I was just looking at Bull City again and noticed a big choice of flavor concentrates. For example Black Cherry can be ordered FA, FLV, FW, NF, and TFA - Are some of these companies known for better quality flavor? Which are considered best?
And about how many drops of liquid per 30ml would you use for a not too strong favor?

Besides Bull City, any other companies recommended for flavors? I was also looking at
Vapor Vapes who sell flavors - anyone ever use them?

- THANKS!

Login to view embedded media
What would one of my wonderful posts be without some music to listen to?

You guys have been so helpful to me in the past, ever since JC dieded (I had their Vea) -- thank you so much!

Well, you were so awesome setting me up with the Geek Vape Flint but alas, when I went back to re-up on their kit (the glass neck cracked), I couldn't find it for sale.

So, yes, I guess I made the mistake of buying the Mero; I say it was a mistake because now when I go back to buy coils (only one coil was included and it popped on me on the second day), alas I am unable and the Mero kit page returns 404.

So here I am stuck again! Let's sing it!!

I am willing to re-up with any basic kit really, I don't like fancy anything (no box kits etc. & I vape 99% of the time at home in front of my comp) but I am totally clueless where the "right" place is to go; I mean everyone has their personal preferences and I have always found your advice so helpful!

Whomever wishes to vent their personal favorites, with their eye on my preferences for BASIC, would always have my appreciation!

Now I must depart but can I leave without serenading you once again?

Login to view embedded media
Nope!

Find us on telegram
@maxvapesg

Anyone know where I can get flavored disposable Hyde’s near webster ny

Dear Customers,

Hope you are doing well these days!

Here comes Healthcabin new round of brand discount promotion for wholesale only, Sept Brand Discount – Round 2, with 3% off for selected 10 brands. Take the chance to join us and save more on your favorite vape-brand products!

3% OFF Selected Hot Brands

• Discount: 3% OFF for selected 10 hot brands
• Date: 13th – 20th Sept, 2021 (-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart

10 of our best selling brands listed below:

• VOOPOO
• UWELL
• INNOKIN
• VANDYVAPE
• DOVPO
• WOTOFO
• Horizon
• Eleaf
• HELLVAPE
• LOST VAPE

With any questions, please feel free to contact your account manager.

Please view the Sept Brand Discount – Round 2 here.

YIHI SXmini MK Pro Air Kit signatures a 2ml refillable vape juice capacity that is visible to check your e-liquid. The ergonomic mouthpiece creates a tight friction sleek that brings a comfortable feeling when you are vaping, satisfying both MTL and RDTL vaping needs. It accepts coils in a plug ‘n’ play manner and can be equipped with three types of MK Pro Air Mesh coil of 0.8ohm, 1,0ohm, and 1.2ohm. No more sticky thread to screw on or off, it offers a magnetic connection for time-saving and delivering power.

Associated with the MK Pro Air Pod, it boasts a 700mAh internal battery that is ready for a longer session and can be rapidly charged with a Type-C connection, which ensures you all-day use, never worry about the outdoor occasion. It takes advantage of the YiHi SX366M chipset to support the kit. With its LED Indicator lights, it can remind you to charge your kit. The Anodized Aluminum material made a skin-like tough feel on the fingertips and a streamlined body for its wonderful appearance. The pod fits for MK Pro & MK Pro Air kit only and can meet your imaginable sense of vaping and the unprecedented experience of mind and the tip of the tongue.

