I'm running low on both the PG/VG. If I decide to get it from Amazon, does anyone have any clue which is safe to use?
Thanks

Discover the Geek Vape H45 Aegis Hero 2 45W Pod Mod Kit, featuring an integrated 1400mAh battery, 5-45W output range, and uses Geek Vape B Series Coils. Constructed from durable zinc-alloy, the chassis of the Aegis Hero 2 Pod Kit is slim and portable without sacrificing performance. Drawing power from the internal 1400mAh battery, the Aegis Hero 2 Kit is great for all-day vaping and can unload delicious flavor and vapor from your favorite eJuice or nicotine salt, held in the 4mL refillable pod. Constructed in an IP67 rated manner, the Aegis Hero 2 is impervious to light falls and drops, as well as, intrusion from any water, moisture, or dust, protecting the internal chipset.


Parameters:

Size: 43.1* 28.6* 91.05mm
Battery: built-in 1400mah battery
Output: 5-45W
Screen: 0.96 inch TFT Screen
Modes: Power/ Bypass
Resistance: 0.1-2ohm
Working Temperature: 0-45℃
Charging: 5V/2A
Standby current: <20uA
Drip tip: 510 drip tip
Capacity: 4ml
Resistance: 0.4ohm(25-35W) 0.6ohm(15-25W)
Features:
Internal 1400mah battery
Max 45W output
IP67 tri-proof
Top-to-bottm airflow
Stable output, buck-boost tech
0.96 inch TFT screen
Geekvape B series coil
Larger air inlets
Magnetic connection

Hello again everyone. Today I’m here to present my first review for Wotofo. I was sent the Gear V2 RTA in order to provide a fair and honest review and that is what I plan to do. Wotofo has made the statement that “the essence of this upgrade starts with the idea of taking its original simplicity to a new level while boosting its performance enormously”. We shall see how it performs. The V2 is a single coil rta with a 3.5ml capacity and is 24mm in diameter. I have to say that I never tried the original Gear RTA so can’t really do a fair comparison but will do my best to cover this new version and provide my thoughts on it.




WHAT’S IN THE BOX?

1* Wotofo Gear V2 RTA
2* Framed Staple Clapton Coil 0.33Ω
2* 3mm Thick Cotton Strip
1* Screwdriver
1* Accessory Bag
1* User Manual




SPECIFICATIONS:

Diameter: 24mm

Height: 38.5mm (with drip tip and 510 pin)

E-liquid Capacity: 3.5ml

Filling Type: Top filling

Airflow: Fixed side airflow

Thread: 510 thread

Main Material: SS+PCTG

Insulator Material: German PEEK

Coil Type : Single wire coil

Coils Included: Framed staple Clapton

Material: Ni80

Resistance: 0.33Ω

Inner Core: 28G+38Gx9+28G

Outer Wire: 36G

Internal Diameter: 3mm

Power Range: 5-60W

Best At: 40-50W

Color: Black, SS, Gunmetal, Blue, Gold, Rainbow

FEATURES:

1. Single coil RTA, compact and powerful

2. Better connect the drip tip with top cap to shorten the air passage and deliver rapid flavor

3. Compressed chamber to provide massive flavor and extreme vaping experience

4. Original pan deck for fast building

5. 2 little airflow walls on the deck for smooth vaping

6. Fixed airflow RTA with optimal air amount and less e-liquid condensates

INITIAL THOUGHTS:

Although this is my first review for Wotofo, this isn’t the first time I’ve reviewed a Wotofo product. The packaging of the Gear V2 was all too familiar in green and black with a clear outer cover that slides off. The rta is clearly visible through the top cover but I was a little surprised that it just said Gear and not Gear V2 on the front of the package.

Instead of being on the back like most samples I receive, the contents list is on the side of the box. Besides the rta, included in the package was a user manual, accessory pack, screwdriver, cotton, and two framed staple Clapton coils rated at .33 ohms. I like that everything you need to do a couple builds is included. I’ve reviewed a couple tanks lately that didn’t include coils or cotton.

As I do with all new tanks, I gave the V2 a good cleaning before putting a build in it. The tank breaks down into three pieces. The top cap with molded drip tip, the center tank section, and the base. The tip and top cap are one piece molded plastic as well as the outer part of the tank section with a stainless steel chamber inside the tank section. The base is of course made of stainless steel. The fill ports are plenty big and I had no issues filling the 3.5ml tank with any of the bottles that I currently use.

The base has two flat head screws to hold the coil in place. Beside each screw is a wall that helps to trap the wire under the screw as well as blocking the airflow that comes from underneath the go directly over the coil. Once the coil is trapped then it is very easy to trim the coil legs. This one is super easy to build.

I used one of the included .33 coils and the included cotton. The cotton included is pretty dense so I did a pretty good comb out on it so that I didn’t have to stuff the cotton wells and tried to keep the wick short enough so it went down in the holes without going all the way down to the bottom. I was probably a little high with the first build but it did work pretty well. After that I lowered the coil which did improve the flavor some.

