Howdy folks! I’m back again today to talk about the new Drag X Plus Professional edition mod that was sent to me by Voopoo in order to provide a fair and honest review. Several months ago I reviewed the Drag X Plus which I very much enjoyed testing and used for quite a while. It included the TPP pod tank but this time I only received the mod without the tank. From what I understand there is a new TPP 2.0 tank but I haven’t tried it so can’t really comment on how it is different. However, I just grabbed the TPP tank out of the first kit to test the Professional edition with it. The Pro edition is very similar to the Plus but has one big change in the output that it will provide.







WHAT’S IN THE BOX?

1* Drag X Plus Professional Edition Mod
1* Type-C Cable
1* User Manual




SPECIFICATIONS:

Size 28*34.5*139mm

Battery Single 18650/21700 battery (not included)

Output Wattage Range 5-100W

Input Voltage 3.2V-4.2V

Material Zinc, Leather, PCTG

Output Mode VW, SMART, RBA

Screen Display 0.96 inch TFT screen

Resistance Range 0.1-3.0ohm

Coil Compatibility TPP series coil

Tank Capacity 5.5ml

Tank Resistance TPP DM1 0.15ohm, TPP DM2 0.2ohm

Thread 510

Charging Type-C charging

Color Black+Black, Black+Coffee, Silver+Grey, Silver+Retro Brown, Silver+Blue





FEATURES:

• 1. Supports single 18650/21700 battery
• 2. 5-100W output power range
• 3. Powered by new GENE FAN 2.0 chip
• 4. Comes with new TPP 2.0 Pod Tank
• 5. Supports VW/SMART/RBA mode
• 6. 0.96 inch TFT screen
• 7. Compatible with TPP & PnP & 510 platform
• 8. Type-C charging design
• 9. Two-way convection airway structure
• 10. Magnetic suction pod
• 11. Safety protections: Overtime/Short-circuit/Overcharge/Output Over-current/Over Discharge/Over-temperature/Max Power/Battery Reverse Protection

INITIAL THOUGHTS:

The packaging for the Pro is simple but nice. Upon opening it, I immediately noticed the nice leather on this one. The Drag X Plus that I reviewed before had the light blue brushed material on it. I like the leather look much better on this new one. I like the grey well enough but honestly was hoping for the dark blue one.

The frame of the mod is made from a zinc alloy material and looks nearly identical to the Plus besides the lettering in the leather. The mod supports 21700 batteries as well as the 18650 with the included adapter. It has a range of 5-100 watts and has the Smart and RBA modes just like the earlier model. There are two display types also just like the original which are Iron and Core. I personally prefer the Iron display on this mod as the Core display comes up horizontally so you have to turn the mod sideways to read it.

Facing the display side, you have the fire button that has no rattle on top with the display directly beneath that. Below the display is the + and – buttons with the USB-C charging port below that. To the right of the display there is just “Gene chip inside” etched into the metal. On the opposite side from that is the Voopoo name etched into the metal. On the rear of the unit there is the leather wrap and “DRAG X” stamped in large letters with the word “PLUS” in much smaller letters below that. On top is the 510 connector held in with two screws and it has a spring loaded gold plated center pin. On the bottom is the battery door which has a single arrow indication which way to slide the cover in order to install the battery. It operates very easily. On the inside surface of the battery door it has a – symbol indicating how to install the battery. Everything I described is identical to the Plus except the Plus I received had a suede type finish on the wrap on the back.
















The menu or button operation is fairly simple without a lot of bells and whistles. The button sequences are as follows.

- Press the fire button five times to turn the mod on and off

- Press the fire button three times to switch between Smart and RBA modes

- Press both buttons to switch between the two available display themes which are Core and Iron

- Press the fire button and the + button to lock the device. This unfortunately not only locks the adjustment buttons but also keeps the unit from firing.

- Press the fire button and the – button to clear the puff counter

Once again, this is the same operation as the Plus model. What is the main difference on the Professional edition is that it has the Gene.Fan 2.0 chip with .001 firing speed and Dynamic Stable output and an output range up to 8.5v which means this one has boost where previous versions did not. I was able to run a 21700 battery down until the display showed a tiny red spot in the battery indicator without noticing a difference in the output. This was running a .2 TPP coil at 49 watts. I also tried a 1.2 ohm coil in a different tank and ran the wattage up and was able to get 5.8 volts output on the display. I didn’t want to go any higher or I would have burned the wicking in the coil. However, to me that verified that it does in fact have a boost circuit that works.




