip
• Magnetic Connection
• OLED Screen
• Leather and Alloy Construction

iSolo Air 2 features 2ml e-juice capacity, easy top filling and adjustable airflow. It is compatible with Eleaf GTL Mini Pod Tank and GTL 0.8/1.2ohm Coil to deliver you the enhanced and pure flavor.

iSolo Air 2 also adopts smart chip inside to recommend the best wattage for coil.You could go to best online vape store to buy.

You may also like:VOOPOO VMATE E Pod System Kit 1200mAh 20W

Hi everyone! I found this wonderful site looking for recipes and have mixed several good ones. Thanks to those who have posted! A little about myself: I smoked for 45 years and was up to 2 packs a day. I tried everything from nicotine gum to prescription medications and nothing worked. The medication had horrid side effects. Two years ago I finally tried vaping, and the day I started I quit cigarettes. Smoked my last cig on the way to a local vape shop. So, all those saying vaping doesn't work don't know what they are talking about. You have to find a flavor you absolutely love. Shortly after starting, I found I was wasting money on juice. I tried many $20 bottles to throw them away. So it wasn't long until I was into DIY. Also, I have found some good recipes on here. Glad I found this site.

Sonder U Kit is powered by a built-in 1000mAh battery with 20W max and Type-C charging. Designed with slim body, Sonder U is easy to carry and comfortable to hold. It has no button and adopts auto draw design to be user-friendly for all. Sonder U is compatible with the GeekVape U Cartridge with 2ml e-juice capacity and 0.7Ω coil resistance to bring you stellar MTL and restricted DTL vaping experience. The clear view pod makes it easy to check to e-juice level. Fit for nic salt e-juice, Sonder U is best for beginners.

GeekVape Sonder U Pod System Kit Giveaway, 1 winner, ends on Jul. 26th, 2022

Enter here

It packs an internal 800mAh battery that can generate up to 20W of output power. The airflow can be conveniently controlled by slightly moving the adjustment slider on the rear for a satisfying taste.
NOVO 2X - SMOK® | Innovation Keeps Changing the Vaping Experience

Looking for a Lost Vape Orion Q Pro, Orion Quest, Orion DNA GO or DNA PLUS. Preferably the Q pro, but I’m open to the others listed.

Please comment or PM!!

Freemax Twister 2 Kit comes with Fireluke 4 Tank equipped with FM COILTECH5.0/Double-D Mesh and Twister 2 80W Mod designed with 3D embossed effect, which is a rare variable wattage vape pen kit that can adjust wattage from 15W to 80W by a simple twist of the base, like Twister 80W and Twister 30W Kit. Moreover, another function of the Twister 2 kit can be turned fully anticlockwise to lock the device and prevent accidental operation.



Fireluke 4 Tank features a 5mL glass tube, a replaceable 810 drip tip, and a 510 base, which also adopts industry-leading FM COILTECH5.0/Double-D Mesh coil technology with a child-resistant top fill design. And the Twister 2 80W Mod is a variable wattage mod powered by a large 3000mAh built-in battery and charged with a 5V/1.5A USB Type-C cable. Besides, it’s also equipped with FM CHIP 2.0 to provide all-around protection, and most importantly, it has a cool appearance with a 3D embossed effect that will attract a lot of attention and is really textured to touch.

What are the main features of the Freemax Twister 2 80W Kit?
1. FM COILTECH5.0/Double-D Mesh - Ultimate Mesh Coil Technology from Freemax!
2.3D Embossed Effect, Bring the Design to Life
3. Bottom Wattage Dial, Twist to Adjust
4. Turn Fully Anticlockwise to Lock, Prevent Accidental Button Press
5. Real 3000mAh Built-in Battery, Large Enough for All-Day Vaping
6. Top Fill Design, ISO 8317 Child Resistant Certified
7. FM CHIP 2.0, Smarter & Faster & Securer

This thread is for the general discussion of the Product Freemax Twister 2 80W Kit. Please add to the discussion here.