The airflow on the V2 is fixed and not adjustable. That just seems weird to me. I don’t think I’ve tried another rta that didn’t have adjustable airflow. Wotofo says that the rta is designed with the optimal airflow built into the design. The airflow was fairly quiet but I have to say that if the airflow was adjustable then I would have dialed it in a little tighter. I was however running the tank at 37 watts which was a little lower than the recommended range.

FINAL THOUGHTS:

First of all, I really had a hard time mentally getting past the fact that a lot of the tank is made of plastic. It reminded me of a disposable tank that I received in a kit that I bought a long time ago.

I’ll start off with what I did like about the V2. The deck is a nice size and very easy to build on and trim the coil legs. The tank seems small to me and think that the short height was designed to help maximize the flavor production. It seemed to me that the coil seemed slightly cramped between the build deck walls. I felt that the flavor produced was good but not great. I’d probably give it a 7 out of 10. I’ve reviewed a lot of tanks and this one is good but not the best flavor producer that I have tried.

One thing I didn’t care for was how the drip tip and top cap are one molded piece. Also the top cap is very thin and not easy to get a grip on so I ended up using the drip tip to remove and install the top cap. One other reason I don’t like the molded tip is that I found if I filled the tank to the top that I would get some spit back and the hot liquid hit the back of my throat and made me have a sore throat for a day. If I could have removed the tip then I would have installed an anti-spit back tip on the tank.

I understand why the tank was designed small but found running the included coil that I would go through a tank of liquid fairly quick so a larger liquid capacity would have been much appreciated.

Well, in the beginning I said that I would try to give an honest review and hope that I have done that. I’d like to thank Wotofo for sending the Gear V2 RTA for this review and hope that I have given you the faithful readers enough information to decide whether you would like to try the V2 for yourself.

Wotofo Gear V2 RTA - Making Vaping Simpler But Better

congratulations to our Vaporesso Itank for placing runner-up in the vaping360 - Best Sub Ohm Tanks 2022!

This is going to sound really stupid. I quit smoking 2 1/2 years ago using an aspire K3. I can’t find them anymore and all of mine are completely shot. So I was convinced to buy the Aspire Zelos 3. It looks great and everything but this thing is pretty fancy for me and I have no idea what I’m doing. I use a 70 PG 30 VG juice blend and I just need to know what to set this thing at to have the best throat hit in flavor and I don’t care about clouds. My coil is a 1.8.

what wattage do I set this to?

Just thought I'd say hi to my fellow vapers

Lost Vape Ursa Quest Multi Kit is not just a highly personalized multifunctional vape device but an almighty platform for you to unlock all possibilities. It has the best flavor as a sub-ohm tank, has the same powerful power as a boxed mod, and has a smaller size. The Ursa Quest Multi Kit adopts a stronger zinc alloy with a chassis made of genuine leather and solid wood to form an elegant and luxurious perfect artwork. There are a total of 12 appearance options for the three different series for you to choose from. Ursa Quest Mod uses a single 21700, 20700, or 18650 battery for power supply. When using 21700 batteries, the maximum output power of the kit is 100 watts. The package includes an adapter sleeve for using 18650 batteries. Hight wattage to stay strong and powerful for all-day vaping. The built-in high-performance Quest chipset provides various steam modes, such as Variable Wattage, Variable Voltage, TC, and Bypass, as well as VPC mode for setting your own performance curve and Boost mode with three different intensities. Three additional boost levels, two vape styles, and three user records to provide a highly customized vaping experience.

Ursa Quest Multi Kit comes with 7ml Ursa Pro Pod with 810 drip tip and 6ml Ursa Pod with 510 drip tip. The 7ml Ursa Pro Pod tank is designed for Ultra Boost(UB) Pro coil and Ultra Boost(UB) Pro RBA, suitable for open direct lung suction. A 0.15 ohm UB Pro P1 atomizer coil head is already included in the kit. The 6ml Ursa Pod tank is dedicated to the Ultra Boost(UB) M mesh coil and can also be used for indirect lung suction. The pod has a 0.2ohm Ultra Boost(UB) M4 coil. The pod made of transparent PCTG can be easily filled from the side, and the coil can be easily and quickly replaced by a push-pull style system. The airflow controller is located in the stainless steel pod base, which can be perfectly adjusted to the required draw level using a slider. Using the provided 510 adapters, tank/atomizers with 510 thread connection diameter up to 30mm can also be installed on Ursa Mod.

Features
• Unlock All Possibilities
• New Generation of Quest Chip
• Best Flavor Sub Ohm Pod Tank
• New UB PRO Coil & UB Coil
• Wide Range Airflow
• Power As Strong As Box Mod
• 100W Output With 21700
• Compatible With 21700/20700/18650 Battery
• Faster Type-C Charging
• Five Vape Modes
• Redefined 510 Adapter
• Larger UB PRO RBA Coil
• Two Pod Tank Options
• Visible Capacity and Side Refilling
• Innovative Clip-on Lock
• Genuine Leather and Wood Series

Hello. It’s been a while since I’ve done a review for Sourcemore but here I am again back in the saddle. Today I’ll be covering the new Uwell Caliburn G2 Pod Kit. I have reviewed a lot of pod devices but never did review the Caliburn G but did more recently review the Caliburn A2 and liked it well enough. Where the A2 used disposable pods, the G2 actually has replaceable coils. It also offers adjustable airflow but does it in a really different way than I have seen on any other pod. I’ll get into that more later. The battery capacity of the G2 is 750mah and the included pod has a liquid capacity of 2ml which seems to be very much the norm on many pods.