FINAL THOUGHTS:

I very much enjoyed testing the Voopoo Drag X Plus Professional edition mod. I do wish that I had gotten the TPP 2.0 tank to try but did not. The Plus and Pro editions are basically identical besides the branding on the leather and the Pro has the boost circuit that will most likely appeal to experienced users. It was a funny coincidence that I received the Pro for review with the boost circuit after just recently being involved in a discussion about whether another device did or didn’t have boost and it ended up that it didn’t.

The Plus and Pro both are very lightweight and on the small side in my opinion for a 21700 mod. Both are comfortable in the hand and I definitely prefer the leather wrap compared to the Plus with the suede feel. I’m sure the boost capability of the Pro will appeal to some and to some it won’t make a difference who don’t know any better.

One thing that I always forget about Voopoo products is once the screen goes dark, you can’t just pick it up and vape on the first fire button press. It’s kind of a safety feature in case you hit the button while picking it up so it doesn’t fire on you. So you have to press the button twice the first time after waking it up to fire the tank. It sounds like a really simple thing but even after using the Plus, Pro, Argus Gt, and some others, I still forget at least once a day. One other thing that I thought was nice was I thought I had a scratch on the screen not realizing that the screen has a plastic film screen protector on it. I just peeled the film off and no more scratch.

Are you wondering if I would recommend this mod? Yes, I definitely would. I really like it and plan on continuing to use it for some time. Here I am at the end of another review. I’d like to thank Chloe and Voopoo for sending the Drag X Plus Professional edition mod for this review. Also a big thank you to the readers. It’s very much appreciated. Below is a link to the Voopoo site if you’d like to take a look.

VOOPOO VAPE Spark Your Moments

Hi everyone and I'm delighted to be here! Like many, I suppose, I stocked up on mail order supplies while I could, but now have an issue since I'm an old retired vet with disabilities and this makes store runs a major ordeal. I need cartomizers (atomizer + tank) for standard Ego batteries and wonder if there's any online vendor doing that these days via a carrier that works. I'm still good on juice. Any links REALLY appreciated and thank you so much!

For sale is a neat little kit from Aspire. If you have a Nautilus X tank, you can use this kit to convert it to an RDTA.

Also in the kit: a 22mm black RDA, squonk pin, additional airflow barrel for squonk mode, and other bits. So, even without the Nautilus X tank, there is a lot to like here. (MVS carries the tank, FWIW). Kit is brand new, never used.

$14 shipped via USPS First Class mail. Payment PayPal F&F. Thanks!

For Sale: DOVPO Topside Dual 200 W Black

Price: $ 80

Condition: Brand New sealed and Unopened

Payment: PayPal or Check

Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.

Thank you for viewing.

Hi ECF,
I was looking to upgrade my tank. I currently have the first Berserker MTL RDA but I've had my eye on the BP Mods Pioneer MTL RTA. Is it a good upgrade over the Berserker or I wont get much of a difference?

In need of the rebuild kit for the Grand. Mine is worn out!

An outstanding UK-based brand, Zeus Juice has gone from strength to strength since their beginnings all the way back in 2011. Now one of the leading and quickest selling e-liquids in the UK market, we caught up with the owners Paul and Tim to find out a little more about this exciting e-liquid brand.

Read the interview here: Vape Superstars: Zeus Juice

Siren MTL RTA V4 is an excellent RTA compatible with all 510 thread device. It can hold 2ml e-juice capacity(Replacement Glass Tube is included in the package). With center-located honeycomb-style airflow holes, Siren MTL RTA V4 allows the airflow to come up straight under the coil. Featuring leakproof bottom airflow system and semi-hidden AFC structure, it would bring dense clouds and flavorful taste. Single-coil two-post style deck enables an easy coil-building and leaves enough spaces for more possibilities on the coils. Digiflavor Siren MTL RTA V4 Tank adopts 510 long/short drip tip and 4 kinds of MTL coils to bring excellent MTL vaping experience and DIY fun for vapers and cloud chasers.