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They should never be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This cell is a good performer. At 10A it did almost as well as the Lishen LA/SA/SD/SF and the Molicel M50. At 20A it’s essentially equal to the Lishen LA and Murata VTC6A. The Molicel P42A and P45B and the Samsung 50S outperform this cell at 15A-20A and higher though.

I have not tested its cycle life. Check my 18650 Ratings and E-Scores table (link below) to see how well this cell performed against others.

Cell-to-cell performance consistency (four cells) was okay but not as good as cells from the big manufacturers. I don’t think you would notice the difference though.

These Imrens tested out at 4284mAh and 4294mAh…weird. Perhaps Imren uses two different cells for this model?

The 25A continuous current rating on the wrap seems reasonable. But the wrap lists a 40A “non-continuous” rating, which is useless without knowing how it was set. Was it based on voltage sag? Cell temperature? Cycle life? A combination of these things? Or was it just something the cell can survive for a couple of pulses?

If we just say the rating is 40A does that mean I can keep pulsing the cell at 40A until it is empty? No, that would make the cell much too hot! We need to know how the rating was set and what limits it has to know how it can be properly used. Otherwise it is a useless number.

Some of the large manufacturers have higher non-continuous ratings but they tell you the limits for the rating (voltage sag, max temperature, effect on duty cycle, etc.). I would love to see Imren do the same.

A 40A pulse for two seconds brought the voltage down to about 3.5V, which isn’t bad. But you can easily overheat the cell pulsing it at levels this high and it does speed up aging of the cell. If you want to pulse a cell this hard never let the cell get hotter than the datasheet limit of 75°C.

Interestingly, the datasheet lists a 40A continuous and 80A pulse (2 sec) rating. I do not know why the wrap ratings are so different from the datasheet ratings and the 80A rating is preposterous. IMO, this makes the datasheet pretty useless.

Imren has told me that they are committed to using accurate ratings and are even willing to get rid of the high pulse/burst/max ratings on the wrap. This is great to hear but we will have to see what happens. It will take time for Imren to redo the wraps and get them into distribution though.

Four cells were donated for testing by Imren (Best 18650 Battery Shop - Rechargeable Batteries in USA | IMREN). Thank you!


18650 Ratings and E-Scores Table:
https://www.e-cigarette-forum.com/blog-entry/18650-battery-ratings-table.7447/


20700/21700 Ratings and E-Scores Table:
https://www.e-cigarette-forum.com/blog-entry/20700-21700-battery-ratings.7827/


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: https://www.e-cigarette-forum.com/forum/blog-entry/list-of-battery-tests.7436/

CLICK HERE TO BUY VAPORESSO GEN PT60
CLICK HERE TO BUY VAPORESSO GEN 80S KIT
USE COUPON CODE (VUFORUM) TO GRAB ADDITIONAL 15% DISCOUNT

Specifications(PT 60 KIT):

• Dimensions: 112 x 35 x 28 mm
• TANK Capacity: 4.5ml/2ml(TPD)
• Coil Resistance:
• GTX 0.2Ω MESH Coil(45-60W)
• GTX 0.4Ω MESH Coil(26-32W)
• Battery Capacity: 2500mAh
• Output Power: 5-60W
• Charging Current: DC 5V/2A, Type-C
• Display: 0.91” OLED Screen

Specifications(80S KIT):

• Dimensions: 132 x 30 x 29 mm
• TANK Capacity: 4.5ml/2ml(TPD)
• Coil Resistance:
• GTX 0.15Ω MESH Coil(60-75W)
• GTX 0.3Ω MESH Coil(32-45W)
• Battery Capacity: 1 x 18650 Battery(Not Included)
• Output Power: 5-80W
• Charging Current: DC 5V/2A, Type-C
• Display: 0.91” OLED Screen

Can anyone point me online where I can get good quality glass bottles to store juice for long term storage? I need 60's, 120's, 500's and 1 liter's (if they make them that large). I heard dark glass is better (amber?) but I'm not an expert in this field.