Parameters:
Size: φ18.6 *110mm
Material: Anodized Aluminium
Battery: 700mAh Internal Battery
Chip: YiHi 366M Chip
Charging port: Type-C Charging
Capacity: 2ml
Resistance: 0.8ohm / 1.0ohm / 1.2ohm

Features:
Compact and budget-friendly pod system
Internal 700mah battery
YiHi 366M Chip
Constant and reliable power output
Draw activated
LED indicator lights
Spring-loaded magnetic connectors
Both MTL and RDTL vaping
Three types of MK Pro Air mesh coils

Packages:
1* YIHI SXmini MK Pro Air Mod
1* YIHI SXmini MK Pro Air Pod
1* YIHI SXmini MK Pro Air Mesh coil
1* Type-C USB cable
1* User manual
1* Warranty card

Steam Crave Hadron Plus DNA250C Kit has a removable PLUS V2 RDTA that has two capacity options, including 8ml vape juice (standard form), and the potential ultra-large 16ml capacity, it acts itself to be a versatile tank as both an RTA and as an RDTA. The air airflow is adjustable via the ring on the side, associated with a single-coil postless deck, pleasing you with the pure taste and the smooth vapor.


When it comes to Hadron Plus DNA250C mod, this dual 21700 battery (not included) improves the longevity of this device and has long-lasting use, and is easy to open and close the battery door. The ultra-fast adjustable wattage shows its simple operation by the single button, up to 200W satisfy your favorite flavor performance. Packed with the USB charging connection available for built-in onboard charging, which delivers a fast charging technology, giving you a rapid charge and having an on-the-go use. It affects the functionality by utilizing DNA 250C chipset that contains three efficient vaping modes: Replay Mode, Watts Boost Mode, Accurate Temperature Control. The kit is intelligent to find a perfect puff when it is in the Replay Mode, if you prefer an unprecedented flavor for a powerful wattage, Watts Boost Mode is the best. Accurate Temperature Control Mode is beneficial to avoid the coil becoming too hot. the Low Resistance Protection, Onboard Reverse Polarity Protection, atomizer protection, short circuit protection, overheat protection, and low voltage step-down protection provide you all-round security. With its strong metallic material, you will never worry about deep dents and scratches, and with its unique square shape and comfortable toughness, you will immediately love it.

Parameters:
Steam Crave Hadron Plus DNA250C Mod
Size: 58* 34* 98mm
Material: Aluminium Alloy
Battery: dual 21700/ 20700/ 18650 battery(Not Included)
Input Voltage: 6.0V- 8.4V
Battery Voltage: 3V-4.2V
Output Voltage: 0.2V-8.0V
Power: 5-200W
Current Range: 0.5A-30A
Max Charging Current: 3A (2A suggested)
Temperature Range: 200℉-600℉
Screen Pixel: 0.9” (80*160 pixel) full Color TFT Display
Steam Crave Plus V2 RDTA
Diameter: 30mm
Material: Stainless Steel & Glass
Capacity: 8.0ml/16ml
Drip Tip: 810 drip tip
Resistance Supported: 0.1ohm-3.0ohm
Coil Material supported: Nickel, Titanium, SS460, SS316, KA1, Nig0, Ni90

Features:
Dual 21700 Batteries, Max 200W output
DNA 250C chipset by Evolv
The most versertile RDTA
Boost mode and replay function
Both An RTA And As An RDTA
Side Adjustable Airflow System
Single Coil Postless Deck
Firmware upgrade
Built-in onboard charging
Fast Charging
Pass-through
On-the-go Use
Atomizer protection
Low resistance protection
Onboard reverse polarity protection
Short circuit protection
Overheat protection
Low Voltage step down protection

Packages:
1* Hadron Plus DNA 250C Box Mod (Evolv Logo on) without battery
1* USB Connecting Cable
1* User Manual
2* Battery Wrap
2* 18650 Sleeve
1* Aromamizer Plus RDTA equipped with Plus V2 Postless Deck
1* Spare 8ml Glass
1* 8ml Metal Extension
2* 6mm Chimney Reducer for Glass Tank Section and Metal Tank Section
1* Spare Part Bag of O-rings and Grub Srews, Slotted Screws
1* Allen Key
2* Coil Cotton
1* Manual
1* Mesh Deck Kit
1* Vape Band
1* SteamCrave Sticker

Do you think Freemax M Pro 2 Tank is one best sub ohm tank? As we all know, Freemax M Pro 2 is the brand new updated version of the legend M Pro tank, which has multiple mesh coils compatible for options, choosing M Pro Mesh Coils Series or SS904L M Mesh Coils. If you are a DIY fan, you can choose M Pro RBA to build.