Digiflavor Siren MTL RTA V4 Giveaway, 1 winner, ends on July 27th

Enter here

Lost Vape Hyperion DNA 100C Box Mod⁠ built in the newest DNA 100C chip that created an unprecedented vaping experience, making it stronger than ever in terms of durability and functionality. Hyperion DNA 100C Mod inherit the excellent top-notch and high-end quality of lost vape, it is built with authentic leather to make it comfortable to hold in your hand. Powered by a single 21700 battery, it offers max 100w output to meet all your needs for sub-ohm and RDA vaping. Also, it is compatible with a 20700 or 18650 battery with the help of an adapter. The single battery compartment design makes Hyperion DNA 100C light and small, but very powerful. Moreover, comes with evolv's escribe software, Hyperion DNA 100C offers a wide degree of customization and allows you to configure, monitor, and modify exactly the way you want. The powerful IP68 military grade Tri-Proof makes Hyperion DNA 100C withstand water immersion up to 1 meter for up to 60 minutes, or completely dust-tight and prevent the ingress of dust, and easily against accidental drop and collision. Charging by 3A Type-C Charge, it is faster than most of the ordinary 2a charge devices on the market. waste less time on charging, and enjoy more time on vaping. Based on the extremely accurate temperature control mode, the Hyperion DNA 100C is able to reach temperature quickly and flawlessly for all of the most popular coil materials.

Parameters:
Size: 44.5* 34.5* 95mm
Material: Zinc-Alloy & Liquid Silicone Rubber
Battery: Single 21700/20700/18650 Battery（Not Included）
Power Range: 1-100W
Input Voltage: 3.0V-4.2V
Output Voltage: 0.2V-9.0V
Current Range: 0.5A-30A
Screen Pixel: 0.9“ 80*160
Temperature Range: 200℉-600℉
Resistance range: 0.1Ω-3.0Ω
Coil Material supported: Nickel, Titanium, SS316, KA1, Ni80, Ni90

Features:
Newest DNA 100C chip, military-grade materials
Authentic leather-covered, comfortable to hold in your hand
Powered by single 21700/20700/18650 battery, max 100W output
Military-grade tri-proof, IP68 Waterproof, IP68 Dustproof, Shock Resistant
3A Type-C fast charging
Evolv’s Escribe software, firmware upgradable: replay and boost modes, preheat function, temperature protection
Atomizer protection
Low resistance protection
Short circuit protection
Overheat protection
Low voltage step down protection
Reverse Polarity protection

Packages:
1* Hyperion DNA 100C Box Mod
1* TYPE-C Cable
1* 18650 Battery Adaptor
1* User Manual

Digiflavor Siren MTL RTA V4 is an excellent RTA compatible with all 510 thread device. It can hold 2ml e-juice capacity(Replacement Glass Tube is included in the package). With center-located honeycomb-style airflow holes, Siren MTL RTA V4 allows the airflow to come up straight under the coil. Featuring leakproof bottom airflow system and semi-hidden AFC structure, it would bring dense clouds and flavorful taste. Single-coil two-post style deck enables an easy coil-building and leaves enough spaces for more possibilities on the coils. Digiflavor Siren MTL RTA V4 Tank adopts 510 long/short drip tip and 4 kinds of MTL coils to bring excellent MTL vaping experience and DIY fun for vapers and cloud chasers.



Features:
1. 2ml PEI chamber, leakproof top filling design
2. GTA design deck, easy to build and trim
3. 22mm diameter, fit for 510 thread device
4. Semi-hidden AFC structure, precise airflow
5. Long/Short drip tip options, MTL vaping
6. 4 kinds of MTL coils for DIY fun
...

Click here for more:

Digiflavor S MTL RTA V4: Digiflavor S MTL RTA V4 Atomizer

Description:
Novo X Kit is an upgraded version of the Novo series, which comes with a stylish, ergonomic, and portable design. Powered by an 800mAh battery, it has an adjustable power range of 1-25 wattages. And it utilizes a delicate power button and a trigger system to offer you great convenience. And it is also equipped with a 0.49-inch OLED screen to display the key data. In addition, inhaling through the mouthpiece to start your fresh vaping, will provide you with style and comfort. Besides, it is compatible with two 2ml pods: a dual-coil 0.8ohm pod and a single-mesh 0.8ohm pod, allowing you to enjoy top-level MTL vaping with a satisfying throat hit. Moreover, it adopts a Two-way U-shaped airflow channel to bring you ultra-smooth vapor. Just get one to explore a brand new vaping experience.