A vendor had recommended bottles on Amazon to me about a year ago but I lost the link and am overwhelmed with the amount of options that come up in searches and have no idea what to pick.

Thanks

Anyone have one of these to sell? I just want the mod and don't care about the tank. Any color would be ok. I would pay up to $100.00 for a working one.

Thanks!

Hi ECF,

Guess what? Innokin Klypse gradient colours are coming soon!!

You asked, we listened. The multi-award winning Innokin Klypse is now available in a range of bold new gradient colours!



Express your style with these vivid, high-quality finishes, or mix and match for even more unique options.

The future of pod systems has arrived.

Best regards,
Innokin Team

Hello guys,

We're now looking for more reviewers for our products as your opinions do matter for us. We want to hear your voice!

What will we offer to you?
Free samples of Eleaf newest products

What do we need from you?
Honest and professional feedback and reviews for our products
Your opinions are Sooooooooooo important to us!


Simply first pay a visit to our website: https://www.eleafworld.com/

If you’re interested in Eleaf products and professional about vape products, please comment below. We’re looking forward to communicate with you and appreciate every opinion you’d like to share with us!

Thank you so much!
Eleaf, Simply Smart, For Better Tomorrow!

The Authentic Hellvape Helheim S30 RDTA Tank Vape Atomizer is a collaboration with Five Team from Germany bringing you a massive 30mm diameter, bottom and side airflow, dual coil, 12ml beast.

Features

• Dual Coil Building Deck
• 30mm Diameter
• Postless Deck
• 12ml Vape Juice Capacity
• Dual Honeycomb Airflow System
• 6 Wicking Steel Wires
• Bottom AFC Ring
• BF Pin For Squonk Mod
• Two Pre-installed Ni80 0.42ohm Coils

Designed and engineered specifically for vapers who demand big flavor, big juice capacity and massive dense clouds.Please go to vape shop online to buy.

You may also like:

smok novo4 Pennsylvania
dotmod aio compatible coils California

Lost Vape Centaurus Tank review features a stunning appearance. Luxurious and sophisticated, Centaurus Sub Ohm Tank gives you perfect visual enjoyment. As you can see by the appearance, the vape juice is stored through a glass tube and you can clearly know when it needs to be refilled. The tank is also easy to fill by removing the top cap.


The 810 drip tip comes with a wider diameter to satisfy your desire to inhale more at once, and with the top, not airflow, it can be said that Centaurus Tank is both smooth and has an exciting inhalation feeling. Compatible with UB Max Coil, its low resistance allows the device to transfer more heat and produce enough flavor to get a head start.

What's more, the 510 thread connection allows for a tighter connection of the tank to the Lost Vape Centaurus Q200. 6 premium colors are used, each with its own uniqueness. This is a tank that would be a pity to miss. The stainless steel and glass material makes the product itself very strong but also does not affect its beauty.

Produces the perfect DL as well as RDL vape, allowing you to experience a more enjoyable throat sensation.

You may also in fond of:
best uwell valyrian 2 pro 8ml glass uk
cheap hellvape dead rabbit 3 rta

The Pump Squonker has a new bottle and 18650 case coming!
Are you excited for a Ultem color?
@across_vape × @dovpo_official
www.dovpo.com

PC1000 Amber

PC1000 Black

PC1000 White

Please visit: V-XROS-RIGHT-NOW » VAPORESSO for more details

Aquila Tank is designed with a plug-in-out changing method at the bottom base, which greatly simplifies the coil replacement compared to our previous tanks.5ml eliquid capacity with the Top filling, one-click spring-loaded button,and filling the ejuice from the top. mesh coil compatibility, and dual slotted Bottom airflow control ring.




Size:25.3*59.5mm
Coil: E1 Dual Mesh Coil 0.16ohm (60-70W);P1 4in1 Mesh Coil 0.14ohm (60-70W)
Capacity: 5ml
...

Click here for more:

Aquila Tank: HorizonTech Aquila Tank