FM COILTECH4.0 equipped with military grade SS904L mesh and Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton), and the upgraded top-fill mechanism make M Pro 2 Tank the best sub ohm tank in the market.



Freemax M Pro RBA Coils - single or dual coil configuration

M Pro 2 Coils Series:
Freemax 904L M1 Mesh Coil 0.15ohm 40-70W Best 65W
Freemax 904L M2 Mesh Coil 0.2ohm 60-90W Best 80W
Freemax 904L M3 Mesh Coil 0.15ohm 80-110W Best 100W
Freemax 904L M4 Mesh Coil 0.15ohm 70-110W Best 95W

M Pro Coils Series:
Kanthal Single Mesh 0.15ohm Coil - Recommended power range of 40-70W
Kanthal Double Mesh 0.2ohm Coil - Recommended power rating of 60-90W
Kanthal Triple Mesh 0.15ohm Coil - Recommended power rating of 90-110W
Kanthal Quad 0.15ohm coil - Recommended power rating of 80-120W
Kanthal Quintuple 0.15ohm coil - Recommended power rating of 80-100W

More information about Freemax M Pro 2: Freemax M Pro 2 Tank

Hello,guys!I have good news for you. "Mid-Autumn Festival"Promotion is coming! Ends at 23:59:59 on September 21st.


Use discount code "MA12" for Sitewide 12% Off.

Entrance:vapesourcing.com

Hi,

I recently bought the original caliburn to get away from alt. As pods are getting expensive. I used 4% (or 40mg Nic salt)

I bought 2 x 100 ml 3mg freebase liquids but there is absolutely no hit.

I am wanting the same effect as the alt. pods so just wondering what to buy to mix with the 3mg liquids to get a more satisfying hit.

Thank you
- from nz

So i've decided to go ahead and buy the Mipod this week. I love it, the look of it and all the reviews seem amazing. What do you guys think about the Mipod?

Hi ECF members, In this review I take a look at the Caliburn A2 Kit from Uwell. The Uwell Caliburn A2 Kit was supplied for the purpose of this review by Sourcemore.

Uwell Caliburn A2 Kit 15W 520mAh Pod System Kit




Introduction

Uwell were best known for their Crown tanks until a simple pod system called the Caliburn came along which grabbed peoples attention for both the draw and vape quality from such a small device. Since then we have had the brand name milked somewhat although those products bearing the Caliburn name in general have been rated highly but here we see the update version of the original, the A2!

With a much better viewing window, improved clear pod and lower ohm higher output pod Uwell fight back against the Caliburn like devices we have seen over the last couple of years some of which in my opinion surpassed it.

Unfortunately we see no improvement in battery capacity, still a fixed airflow and the coils are not replaceable so let's see if the A2 offers a notable upgrade or just more of the same?

_________________________________________________________________________



In The Box





Contents:

1* Caliburn A2 Pod System Kit
1* Meshed-H 0.9Ω Pod 2pcs
1* Warning Card
1* Filling Guide
1* Social Media Card
1* User Manual



_________________________________________________________________________



Aesthetics and Ergonomics

The Caliburn A2 came in opened lid cardboard box packaging with outer cardboard sleeve, we have a Black & White image of the device on the cover and contents etc on the reverse. The device is made of Aluminium Alloy and is lightweight, it is also a much more curvy and streamline design compared to the straight angles we saw on the original, it's very comfortable in the hand to both just hold or fire using the large, flush, circular fire button positioned a third of the way down on the face of the device. I received the Iris Purple colour, the options are Black, Grey, Green, Blue, Orange or Iris Purple.