Main Features:
1. 2ml e-liquid capacity with side filling design
2. 800mAh internal battery with 25W max output power
3. 2 pod cartridges for your option: DC 0.8ohm MTL Pod and Meshed 0.8ohm Pod
4. Adopts a small power button and 0.49-inch OLED display
5. Supports power adjustment with a click
6. Starts your fresh vaping by inhaling through the mouthpiece
7. Two-way U-shaped airflow channel for smooth vapor
8. Provides a variety of protective functions to ensure that you vape more safely


Specifications:
Brand: SMOK
Product Name: Novo X Pod Kit
Size: 26.5*16.5*92mm
Battery Capacity: 800mAh
Standby Current: < 50uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.0V
Output Power: 1W-25W
Resistance Range: 0.40-3ohm
Charging Voltage: 800mAh
Charging Current: Max 0.68A
Overcharge Voltage: 4.3V
Overdischarge Voltage: 2.4V
Overcharge Current: 1.75A
E-juice Capacity: 2ml
Filling Type: Side Filling


Package Contents:?
1 x novo X Device (800mAh)
1 x novo X DC 0.80ohm MTL Pod (2ml)
1 x novo X Meshed 0.80ohm Pod (2ml)
1 x USB Cable
1 x User Manual

Greetings from Connecticut! I smoked cigarettes for 20 years & "accidentally" quit thanks to Vaping! I'll be coming up on my 2 year Anniversary this month off the Stinkies! I'm jumping down the DIY Rabbit Hole, have everything I need but Flavors, so I look forward to mixing! I enjoy MTL & RDL.
There's so much to learn & share regarding Vaping so I'm happy to be here!

https://www.2fdeal.com/search/?Keyword=hyperion&CateId=Lost Vape Hyperion DNA 100C DNA100C TC VW 18650/20700/21700 Box Mod
Coupon Code:MAPDNA100C

Features
Power Range: 1~100W
Battery: Single 21700 / 20700 / 18650 Battery (Not Included)
Input Voltage: 3.0V~4.2V
Output Voltage: 0.2V~9.0V
Current Range: 0.5A~30A
Temperature Range: 200'F~600'F
Coil Resistance supported: 0.1~3.0ohm
Coil Material supported: Nickel, Titanium, SS316, KA1, Ni80, Ni90
Screen Pixel: 0.9" 80 x 160
Body Material: Zinc-Alloy and Liquid Silicone Rubber

https://www.2fdeal.com/Special-Offer/$36.59 Ultroner Theia Stabilized Wood Pod 1000mAh Kit 3ml

Features
Sevo chipset
Wattage range: 5-30W
Operating mode: POWER
Voltage range: 1.0-8.0V
Cartridge capacity: 3.0 ml
Coil resistance: 0.6/ 1.2ohm
Resistances range: 0.1-3.0ohm
Micro-USB port / charging current 1A
Connector type: crimp, without magnets
Power supply: replaceable built-in 1000mAh
Material: stabilized wood + metal + plastic
Protection: low/high resistance, overheating,
short circuit, overcharge / excessive discharge
Beautiful stabilized wood body
The adjustable top airflow system
Replaceable built-in 1000mAh battery
Two types of the coil for a different flavor
Multiple protections to ensure the safe vape

https://www.2fdeal.com/5avape-aston-22mm-style-bf-squonk-316ss-rda-silver_p16465.html5AVape Aston 22mm Style BF Squonk 316SS RDA

Features
510 threading connection
Diameter: 22mm
Material: 316L stainless steel
Drip Tip: 810
Airflow: Configurable side
Deep pool
Single coil deck
Comes with Squonk / BF / Bottom Feeder Pin


https://www.2fdeal.com/sxk-duetto-lucido-style-22mm-316ss-mtl-rta-25ml-silver_p16624.htmlSXK Duetto Lucido Style 22mm 316SS MTL RTA
Coupon Code:MAPLUCIDO

Features
510 threading connection
Material: 316 stainless steel
Diameter: 22mm
Type: Genesis Tank
Vape Type: MTL
Drip Tip: Steel
Liquid capacity: 2.5ml

Today let's look at the Digiflavor Siren MTL RTA V4. If you're a fan of the previous atomizers in the Siren line or want to pick up a new compact MTL atty, then you'll definitely want to check out it. Here we go!

The Siren V4 MTL RTA is an incredibly compact atty, coming in at an overall diameter of 22mm. Even with its smaller size, it still holds a 2ml e-liquid capacity. You won't be needing to refill too often, but when you do, it can be quickly refilled from the top fill ports. Also, like most MTL RTAs, it's quite easy to build on with the two-post single coil build deck. It's a GTA style like you've seen in previous models, but has been enhanced for a better experience overall.