WHAT’S IN THE BOX?

1* Caliburn G2 Pod System Kit
1* Meshed-H 1.2ohm Coil
1* Meshed-H 0.8ohm Coil
1* User Manual
1* Type-C Charging Cable






SPECIFICATIONS:

Material PA, Aluminum Alloy

Size: 110.5*22.5*13mm

E-juice Capacity: 2ml

Output Wattage: 18W

Battery Capacity: 750mAh

Coil Specification: FeCrAI UN2 Meshed-H 1.2ohm, FeCrAI UN2 Meshed-H 0.8ohm

Charging: Type-C

Color: Carbon Black, Pyrrole Scarlet, Shading Gray, Gradient, Ultramarine Blue, Cobalt Green



FEATURES:

1. Vibration interaction

2. Progressive airflow adjustment

3. Pre-installed meshed-H 1.2ohm coil

4. Compatible with 1.0ohm and 0.8ohm coil of Caliburn G

5. Provide MTL and restricted DTL vaping

6. Comfortable lip fitting

7. Pro-FOCS flavor adjusting tech

8. E-juice check window

9. Convenient top filling

10. Draw-activated and button-activated





















INITIAL THOUGHTS:

I like how the packaging for the G2 has the clear window on the front that allows you to see the actual device and color inside instead of using a generic picture that may or may not be the color of the device you have received. The black with gold writing is quite attractive to me.

The back of the box has quite a bit more information than I’m used to seeing on most devices. There is an interesting rating scale for each coil, a definition for each of the terms used, some features, and of course a list of the contents.





Once opened, you can see the pod device with pod and 1.2 ohm coil already installed as well as the spare .8 ohm coil and charging cable. The user manual and safety cards are located underneath the plastic tray. From what I understand, the .8 ohm coil is the same coil that was included with the original Caliburn G but the 1.2 ohm coil is new to this kit.



On the front of the G2 is the Caliburn name along with the fire button. Below the Caliburn name is the battery indicator light which will show Green=60-100%, Blue= 30-60%, and Red=less than 30%. At the top is a large opening where you can easily see the liquid level of the pod while inserted. The back of the device has the same cut out so you can see all the way through which makes it very easy to see the liquid level. There isn’t any branding on the back side. The flats of the device are smooth while the sides are grooved which gives it a nice appearance as well a nice hand feel. Also on each side is a single airflow hole. The G2 has some built in safety features. Besides vibrating when a pod is installed or when it is plugged into charge, it also gives the following indications.

- Short circuit= the led will flash red three times and vibrate four times

- Low voltage= the led will flash red ten times and vibrate three times

- Over time= the led will flash green five times and vibrate twice

- Open circuit= the led will flash blue three times and vibrate twice

During charging the device led will go from red to blue to green and once it is finished charging then it will vibrate once and the led will be solid green.







The bottom of the G2 is where you’ll find the USB-C charging port so you won’t be standing this one up while charging. Really most pods aren’t good for standing up and I’ve just become used to laying them down when not in use. Above the charging port is the Uwell name molded into the plastic. I believe the body of the G2 is made of aluminum while the base is made of plastic.

As I mentioned earlier the G2 has an internal battery rated for 750mah that can be fully charged in a little over half an hour. To turn on the G2 just press the fire button five times. To activate the output then you can use the fire button or us the auto draw feature. I felt like I got a little stronger output when using the fire button compared to auto draw. However the auto draw on the G2 works very well from what I have experienced. With the adjustable airflow you can get anywhere from a somewhat tight RDL to a tight MTL. I thought that perhaps with the two holes in the body that I might be able to close the airflow adjustment all the way and get a really tight MTL but that wasn’t the case. With the airflow adjuster closed the device is not useable in my opinion. I’ll show a picture later of how to adjust the airflow.



The pod port of the G2 has no magnets. There are two spring loaded contacts inside to make contact with the coil once the pod is inserted. When the pod is inserted, the G2 vibrates to let you know that it has made connection. The pod locks into the G2 very securely and doesn’t come loose accidentally. It’s a little hard to see in the picture but there is a cut out with a rectangular hole and a round hole and a raised ledge around it. The rectangular hole is where the turn wheel for the airflow adjustment rests and the round hole is the airflow opening. There is the same set up on both ends of the opening so you can insert the pod either way and it will still align and work.


Ok, and finally to take a look at the pod. As I mentioned earlier, there are no magnets used on the G2 pod. The coils are a push in style coil but there is a flat side on the bottom of the coil that you have to align with the flat on the pod to get it to seat properly. Once the coil is inserted then pop the mouthpiece off to top fill the pod. There is a red rubber gasket over the fill port opening to prevent from leaking. I do like this better than having to remove a plug to fill. On the opposite side is an opening to let air escape while filling. I use 10ml plastic bottles for most pods and this one was easy to fill quickly with that bottle.