On the face of the device above the fire button we have a large viewing window and it's really nice to see working in tandem with the clear pod it's very fit for purpose unlike so many on these small pod devices including the original! towards the bottom centrally on the vertical we have "CALIBURN" printed followed again centrally in a vertical position the LED indicator. On either side of the device we have a small airflow hole towards the top and apart from at the bottom having "UWELL" printed the back of the device is featureless.

On the base we have a plastic section with safety marks and central Type C USB port, moving up top the Black sloped MTL friendly mouthpiece protrudes!




_________________________________________________________________________



Caliburn A2 Specs and Features:

Material: Aluminium Alloy & PA
Size: 110.1mm × 21.3mm × 11.7mm
Capacity: 2ml
Battery: 520mAh
Output Wattage: 15W
Coil: FeCrAI UN2 Meshed-H 0.9 Ω
Fill Type: Top filling
Charge: Type-C quick charging
Pod Connection: Magnetic

• 1. Unique ergonomic design, smooth & comfortable grip
• 2. Exclusive PRO-FOCS technology, authentic flavour
• 3. One button system, direct draw or button draw
• 4. Perfect lip fitting design, made for MTL vapers
• 5. E-liquid check window, prevent coil burning
• 6. Adopts Meshed-H 0.9Ω Pod, coil non-replaceable

Colours: Black, Grey, Green, Blue, Orange, Iris Purple






_________________________________________________________________________



What You Receive?

You receive the Caliburn A2 with UN2 Meshed-H 0.9ohm pod already pre-installed but protected by a film layer over the pods contacts. Of course you receive all the usual paperwork and also a spare identical pod. You don't receive a Type C cable though which as this is the sought of device that could well get recommended to a new vaper I find a massive con as they will probably not have one!




_________________________________________________________________________



The Pods

Normally for pod devices I do sections for both the pod and coils but here we have non replaceable coils like with the original and in my opinion a con, I would much prefer to just replace the coil rather than the whole pod, the flip side to that though these pods with sealed coils don't tend to leak or produce the same levels of condensation!





The installed coil is the FeCrAI UN2 Meshed-H 0.9ohm which incorporates Uwell's Pro-Focs technology, both included pods are identical and as far as I can find out is the only option available! Note: Original Caliburn pods do not fit and A2 pods will not fit the original!





The pod holds 2ml of e-liquid and the pod liquid holding section is completely clear which is a big pro. The comfortable, sloped MTL mouthpiece just needs pushing from the front towards the rear to click off the pod revealing its filling method. To one side we have a decent sized port with self sealing Red membrane, we also have a tiny hole the opposite side which will not let liquid out but let's air escape while filling! What I do like is the mouthpiece can be removed and pod filled without removing the pod from the device!





Moving to the base of the pod we have the 2 contacts and a magnet either side, we also have 2 outlets to the auto draw membrane switch so it doesn't matter which way around the pod is inserted.




_________________________________________________________________________



Fitting The Pod

Looking inside the pods bay we can see the central Gold plated, spring loaded contacts and a magnet to each side. The pod simply gets pushed into the bay and is held in place by the strong magnetic connection, it is also a snug fit so we get no movement whatsoever!






_________________________________________________________________________



Operating The Device

The device is the usual 5 quick clicks of the fire button to turn on and off with either action being confirmed by 3 Green flashes of the LED indicator. Once on you can just take a draw or use the fire button as this has both button and auto draw activation.





Whichever method you use to vape (button or auto draw) the LED lights up to show the current charge of the battery while vaping, the colour of the LED corresponds to the following:

Green = Over 60% charge
Blue = 30% to 60% charge
Red = Less than 30% charge





When the battery is depleted the LED indicator flashes 10 times and you can't vape!