One of the standout features of the build deck is that it prevents the e-juice from leaking out of the airflow hole. Speaking of airflow, the Siren V4 RTA by Digiflavor sports a semi-hidden adjustable bottom airflow system. Lastly, this rebuildable tank atomizer is primarily constructed from stainless steel material and comes with two drip tips in the box.

Get it here: Digiflavor Siren MTL RTA V4 22mm 2ml

You may also like:
drop solo v1.5 rda review
innokin sensis kit price

This time,I goona introduce you the Novo X Pod System Kit 25W uk that designed by Smok.The classic appearence will attract you.It is lightweight for you to take it everywhere easily.How it does work?Let's check it out.

Discover the SMOK NOVO X 25W Pod System uk in stock, featuring a 1-25W range, OLED Display Screen, and utilizes a 0.8ohm Mesh or DC MTL Pod to create flavored vapor. Outfitted with a 1-25W range, the Novo X Pod System can deliver vapor with different wattages, experimenting to receive the best flavor from your favorite eJuice or nicotine salt.

Encased within the zinc-alloy chassis is a 800mAh rechargeable battery to keep up with the user that is traveling or on-the-go. Operating off a draw-activated firing mechanism, the Novo X Pod System can create vapor on demand and is sure to be a reliable pod system.Please go to vapesourcing.uk to buy.

SPECIFICATION
Size:26.5mm(Width)*16.5mm(Thickness)*92mm(Height)
Battery Capacity:800mAh
Standby Current:lower than 50uA
Output Power:1W-25W
Resistance Range:0.4ohm-3ohm
Charging Current:Max 0.68A
Pod Type:Novo X DC 0.8ohm MTL Pod; Novo X Meshed 0.8ohm Pod
Pod Capacity:2ml
Filling Type: Side Filling
ColorsSilver Cobra, Black Cobra, Blue Cobra, White Cobra, 7-Color Cobra, Black Stabilizing Wood, Red Stabilizing Wood, 7-Color Resin

You may also like:

geekvape obelisk 120 fc z kit
vaporesso swag px 80 510 adapter

Please? SSWeiss7 gmail
Why won’t any of you tell me

I need help. I was saved from smoking like a decade ago now I can’t get anything or don’t know how to. Please help me find stores or mail order vendors to buy ecigs coils and dessert eliquids from to ship to NY state or go to near zip 10536. Please. ssweiss7@gmail

I received pioneer rta from sourcemore for the purpose of this review.



Pioneer rta colors:

- DLC
- SS






Specifications:

- Height: 48.3mm
- Diameter: 22mm
- Capacity: 3.7ml
- Airflow Control Pin: 1.5mm, 1.2mm, 0.8mm


In the box:

1* Pioneer RTA
1* Ultem Drip Tip
1* Clear Drip Tip
1* PCTG Tank Tube
1* Ultem Tank Tube
1* Accessories Pack
1* User Manual







Pioneer rta comes in really nice package where you will receive drip tips, coils, 3 tanks and airflow adapters, really good package. Build quality of the atomizer is really good, nothing to complain about here.






With this atomizer you will receive drip tip preinstalled and in the package you will receive two more top parts of the drip tip, so this drip tip has two pieces. Drip tips are very comfortable for using. If you don't like drip tip from the package you can use here any other 510 drip tip without any problems which is good.

On the top cap you can see heat sinks and you can really easy take off the top cap, all you need is quarter of turn to take it off and when you take it off you can see two fill holes. You can easily fill the tank and holes are big.







With this atomizer you will receive 3 tanks which is great and there is no glass tank in the package. Capacity of the atomizer is 3.7ml which is really good capacity and I belive that many will like capacity here.
On the base you can see two posts and from the other side you can see a block which will reduce the size of the chamber. This design makes chamber really small which improves flavor. Building here is really simple and I belive noone will have a problem here. Under the coil you can see the airflow hole, in the package you will receive 3 different airflow pins which is really nice. You will receive 1.5mm, 1.2mm and 0.8mm so you can find the pin that will work good for you. You can pretty much easy replace the pin from the bottom when you have coil in the atomizer which is really good.
On the base you can see the airflow control ring and on the ring you can see one slot that you will use to adjust the airflow here. When you spin the ring you can use one or more holes but you can also open full slot if you want that.