Now on to the airflow adjustment that I have mentioned a couple times earlier. There is an orange turn wheel on the bottom of the pod that you can see in my second picture below. This adjusts the airflow allowed into the pod and turns infinitely with no stop. I kind of wish it did have a stop so that I could better judge where I have the wheel located instead of having to grab a magnifier to see where it is set. Of course I don’t have the best eyesight so others may be able to see it better. As you can see in the picture, I did get some condensation/liquid around that adjuster. I ran the 1.2 coil for four days when this picture was taken. I didn’t get any noticeable liquid outside the pod with the .8 ohm coil.




FINAL THOUGHTS:

I think that Uwell makes some really good pod devices and this is one of them. I ran the 1.2 coil for four days and honestly that was about as long as I could stand it. It just didn’t fit my style of vaping no matter where I set the airflow. At first I thought it was the mouthpiece that was throwing me off since I’m used to using a different pod device with a different mouthpiece. After switching to the .8 ohm coil I knew it was the coil and not the mouthpiece that I wasn’t happy with. I liked the .8 ohm coil with the airflow mostly open. This surprised me as I usually run a 1.2 pod with the airflow somewhat restricted.

The airflow sensor on the G2 works very well. No matter whether I had the airflow wide open or shut down tight, it always worked very well and didn’t take a strong pull even with the airflow open to activate it so whether you like a tight or loose MTL it will work. Also I was able to get a restrictive direct lung with the .8 coil and the airflow open.

I very much like the viewing window for the G2. It’s nice to be able to tell exactly how much liquid is left in the pod. I ran it until the liquid was down to the bottom of the window and then refilled it. Also with the pod being a top fill I didn’t have to remove the pod not only to see the level but to refill the pod. Just pop the mouthpiece off and refill. I will say that so far the mouthpiece is on very tight so it takes a bit of effort to remove it. I would think this would get easier with time but don’t know for sure.

I did get a tiny bit of liquid around the turn wheel adjuster on the pod but nothing to worry about in my opinion and did not get any using the .8 coil. Maybe the 1.2 wasn’t seated all the way or something. Although there are two coils included in the kit, I do wish there were also two pods included. I’d like to be able to run two different liquids by just switching pods or even just to have a second back up for carrying around another filled pod.

Overall I do like the Caliburn G2 and would recommend it. I’d like to thank Sourcemore and Joyi for sending the Uwell Caliburn G2 kit for this review and a big thanks to the readers. Below is a link to the site if you’d like to take a look. Also I have a coupon code for you if you’d like to purchase one.

Uwell Caliburn G2 Kit 18W 750mAh Pod System Kit (sourcemore.com)

Coupon code: CG2P= $18.99

The Lost Vape Orion DNA Go Starter Kit is the modern advancement of vaping technology, integrating Evolv's advanced DNA Go chip within an exquisitely machined chassis in a compact, pod-size structure for a spectacular masterpiece! The Lost Vape Orion is constructed with attention-to-details machining, manifesting a highly durable alloy shell with beautiful real carbon fiber or Abalone details to create a truly luxurious all-in-one, or AIO, pod system. The Orion Vape is powered by Evolv's customizable DNA Go chipset, maintaining the fully sophisticated customizable adjustments, power regulations, and precise output modes Evolv has come to known for. Managed by a responsive bottom adjustment button with corresponding LED lights, the Lost Vape Orion has three standard outputs: Low (White Light), Medium (Blue Light), and High (Red Light). An additional function is added to the device, Replay Functionality, allowing users to precisely save the most recent desired output for future firing levels. Internally, the Orion Vape 40W features an internal 950mAh rechargeable battery with a discreet micro USB port located at the bottom of the device.


Features:

• Internal 950mAh Rechargeable Battery | ~450 Puffs Per Charge
• Advanced Evolv DNA Go Board
• Maximum Wattage Output: 40W
• Replay Functionality - Green Light
• Three Power Outputs: Low (White), Medium (Blue), High (Red)
• Intuitive LED Lights - Proper Mode Assessment
• Highly Responsive Firing & Adjustment Button
• 2mL Refillable Pod Cartridge Design
• Each Pod Lasts About 400 Puffs Per Pod
• Proprietary Pod Cartridge Installation
• 0.25ohm SS316L Orion Pod - Vapor-Focused
• 0.5ohm SS316L Coil Pod - Flavor-Focused
• MTL Delrin Drip Tip
• Dual Adjustable Airflow - Located Below Drip Tip
• MicroUSB Port - Charge & Firmware Upgrade via Escribe
• Short-Circuit Protection
• Weak Battery Protection
• Temperature Protection
• Low/High Resistance Protection
• Frame Colors - Stainless, Black, Blue, Gold Frame, Blue, Red,
• Panel Colors - Carbon Fiber, Gold Abalone, Ocean Scallop
• Now Available in Purple Edition - Phoenix, Ocean Scallop, Carbon Fiber
  

Smok's stunning Novo 4 Starter Kit at ecigmafia is the reliable pod partner you've been searching for! Following in the fantastic footsteps of the pioneering Novo series; the Smok Novo 4 Starter Kit takes a customer-approved design formula and makes it even better with maximum power output of up to 25 watts, leak-resistant internal engineering, an innovative airflow control mechanism, terrific two ml e-liquid capacity, fast charging, and a generous 800 mAh battery for plenty of time off the charger! Whether you are a long-term fan of the Novo series or just finding out -- the Novo 4 is not a kit to miss! Add Smok's Novo 4 Starter Kit to your ecigmafia shopping cart today!