It does say this gives 15w of power and according to the manual it gives out a constant voltage output but fails to say what that output is. My math makes it 3.7v to give 15w with the 0.9ohm coil but with simple small devices like this they only tend to give any constant output while the battery allows as they don't have any form of boost so 3.7v pretty much equates for the most part to this being a direct output device. After saying that I just didn't notice any drop off in power which seemed consistent throughout the battery life so if anyone knows more specific information their comments are very welcome!

_________________________________________________________________________



Protections and Indications:

Short Circuit Protection 3 Red Flashes
Low Voltage Protection 10 Red Flashes
Timeout Protection 8s 5 Green Flashes
Open Circuit Prompt 3 Blue Flashes




_________________________________________________________________________



Charging

As mentioned no cable is provided which for me is a con as this device is one that would be suitable for a newer vaper who probably doesn't have a cable!

While charging the LED slowly pulses a colour to indicate the charge on the battery so first it pulses Red until it reaches 30% and then pulses Blue until it reaches 60% and finally pulses Green until fully charged, once fully charged we have a solid Green light.

The charge rate is 1A (max) averaging about 0.8A and is 90% charged in just 35 minutes, it takes 50 minutes to fully charge which is very good!, It also supports pass-through vaping!




_________________________________________________________________________



My Thoughts!

Compared to the original Caliburn the A2 gives a slightly looser draw so very loose MTL and I could even do a very restricted Direct lung but whether you prefer it to the original will be whether it falls into your wheelhouse or not. I personally like it and it also gives noticeably more power, vapour production and excellent flavour, it is also a warmer vape!

Where there can be no doubts about the improvement is the pod and viewing window, visibility of the liquid level is very good and being able to fill quickly while not removing from the device are massive pros!

The auto draw gives exactly the same performance as using the fire button and battery indication gives some idea of battery status apart from I found when the LED first started lighting Red which meant there should be almost 30% charge still left only about 10 puffs later we have full battery depletion which doesn't equate to anything like 30%? Also one of the cons many had with the original Caliburn was the 520mAh battery, the A2 see's no improvement in fact with the 0.9ohm coil compared to the original's 1.4ohm giving out more power battery life is very poor! On the up side the device will 90% charge in just 35 minutes while supporting pass-through and is fully charged in just 50 minutes.

I like the ergonomic rounded form factor, flush large button which gives a quiet but definite click and as mentioned for such a small pod system it gives a smooth powerful vape with bags of flavour, I also suffered no leaking or condensation during testing which is quite often the case with fixed coils but I still find it a con I can't just change the coil rather than entire pod, I would also prefer other coil options. My last con is no adjustable airflow although these simple pod devices tend to not have, I did try putting my finger over one of the holes but it made very little difference while putting fingers over both holes did give a tighter draw but made the airflow turbulent!

To sum up if the draw falls into your wheelhouse you will love this but with just one coil option and no adjustable airflow it will not be to everyone's liking. Whether it is an improvement over the original, all things considered I would say yes!




_________________________________________________________________________



Likes

Ergonomic form factor
6 Colour options
Large, flush fire button
Fire button give quiet click
Fire button or Auto draw activation
Auto Draw matches fire button draw performance
Fit for purpose viewing e-liquid window
Top-fill, fill without removing from device
Clear pod
Extremely comfortable mouthpiece
Pod fits securely (no movement whatsoever)
Smooth consistent loose MTL draw
Excellent flavour
Suffered bo leaking or condensation
Type C USB
Charges 90% in 35 minutes
Fully charged in 50 minutes
Battery status and charging indications
Supports pass-through


Cons

Poor battery life
Very little warning for battery depletion (only on red for about 10 puffs)
Coils can't be replaced (need to replace whole pod)
Airflow non-adjustable
Only one coil/pod option
No Type C USB cable included


I would once again like to thank Sourcemore for supplying the Uwell Caliburn A2 Kit for the purpose of this review, thanks for reading and stay safe!