My thoguths:

So the pacakge is really good, you will receive many things which is really nice. Drip tip is really comfortable for using and maybe one of the best drip tips that I ever used for mtl vaping, also you will receive drip tips with different colors in the package. Top fill is very good and you can fast and easy fill the atomizer here. In the package you will receive 3 tanks which is good and capacity of the atomizer is 3.7ml which is good capacity. Base and chamber are designed that way that when you put the atomizer together chamber is very small. Building and wicking is really simple here and you will have no problems. I really like that we have 3 different airflow pins for this atomizer and also I like how easily you can replace the pin without taking out the coil on the atomizer. Airflow is good and you can use really tight airflow if you want on this atomizer. I have only one con for this atomizer, it is a bit hard to adjsut the airflow when atomizer is on the mod. Flavor on the atomizer is very good and this is easily one of the best atomizer for flavor, I use it every day since I got it, really good flavor on this atomizer. I would suggest you this atomizer, in myt opinion one of the best mtl atomizers for sure.


Cons:

- Hard to adjust ariflow when atomizer is on the mod



Pros:

- Good build quality
- 3 drip tips
- 3 tanks
- Easy to fill
- Small chamber
- Easy to build and wick
- 3 airflow pins
- Good airflow
- Easy to change pins
- 3.7ml capacity
- Good flavor

Thanks sourcemore
You can buy it here: Pioneer rta
Coupon code: BMPR

IJOY LIO Boom Disposable Kit

LIO Boom Disposable is the latest flavor monster of LIO disposable series. Powered by 1400mAh battery with 12W power, it is small in size but big in power and you can enjoy 3500 puffs. LIO Boom comes with a pre-soaked vertical coil and 50mg salt nicotine to bring you best flavor. It utilizes new diaphragm technology and features fashion outlook. There are 10ml prefilled e-liquid. 22 flavors are available for you to choose. 10pcs each pack.

Details:

1. With a pre-soaked vertical coil
2. 1400mAh built-in battery with 12W output
3. 10ml prefilled e-liquid, 3500 puffs
4. Fashion outlook with new diaphragm technology





SMOK Fortis Mod

Fortis Mod features full-grained leather for lighter weight. It derives the nutrition from single 18650/21700 battery (not included), you can charge up quickly via the Type-C port. SMOK Fortis Mod serves your vaping with adjustable power up to 80W with 0.001s instant firing speed. Color-Customized 0.96" TFT screen would bring better vaping experience. SMOK Fortis is compatible with TFV18 Mini Tank to provide rich flavour in a limited time.


Detalles:

1. Aesthetic Mod with exquisite appearance
2. Full-grained leather, handier and lighter
3. Single 18650/21700 battery, 5-80W output
4. Color-Customized 0.96" TFT color screen
5. Max 1.4A fast Type-C charging, 510 base
6. Multiple prtections: Atomizer Detection/Short Circuit/8-second Cut Off/Low Voltage Protection





Auguse Era Pro RTA

Era Pro RTA is a rebuildable tank atomizer of 4ml e-juice capacity. It features knurling design, dual coil deck, bottom and side airflow. You can open or close the juice channel by turning the tank. And the drip tip has 3 layers of heat sink. Some pins are also included in the package to help you get greater vaping.


Detalles:

1. Easy top filling system
2. Knurling design, dual coil deck
3. Bottom airflow and side airflow
4. Drip tip has three layers of heat sink

I know some vapers still exist who still enjoy the Hohm Wrecker G2 but have always wanted a new enclosure that doesn't easily tip over and can hold bigger tanks. Well, I recently had one of my G2's tip over and fall to the floor and one of the battery clips broke. I have had Vorhees Custom mods make mods for me in the past and he does quality work and some cool 3D printed designs. I reached out to him to see if it is possible to get a new enclosure made. If I was going to buy a new enclosure wanted it to be dual 21700 and hold at least a 30mm tank without overhang.

Not only does it hold a 30mm but this is the 41mm Steam Crave Titan V2 on top and just a tiny bit of overhang on the bevel, not the mod.



Got 2 battery doors with it:



And the battery life is excellent with dual 21700's



The man really does quality work and my Hohm Wrecker now has new life. I forgot how efficient the FSK chip is, I have already gone through around 40ml of juice using dual 3.5mm quad-core claptons at 120 watts in the last 2 days and still at 50% battery life left.