What’s Included

• 1 x Novo 4 Device
• 1 x Novo 4 Empty Pod (2ml)
• 2 x LP1 Meshed 0.8ohm Coils
• 1 x Type-C Cable
• 1 x User Manual

Specs & Features

• Latest Leak Proof Technology
• Air-inlet Ring - Adjustment Airflow
• 25W Max Output
• 800mAh Rechargeable Battery
• Type-C Fast Charging
• 2ml Refillable Pod
• Side Filling System
• New LP1 Meshed Coil
• 0.49inch OLED Screen
• Smart Detection Function
  
  
• One-button design and simple control
  

VOOPOO VINCI Q Pod Kit expresses itself by the classic Vinci series appeal, compatible with Royal Edition and Drag Nano 2 Pod cartridge, it features 2ml vape juice capacity and top filling system, removes the clamshell from the top, and then fill your e-juice. Designed for MTL vaping, it utilizes max 15W output and is powered by 900mAh built-in battery, the LED indicator lights work to remind you of power. Through the magnetic suction, it has a stable connection with the device and helps you enjoy seamless vaping. By using a relatively cool temperature and the 0.8ohm or 1.2ohm coil, it will produce a subtle amount of vapor. MTL is similar to the density of cigarette smoke and is best for people who are new to vaping, on the other hand, it is fit for e-juice with at least a higher ratio of PG for a good vaping experience.


Features

• Compatible With Royal Edition and Drag Nano 2 Pod Cartridge
• 2ml Vape Juice Capacity
• Top Filling System
• For MTL Vaping
• Max 15W Output
• 900mAh Built-in Battery
• LED Indicator Lights
• Magnetic Suction
• 0.8ohm or 1.2ohm Coil


SPECIFICATION

• Battery: Integrated 900mAh Battery
• Wattage Output Range: 11-15W
• Firing System: Button or Draw-Activated
• Capacity: 2ml
• Reisitance: 0.8ohm Mesh Pod - MTL, 1.2ohm Mesh Pod - MTL
  

VINCI Pod Kit Royal Edition not only inherits the portable appearance of VINCI Pod, but also utilizes classical relief sculpture technology accompanied by aeronautical material of 6061 aluminum alloy. VINCI Pod Kit Royal Edition has 800mAh built-in battery with an 11-15W power range. Equipped with a top-fill visible cartridge of 2ml capacity, it is convenient for you to refill it. The upgraded leak-resistant function is applied to VINCI Pod Kit Royal Edition. There are two pods in the package: mesh 0.8ohm pod and mesh 1.2ohm pod. In addition, VINCI Pod Kit Royal Edition is compatible with the cartridge of Vinci Q, Drag Nano 2, and Vinci Pod.


Features
• Aircraft Grade Aluminum Alloy
• Luxurious Royal Edition Printed Pannel
• Exceptional Gene Chipset
• Enduring MTL Vaping
• Max 15W Output
• LED Indicator Light
• 800mAh Internal Battery
• Intelligent Adaptive Wattage Control
• Draw-activated Firing Mechanism
• 2ml Vape Juice Capacity
• Side Filling System
• 0.8ohm Pre-built Coil
• Magnetic Pod Connection

SPECIFICATION

• Dimensions: 93mm by 24mm by 14mm
  
  
• VOOPOO VINCI Pod Device
  
  
• Battery: 800mAh built-in Battery
  
  
• Max Wattage Output: 15W
  
  
• Variable Wattage (VW): 11W-15W
  
  
• Voltage Output Range: 3.2-4.2V
  
  
• Maximum Charge Current: 5V / 1A
  

Continuing the concept of simplicity of the IORE Series, Eleaf IORE PRIME comes in a brilliant elegant design and features easy top refilling solution. It supports two different mesh pods that heat up faster and deliver more enhanced flavor. The airflow control system on IORE PRIME allows you to customize your vaping experience. With its 900mAh battery, IORE PRIME will power you through the day.




Features:
1. Extremely Aesthetic & Minimalist design
2. Customize airflow freely
3. Easy, clean and leakage-free top fill
4. Purer & Smoother Flavor
5. Keep powered up all day long
6. Multiple protections
...

Click here for more:

Iore Prime Pod Kit: Eleaf Iore Prime Pod System Kit

Prizes:
2* Kroma 217 Z Force

2* MVP Pod


We'll have 4 Winners
The first 2 winners will get the Kroma 217 Z Force,
the second 2 winners will get the MVP Pod.
All the entries are optional.
Ends on Jan. 27th, 2022.