Uwell Caliburn A2 Kit 15W 520mAh Pod System Kit


$14.04 - Uwell Caliburn A2 Kit /$8.42 Cartridge(same code)
Code: CAPK

Disclaimer: I am not affiliated with Sourcemore or benefit in any way from the use of the above code but was asked if I would include it in my content!

_________________________________________________________________________

Hi I’m new to vaping and have been told as a smoker I would be best off using mtl as apposed to dtl.

I have a geek vape aegis legend which as far as I am aware you can use as either.

Do I need to set it up in a certain way to use as a mtl vape and if so how?!

thanks

steve

Hey, recently I moved to leeuwarden, Netherlands. I don’t see the USA premium juice or any vape juice that’s more 10ml.

I was wondering if I order vape juice from Germany or UK or any other countries, like, 120ml 3MG nicotine in it, will it be a problem? Also do I have to pay tax or extra money for it?

Hey, I used to vape years ago and took a break for a few years, I used mech mods and would build my own coils and make these fancy twisted coils and would experiment and build different types of coils, I would even patina a decorate some of my copper mech mods too! I enjoyed the hands-on craft of this hobby.

I would like to get back into this hobby and focus on building coils and chasing big clouds! It's just that after having not been in the vape world for a few years things sure seem pretty different from what I remember, back then everyone had mech mods and the building coils was just part of it, now you can buy pre-made coils and the prices of some these mech mods have shot through the roof!

I need help in understanding what equipment is ideal for my needs, I assume to building crazy coils and chase clouds you would have to use a mechanical mod? or can this be done with these new regulated box mods?

I recently walked into a smoke shop and bought some stuff without much research and the guy at the store didn't know much either, so I just bought some stuff that looked right lol!

I bought:
Lost Vape Quest Grus 100w MOD
Wotofo Atty3 RDA
and some SS316l wire in 28g
and a 18650 battery in a white wrap that says "energy" in blue on it, not sure if this is real or a knockoff

I wrapped a single coil and did about 13 wraps on a 2mm rod and it came out to 1.1ohm, I installed it and it worked but I only got about two or three small hits before the battery got low and I would have to charge it, the battery only lasted about 20-30mintues after charging overnight, the vapor from the first hit was also pretty disappointing too.

Definitely not the clouds I was used too

Anyways I'm wondering if you guys can help steer me in the right direction and let me know what I'm doing wrong and also what equipment I should I buy for my needs, I'm planning on buying everything new again so if the equipment I listed above cant be used then that's fine. Not sure if I should jump back into mech mods or maybe there is a new way to do things now!

thanks!

Looking for 1.5 Mint or Mango pods, located in Canada. Willing to buy 3-5 Packs.

Hey there everyone! My name's Adam (my GT is HyDrOpOnIc1987, Hydro for short lol) and as of August 31 2021 i made the switch to vaping from analogs. My aunt gave me an Istick TC40w with a Nautilus X tank for helping her move last month, and i havent looked back lol I just wanted to say Hi to everyone and see how everyone's doing on such a fine Sunday afternoon (1:43pm here).

Btw, this forum has been so valuable to me because of all the info thats floated around on here. Since im a noob, ive had SO many questions and ive found most answers here on the forum. So, thanks guys and gals!

Hope yall are having an amazing day, take care and stay safe!

Hey everyone! I'm new to this forum and as a collector of a bunch of things vape related, I'm very happy to be a part of this site! So thank you for allowing me to be here and I hope to talk to some of you soon!

What's the most reliable way to get Juul pods these days? I've been looking for 1.5 mint, mango and fruit however have had a tough time finding it anywhere. Let me know guys!

Can hardly believe I’m parting with this atomizer but someone else should enjoy it for a while.
The serial number is: 2014/05
Let me know if you want pictures.
Thanks
ErnieKim

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This cell appears to be accurately rated and is a decent performer that should be available at a lower price. It doesn’t perform quite as well as the Samsung 30Q but where cost is the priority, and as 30Q’s become harder to find, this could be a good cell to consider using.