He makes some excellent atty stands too, bought another 3 for myself. Not sure if I can post links but in case anyone is interested here is his website. Voorhees Customs



If links are not appropriate then please remove them mods. I am in no way affiliated with him, just a very satisfied customer, and the only enclosure I know of that will accept the FSK G2 chip if you are in need.

Why ? - The many varieties of devices, flavors, and nicotine strengths still available in many places not contaminated by the political whores who apparently hate all tobacco so much that they are willing to jeopardize the lives of many thousands, if not millions, of ex and even current smokers, by killing off the vape industry in favor of their hypocritical agendas of tobacco control.

The fact that vaping tobacco has been proven to be less toxic than lit tobacco products is, to them, all the more reason to restrict and eventually eliminate it. {As has been done in India where all vaping is a crime}

Vaping has been and is still being used by many to wean their way off of nicotine by gradually lowering nicotine concentration - For others who do not want to quit completely vaping offers a much safer alternative to the toxic stew present in lit tobacco, especially cigarettes.

And the fact that vaping for flavor with zero nicotine is available - seems to give them all the more reason to outlaw flavors ?!??!?!

Do they know what they are doing you may ask? - Sure they do, and its all about money. Apparently they make more in tax revenues from old fashioned cigarettes - Still as tax rates go up everywhere on vape products, they may decide there is enough to be made to keep it legal. But don't fool yourself, it has nothing to do with 'saving the children'. In a nation where it may soon become easier, in some places, to buy marijuana than tobacco - I ask who is going to save the children from the political whores who can no longer keep following the mantra that "The road to hell is paved with good intentions"

Who will save the children from them ?

And no I am not against marijuana legalization - but still must point out that tobacco, a mental stimulant, is being downgraded by a drug often used to get 'stoned'

Maybe this is what they want - Not a thinking population of voters - When a stoned population is easier to fool!

The SRPNT RDA By Wotofo is a return of the Srpnt line up with what is technically the second dripper to carry the name.

═╣ SRPNT RDA By Wotofo ╠═

00:00 ◄ Intro and specs
01:37 ◄ Close up and build & wicking
14:05 ◄ Vape
15:44 ◄ Thoughts


Login to view embedded media

Hi

i have bought an INNOKIN ENDURA T18ii, and compared to former vape-pen, it is using a lot of liquid i think. I am smoking 6mg liquid PG70/VG30, and it is using like 10-12 ml Per day (on my Old one i used like 5mg Per day. I am using it with The lowest watt, and with one airhole open.

So, is it just using a lot, or am i doing something wrong?

Hi

I wanted to buy a new RTA. I'm vaping now over 3 Years on my TFV12 Prince with the RBA section. I saw that the OXVA Arbiter (dual coil) has good reviews and many recommendations. But, I'm in Central Europe and it's hard to find that RTA. I could order it directly at OXVA in China but their shipping costs makes the tank a bit expensive. I ordered it from Aliexpress but just learned that the black model isn't available and I canceled the order.

A while ago I ordered a Zeus X (dual rta) clone for 12 bucks. The tank has a good quality. Very smooth threading and a no turbulence. I'm aware that this model is 2 Years old. I assumed that this tank would provide better flavor than the TFV12 Prince RBA since it is older. Often I red that a RTA tank is the better choice. However, nor sure if it makes sense to compare the Zeus X with the Prince RBA. I built the Zeus several times. I find that for this particular tank 2.5mm coils are better suited than 3mm (vape gets a bit too warm). The airflow is actually quite nice and very smooth, comparing to the Prince. I vaped juices which I well know. I have to say, the Prince provides me better flavor, better balanced while on the Zeus it tastes sweeter, but less flavor.

A friend of mine has the Vovpo Blotto which he really likes. For me, the airflow is too restricted even with fully open airflow. The flavor is better, even though not overwhelming. But that can be because of the restricted airflow.

I wonder how much newer tanks are really better in flavor than tanks from 3 or more Years ago.

Since I like to chuck clouds I prefer dual coil setups. What are your opinions? Is the Oxva Arbiter so good as they say? Or are there better options in the market.

Hello to everyone,
I am new to coil building and somewhere somehow I am doing something wrong. I am using Ni80 30ga by vandy vape. These are my Steam Engine calculations but after I get to build the coil, my mod (geek vape aegis max) reads it at around 0.5-0.6Ω and even 0.374. Can anyone help me?
Thanks in advance.