Sourcemore x Innokin Kroma 217 Z Force Kit/MVP Pod Kit Giveaway, 4 winners, ends on January 27th

Enter here

Today,I want to introduce you two disposable kits,Lucid Air Disposable Kit 5000 puffs and IJOY LIO Boom Disposable 3500 Puffs.The Lucid Air is a revolutionary new disposable vape pen from Mig Vapor. It has the highest nicotine content of any disposable on the market at 5% Tobacco-Free Nicotine, and it uses mesh coil technology to deliver up to 5000 puffs per cartridge.

The Lucid Air comes with two 16.7ml E-Liquid cartridges for you to enjoy right out of the box! The Lucid Air disposable vape. also comes with its own charging case so you can recharge on the go and enjoy 5000+ puffs from this innovative product!

The new IJOY Lio Boom, by iJoy, is the lastest offering from the factory that manufactures the popular Lio Bee Max. The new Lio Boom features 3500 puffs, a huge 1400mah battery, 10ml tank, and a pre-soaked 1.0 ohm coil (non activated coils proved to be an issue for some users on their previous models).

More best disposable vapes in vape shops near me,you could click to add in your cart.

Quick Link:Lucid Air Disposable Kit 5000 puffs 2200mAh

You may also like:Yocan STIX 2.0 Vaporizer Pen Kit 350mAh

Hey folks,

What is the great news today? Sourcemore brings you the excellent vape kit-Innokin Kroma 217 Z Force Kit


Kroma 217 Z Force Kit is made of high quality zinc alloy and a range of premium material to become elegant and durable. It is composed of Innokin Kroma 217 Mod and Z-Force Tank. The Kroma 217 supports single external 18650/20700/21700 battery. When a 21700 battery is installed, it can reach up to 100W max power. With USB-C charging and industry-leading integrated safety protections, you can enjoy the vaping freely. In addition, the application of Coil+ & Refresh mode can extend coil's life and maintain intense flavor output. The Z-Force tank is able to adjust the airflow and navigate DL and RDL vaping. It is also designed with automatic juice airflow control system to prevent leakage effectively. Z-Force tank features 5ml e-juice capacity and upgraded quick top filling system. It is compatible with DuoPrime ZF 0.2/0.3Ω Coil for DL or RDL vaping respectively.


To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.


Example:
Sourcemore
Ejuice


If you draw a blank post like
'Innokin Kroma 217 Z Force Kit'
The next post will start with Letter 't'

Note:
1. One winner will be picked by random.org on January 28th, 2022.
2. You must be over 21.
3. Number your entry, for instance: #Post 1.
4. Max 3 replies for each member.
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.

The brand may influence your choice of a new product. There are so many vape brands in the market now, how to choose the right one? A popular brand is more trustworthy. Experts from ElegoMall have sorted out the best and hottest vape brands for your reference.


SMOK is the biggest and most popular vape brand in the world. It has the biggest output among all vape brands. But it's not just about quantity, SMOK has some of the highest quality and most loved vape kits on the market today. When it comes to vape kits, SMOK has to be one of the first vape brands to check out. Whether you're looking for a small pod vape or a big box mod, SMOK can meet your needs. SMOK has been committed to the research and development of pod systems in the past two years



When it comes to the best vape brands, Vaporesso will always come into your mind. Unlike many vape brands which create lookalike versions of other products, Vaporesso treads their own path. With many patents, Vaporesso product owns the most advanced vaping technology. Vaporesso is one of the oldest vape brands in the industry, it continues to go from strength to strength.



UWELL changed the industry forever. UWELL was a relatively unknown brand before they released the UWELL Crown vape tank. Crown set a new high bar of flavor. There is no other vape tank that could produce such flavor. However, UWELL didn’t stand still. Nearly 2 years later, They released the astonishing UWELL Caliburn pod vape, their first pod system. Caliburn has raised the bar for all future pod systems and vape pens. From then on UWELL has been famous for flavor. By now, caliburn series has got 7 members.

Learn more about Uwell Wholesale



VOOPOO is the master of mod. They set a new high standard for mods with Drag. Now they continue to redefine vaping with innovations in not only mods but pod vapes. It's no surprise that VOOPOO has built on the success of the original Drag, recently they have released a new improved version of VOOPOO Drag X & Drag S, which use PnP-X Pod.



Freemax strives to continue releasing innovative vapes. Right now one of the most popular vape pens in the industry is the Freemax Marvos T, a super simple to use vape pen. Battery life is excellent but the standout feature has to be the simple wattage adjustment. Simply twist the base to adjust the wattage to your liking. Simple but super effective.



Vbar is new brand which was established at the end of 2020. It strives to produce easy-to-use, portable, convenient and good-taste disposable pods. Thanks to its advanced Atomizing Tech like adopting mesh coil, Vbar was known around the world with its first product - Cubo Pro. By now, it has launched 6 vape kits. Check more best disposable vapes from Vbar.



Suorin deserves to be one of the best vape brand. Suorin Drop is one of the most popular vape kits ever. lots of vapers have a Suorin Drop as a second back up device. Suorin has only released a few products. They focus on quality over quantity. So if you want a vape kit that's going to consistently deliver an awesome vape experience, Suorin is a good choice.