The two cells I tested delivered 2999mAh and 3002mAh. This is fantastic consistency for a cell from one of the large, established China factories. Both cells tested essentially at their 3000mAh capacity rating but like the cells from the bigger manufacturers I prefer to see the typical capacity delivered by a cell be decently higher than its rating. This is a true 3000mAh cell though.

Two cells were donated for testing by 18650BatteryStore (18650 Battery Store - Lithium Ion Batteries, Chargers and Accessories). Thank you!


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum

Hello again and welcome to today's review of the AREZ 120 Mod from Hellvape. The AREZ 120 Mod was provided to me from Healthcabin and can be purchased from them using this link Hellvape AREZ 120 Box Mod. The AREZ 120 as you probably guessed has a maximum wattage output of 120 watts when using a 21700 battery, you also have the option of using a 20700 battery that outputs a maximum of 100 watts and finally a 18650 battery using the provided adapter that will output a maximum of 80 watts. This is a very simple to use device being a wattage only one and has only 4 button combinations to remember, now that you know the basics of the device lets delve in for a closer look at the features of the AREZ 120 MOD.





COLOR CHOICES





INCLUDED WITH THE DEVICE





PARAMETERS








ENGRAVED FROM A SINGLE BLOCK OF ALUMINUM





LIGHTWEIGHT AND COMPACT





SOLID BUILD QUALITY





THREE BATTERY OPTIONS





7 COLOR CHOICES FOR DISPLAY BACKGROUND





UNBOXING AND FIRST IMPRESSIONS


I was very impressed with the appearance of the AREZ 120 upon opening the package, I was sent the blackish green color and didn't expect it to look as nice as it does. It's color matching buttons really blend into the device and the little bump out at the top above the fire button makes a nice fit if thumb firing. Included in the box is the charge cord, user manual, warranty card and 18650 battery adapter.





Using a screw-on type of battery cap as many devices do the cap threads were a bit noisy and crunchy for the first few times of screwing on/off but that went away very shortly. Testing all 3 types of batteries I had no movement of them inside the device when it was shaken. Having a type-c charge port is a big plus unfortunately the charge port is on the bottom next to the battery cap.

When a battery is first installed the device will ask what size battery is being used, using the adjustment buttons move to the battery display of the battery your using and press the fire button to confirm your choice and the device will power on.





Battery polarity is clearly marked on the battery cap itself with a minus symbol but no markings for positive are inside the battery tube. 4 ventilation holes are present on the cap in case a problem occurs with the battery. The Made In China placement location is a real eyesore for the device as you will see later on in pictures, I always thought something was stuck on the bottom of the device when first testing it out because of it peeking out.





The top plate of the device is silver in color with 3 screws attaching it that surround the 510, this was a missed opportunity to really make the device match well with atomizers, it works with most but if the top plate was the same color as the device it would look even better. The device is resting on the included 18650 adapter. A 25mm atomizer fits perfect, you may get away with a 26mm with some overhang.







On each side of the device is a line that has been milled into the device that runs from top to bottom, I find no real function for them other than giving the device a accented appearance that looks good on it. My pictures really don't show how beautiful the color of my green one is.






AREZ is only shown on the bottom portion of the spine in white, placement branding of the AREZ in this location works well for the device. I'm sure that you noticed by now all corners are rounded making it very comfortable to hold.





The front face of the device has your control buttons with 100% color matching with the mod, the oblong shaped fire button works well being clicky but not very noticeable, the adjustment buttons clickyness on the other hand are.





As earlier mentioned a 25mm atomizer looks the best on this device but even a 24mm works as well, there is a very slight gap between the atomizer and the top plate on all atomizers that I have tried on the mod. Notice the bottom of the mod looks like something is stuck to it, that's the Made In China marking I spoke of earlier.





The color display screen is bright and vivid with easy to read fonts along with all the information you need. I wish it had battery % because there is room for it on the screen.