Smoant is known for bringing out some excellent vape devices and kits and it is the most popular vape brand in Russia. Battlestar entered the market in late 2016 as one of the hottest box mods, and its pod system also sells very well.



VOZOL is a new vape brand born at the end of 2018. It is committed to bringing extraordinary vaping products to smokers through scientific and technological innovation. VOZOL released the world’s first dual flavors disposable pod D2. Its bar series is one of the most popular disposable vapes in the market. Learn more about VOZOL Vape.



JUSTFOG is a famous Korea brand. JUSTFOG produces a wide range of vape pens, mods and pod systems with high stability and superior performance such as JUSTFOG 14 Series and JUSTFOG Q16 Series.


Elegomall has always been the authorized supplier of all the famous vape brands. We promise that all the products you order from Elegomall are 100% original brands. Any inquires of vape wholesale in China, feel free to contact ElegoMall.

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall Now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail and then enjoy better price of more latest vape kits.

I'm looking to upgrade my setup & was looking at the Aegis L200.

My current setup is below but was after some of your guys expert advice please

Thanks in advance all.

----------------------
Current setup:
MOD:
Innokin Coolfire Ultra
Settings: 0.43Ni / 50.0w @ 150°C
CROWN:
Uwell Crown IV
COIL:
Crown IV coil 0.4 (subohm)
eLIQUID:
Mothers milk 50VG/50PG

Dinner Lady Tobacco-Free Nicotine Series formulated with nontobacco nicotine is focused on providing an extensive range of the finest premium quality e-liquids through intensive market research of consumers on vaping products. Renowned for the iconic Lemon Tart flavor profile, Dinner Lady E-Liquid have been making exception flavor profiles, introducing new lines such as Summer Holidays, and Dinner Lady Salt.


Features:

• 60mL Chubby Unicorn Bottle
• Child Resistant Cap
• 30% PG
• 70% VG
• Synthetic Nicotine Formulation
• Made in UK
• Available Nicotine: 0mg, 3mg, 6mg
• Manufactured by Dinner Lady Fam (UK)

The Salty One Sweet and Sour Apple Berry eJuice by Beard Vape Co. – An intoxicating blend of sweet strawberries with sour apples. Nicotine salts make this classic duo back to the big leagues to knock one more out of the park with this silky, smooth blend. Whether it’s the strawberry that gives the sweet taste or the sour edge, this iconic fruit pairing is more than capable of giving you both with excellence. Boasting a confection-like charm, this apple strawberry vape juice is going to have you on the edge of your seat. Liven up your life with a very tangy treat that makes every cloud an electrical storm.

Nicotine Salt eLiquid is made with salt-based nicotine at higher nicotine strengths without the extremely harsh throat hit. The main difference of vaping salt-based nicotine is the rapid absorption rate into the bloodstream. Although salt-based nicotine does not absorb into the bloodstream as quickly as combustible cigarettes, its absorption rate is quicker than normal E-Liquid which imitates the rush from a cigarette more similarly. Nicotine Salt eLiquid is specifically designed for Pod-based devices and other low output/high resistance setups. Nic Salt is not recommended for use with RDA’s or sub-ohm tanks and devices

Brand: The Salty One by Beard Vape Co.
Flavor: Sweet and Sour Apple Berry
Size: 30mL
VG: 50%
PG: 50%
Bottle: Chubby Gorilla Unicorn Bottle

Supreme Max Zero disposable is a pre-filled disposable vape pod system device with a compact and pocket-friendly size which makes it easy to carry.

The Supreme Prime disposable features a mesh coil for their 10 delicious flavors. It is powered by an 850mAh built-in battery and has more than 2000 puffs.

Device Details:

• Capacity: 6ml
• Nicotine Strength: 5% (50mg) Nicotine Salt
• Battery Capacity: + 900mAh
• Puff Count: + 2000
• Coil Feature: Mesh Coil
• Disposable: Non-Rechargeable & Non-Refillable
• Flavors: 10 Available Flavors
  

Flavors:

1-Strawberry watermelon
2-Peach Ice
3-Lush ice
4-Blueberry mint
5-pure mint
6-Piña colada
7-Red Apple
8-Black ice
9-gummy bear
10-Macchiato
11-Fresh Lychee

Vaporesso XROS Pod Cartridge is specially designed for Vaporesso XROS and XROS Mini Pod System Kit The 2ml pod capacity can be quickly refilled at any time, via clamshell top filling. It’s extremely easy to refill your e-juice, only one hand is required, and it’s mess-free. In addition, the Vaporesso XROS pod uses a visible transparent style, which will help quickly determine how much e-juice is left, saving you from a burnt coil.

The Vaporesso XROS Pod is available in two designs. The 0.8ohm meshed coil can handle just about any e-liquid and has great flavor and solid vapor production. The tight drawing 1.2ohm coil delivers purer flavor and a tight MTL draw. The original Vaporesso XROS utilizes an adjustable airflow control system and mesh coil will maximize the effectiveness of flavor and nicotine satisfaction. It functions as a button fired and auto-draw vape pod kit. The draw-activated and compact XROS Mini has better battery life and is smaller.