DISPLAY LAYOUT

* Name ( HELLVAPE )

* Wattage

* Lock/Unlock Symbol

* Ohms

* Volts

* Puff Counter

* Battery Bar





One thing that I want to mention is that because the adjustment buttons are right above the display screen you should make adjustments pressing them from the sides of the device so you don't block the display screen.

The device adjust in .5 increments from 5-10w after that it adjusts in 1 watt increments which may bother some MTL vapers that use 1/2 watt increments over 10w. The round robin feature is on the AREZ, this is a reasonably fast scroller as well.

There is no menu on the Arez and only 4 button combinations to remember.

* On/Off - 5 presses of the fire button

* Clearing Puff Counter - Press the fire and down button simultaneously

* Wattage Lock/Unlock - Press the fire and up button simultaneously

* Background Color Change - Press the up and down buttons simultaneously


PROS

* ATTRACTIVE

* LIGHTWEIGHT

* 3 BATTERY OPTIONS

* 7 BACKGROUND COLORS TO CHOOSE FROM

* ROUND ROBIN

* TYPE-C

* SCROLLS FAST

* BRIGHT AND VIVID DISPLAY


CONS

* 1/2 SECOND DELAY WHEN COLD FIRING

* WHEN USING ADJUSTMENT BUTTONS SCREEN IS BLOCKED

* LOCATION OF MADE IN CHINA MARKING


USING THE AREZ 120


First off I will say my pictures don't do justice to the beauty of the AREZ 120 and having a choice of 3 types of battery is a big plus but I strongly encourage you to take advantage of the 21700 battery for more vaping time between changes or charges.

Hand fit is great using either thumb or finger to fire the device, in my cons I mention the location of the adjustment buttons blocking the screen when used like you normally would, but pressing them from the sides of the device is no real issue for me I just wanted to mention it.

Now what is a issue for me is the delay in firing, 1/2 to 1 second of a delay when firing the mod cold. After the first vape when the coil has been heated up it fires instantly but only after the coil becomes heated up first.

I thought it was happening only with low builds but just to make sure I put a build of 1.6 on a MTL tank and the same thing happens firing at 16 watts.

I tried 3 different atomizers all of which had the same results, I let the coils cool down for 5 minutes and tried them on different mods and all fired instantly without needing a pre-heat tap of the fire button.

After that first vape with all 3 tanks everything worked fine as long as the coils remained warm, once cooled the 1 second delay happened again on all of them. After the first 3 days of testing I just resolved to tapping the fire button once before a vape if the device sat or wasn't used for a bit.

The device reads coils accurately and functions perfectly after your first vape or the fire button is tapped to warm the coil, that's all it takes just a small tap and your golden

So in closing, it might be annoying for some like myself to have to tap the fire button because so many devices have instant fire capabilities but I did get used to it quickly. A 1/2 to 1 second delay may not bother you.

I would like to thank Sue and Healthcabin for providing the Hellvape AREZ 120 for the purpose of this review, I also hope this review answered your questions about it.

THANK YOU
BIGBOB2322

Hello, for about 5 years now I have been running a Digiflavor Mesh pro rebuild-able dripper, 10MM wide stainless steel mesh at 0.15 ohm, I run 100% VG unflavored, make it at home for cheap. love everything about it except for dripping, dripping is annoying especially when driving. I drip because last time I was at this choice wicking 100% vg from a tank was unreliable.

Has that changed? recommendations for a tank that will wick 100% vg? bonus if it will take the 10mm stainless I have rolls of, or if I can at least get stainless mesh for it?

The Vaporesso Target 80 is a relaunch of an old line of mods and partial AIO's that put Vaporesso's name on the map.

The Vaporesso Target 80 - CHAPTERS

00:00 - Intro and specs
02:00 - Close up
09:00 - Temp Control & Wattage Vape
10:00 - Thoughts


Login to view embedded media