Features:

• Cartridge capacity: 2ml
  
  
• Filling type: Clamshell Top Filling
  
  
• Cartridge Resistance1.2Ω Mesh POD; 0.8Ω Mesh POD
  

Fit for: Vaporesso XROS Kit

Quantity: 2pcs/pack

Oxva Origin Mini 60W 2.200mah, it is a small Aio device, compact and designed to maximize the yield in flavor, however it can also be used with satisfaction in MTL thanks to the internal adjustable AFC system and the wide Unicoil platform which also includes an RBA for DIY.
Enjoy the reading.



► Oxva Origin Mini; Packaging:
The cardboard box shows on the front side; The brand name (OXVA), a circular sticker with information on the color of the sample (Buddha) and the capacity of the pod (4ml). Also on the front, in the center there is the image of the device and the writing "Origin Mini".

On the back side of the package are shown; A brief introduction to the product, the packing list, warnings, useful OXVA addresses, a barcode, hologram, scratch & check, legal trademarks and logos and the wording "Sample".



On the side profile of the package are visible; the writing "Designed By Justin Lai and the main features in the form of icons.



► Oxva Origin Mini; Packing List:
• 1 x Origin Mini Pod Mod (2200mAh)
• 1 x Unicoil 0.3Ω Mesh A1 Range 35-40W (pre-installed)
• 1 x Unicoil 0.2Ω Mesh A1 Range 40-60W
• 1 x Type-C Charging Cable
• 1 x User Manual



► Oxva Origin Mini; Specifications:
• Material: zinc alloy + PCTG + leather
• Size: 120 * 23 * 31.5mm
• Weight: 120g
• Pod capacity: 4 / 2ml (TPD)
• Output power: 5-60W
• Battery capacity: 2200mAh
• Charging voltage: 5V / 2A
• Cut-Off: 8 seconds
• Supported resistance range: 0.1-2.5Ω
• Screen Size: 0.69 "OLED Display



► Oxva Origin Mini; Available colours:
• Golden Vibe
• Black Carbon Fiber
• Buddha
• Eagle
• Brown Ripple



► Oxva Origin Mini; First impressions:
Small, elegant and pocketable.
Top Refill Deisgn.
Compatible with Unicoils 0.2Ω / 0.3Ω / 0.5Ω / 1.0Ω and RBA.
Integrated battery with a capacity of 2200 mAh and power up to 60W.

These are the 4 main features indicated by the manufacturer for this new Mini version clearly based on the "Origin" project. Unlike the Origin X 60W and Origin Aio 40W which were both powered by an external 18650 battery the new Mini relies on a built-in 2,200mAh battery capable of pushing it up to 60W. Furthermore, to improve the feeling with the user, the convenient refill from the top has been introduced on the 4ml cartridge of Origin Mini.
The cartridge remains compatible with Oxva's excellent Unicoil platform. Origin Mini also maintains a certain similarity with previous models as regards the use of the materials used; such as zinc alloy and the neat and elegant IML decoration.
The Origin Mini form factor is still the slim and slender one I already knew, however the device seems to have gained ergonomics with even more compact dimensions.



On the front side of Origin Mini we find the classic arrangement of the control panel with the 0.69 "OLED display in the center which shows all the useful information for the vape, the fonts are quite bright and well readable. On this side there are also the Fire button and the selection button, both circular in shape and with a fine metal texture. At the top there are two air intakes that direct the flow towards the coil in the lower part of the cartridge.

► Oxva Origin Mini; Operation Guide:
• Power On / Off: Press the Fire button 5 times.
• Puff Clear: Press the Fire button and the Adjust button together
• Power adjustment: With the Mod unlocked, press the adjustment button from 5 to 60W with an increase of 1W at a time.
• Lock System: Press the Fire button 3 times to lock / unlock the power adjustment button.

► Screen Alert:
• NO ATOMIZER: No pod are installed.
• SHORT: Short circuit detected
• TEMP TOO HOT: The PCBA temperature is too high.
• BATTERY LOW: The battery voltage is less than 3.3V.
• TIME OUT: The vape time of the single Puff is more than 8 seconds.
• PUFF CLEAR: Clears the number of puffs.
• LOCKED / UNLOCKED: The device is locked / unlocked.
• NEW COIL: When the new Pod is installed (Press the adjust button to clear the message).

► The Photon chip has six levels of security protection;
• Short circuit protection
• Overload protection
• Overcurrent protection
• Overtemperature protection
• Over discharge protection
• Cut-Off 8s





► Oxva Origin Mini; Side and back view:
The metal shell extends almost all over the body, the only exception is the back of the mod which seems to be coated with plastic material with IML decoration technique (very beautiful and colorful). Even the metal parts have eye-catching color combinations, my sample (Buddha) at the top is "bronze" and then fades to black at the bottom.
The painting of the frame and the IML insert appear to be protected by a transparent layer. Origin Mini is extremely smooth and velvety to the touch, I am ready to bet on the good quality of the paint that looks quite resistant.