Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!

The DovPo and Bogan Blotto Mini Single is a re-release of the earlier Blotto mini formfactor but with one major difference, the deck has been redesigned to cater for a single coil.

BLOTTO SINGLE MINI - CHAPTERS

00:00 - Intro and specs
01:42 - Close up and build
15:48 - Vape
18:50 - Thoughts

Login to view embedded media

Geekvape Obelisk C Tank - the incredible Cerberus Subohm Tank returns to the market with impressive features. This well-designed 25mm base diameter tank updates its adjustable bottom AFC ring from dual-slotted to tri-slotted. Fill up 4ml or 5.5ml of your favorite liquid with innovative threaded top fill system. Create massive clouds and flavor with new Geekvape S Series Coil (Super Mesh Coil). Enjoy a triple-boosting vaping experience!




Features:
1. Three bottom air inlets
2. Adjustable bottom airflow
3. Top filling design
4. Geekvape S series coil
5. 810 drip tip
...

Click here for more:

Obelisk C Tank: Geekvape Obelisk C Tank

Prizes:
1*VOOPOO Drag X Pro Kit
1*VOOPOO Drag S Pro Kit

We'll have 2 Winners.
The first winner will get the Drag X Pro Kit,
the second winner will get the Drag S Pro Kit.
All the entries are optional.
Ends on Aug. 24th, 2021.

Sourcemore x VOOPOO Drag X Pro & Drag S Pro Kits Giveaway, 2 winner, ends on Aug. 24th, 2021

Enter here

Pod System, Pod Mod, or Box Mod, which type of vape starter kits do you like using in your daily vaping life? As we all know, Freemax Onnix Series Kits are pod system kits, while Marvos Series Kits are pod mod kits, and Maxus Series Kits are box mod kits. As for you, which series do you like best?



Here are some introduction about the different series vape kits:

A. Freemax Onnix Series Kits with OX Platform: Onnix 20W Kit, Onnix 2 15W Kit

OX Platform is Freemax’s new pod system atomization platform for Onnix series products (Onnix 20W Kit, Onnix 2 15W Kit and more Onnix Kits on the way).

B. Freemax Marvos Series Kits with MS Platform: Marvos T 80W Kit, Marvos 60W Kit, and Marvos S 80W Kit

MS Platform is Freemax’s new pod mod atomization platform for Marvos series products (Marvos T 80W Kit, Marvos 60W Kit, Marvos S 80W Kit, and more Marvos Kits on the way).

C. Freemax Maxus Series Kits: Maxus 200W Kit, Maxus 100W Kit and Maxus 50W Kit

Hey guys. Today I get the Wasp King RDA by Oumier for you. As the follow-up to the Wasp Nano and Nano S RDAs, what new changes would it bring us? Let's take a close look!

Firstly, the dripper of this RDA is quite unique. To ensure you'll produce dense vapor with tons of flavor, the internal airflow utilizes a new swirling method which is funneled from two external slots. This also permits a personalized air setting that you may fine-tune to your liking. Compatible with single coil builds, the type of wire you may install can be either wire or mesh coils, both included with the purchase of the Oumier Wasp King RDA.

These coils are also said to have a long lifespan and, in the box, there's both a Fused 0.34ohm and two 0.15ohm meshed coils. The build deck itself features dual posts with integrated airflow to ensure the coils are hit directly by the air. At the bottom of the RDA, you'll find a 510 pin which can be swapped out with the included BF pin if you like to squonk. And, as you can see in the picture below, grooves on the top cap make it easier than ever to remove.

Buy it here: Oumier Wasp King RDA 24mm

You may also like:
wotofo profile mod price
vaporesso target 80 review

Wismec Reuleaux RX G is coming soon.It is a solid and classic vape kit.Let's check it out.

Vape Wismec Reuleaux RX G Starter Kit is powered by single 18650 battery with max 100W output. And Wismec Reuleaux RX G also applied Type-C DC 5V/2A fast charging. Wismec Reuleaux RX G comes with 4.7ml capacity to satisfy your all day vaping. Paired with Reuleaux RX G Tank, it can be compatible with Wismec WX 0.15ohm coil and Wismec WX 0.3ohm coil.

SPECIFICATION
Battery:External 18650 battery
Maximum power:100W
Charging: DC 5V/2A(USB-C)
Charging Port:Type-C Port
Fit for:Wismec Reuleaux RX G Kit, Wismec Reuleaux RX G Tank

Please learn more details from vape shops near me.

You may also like:

freemax maxus 200w metal edition
suorin air plus review

Hey folks,

What is the great news today? Sourcemore brings you the excellent vape kit-VOOPOO Drag S Pro Kit


Drag S Pro Kit contains a 80W Mod of 3000mAh battery capacity and a 5.5ml TPP X Pod. It not only provides the top performance with a toggle switch (on/off button), but also retains the traditional On/Off function of pressing five times. Drag S Pro increases the output voltage to 8.5V, which makes it bring more steady flavor even when the battery is about to run out. In addition, the new GENE.FAN 3.0 chip brings more powerful cloud and more stable flavor for it. Designed with SMART/RBA/TC mode, Drag S Pro will satisfy different vaping needs, Button and Auto mode are also available for you to choose. There is a new airway layout to avoid direct contact with e-liquid. The new TPP X Pod is adapted to the most powerful coil of TPP platform. Drag S Pro will present more precise airflow control and super cloud with the combination of 360° infinite airflow system and bottom airflow. There is also the air holes designed for MTL vaping. Drag S Pro Kit is compatible with all TPP/PnP Coils. So many great functions it have, just get it to enjoy amazing vaping experience.



To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.


Example:
Sourcemore
Ejuice


If you draw a blank post like
'VOOPOO Drag S Pro Kit'
The next post will start with Letter 't'

Note:
1. One winner will be picked by random.org on August 25th, 2021.
2. You must be over 21.
3. Number your entry, for instance: #Post 1.
4. Max 3 replies for each member.
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.

Has anyone figured out a recipe close to ms T’s Caramel Butterscotch Cheesecake? I recently purchased TFA’s Cheesecake graham cracker crust. I can tell you that cheesecake is for sure on of the flavors she used in the recipe. I smelled it and knew instantly. I was totally addicted to that juice. Just curious if anyone has figured out anything similar. I am also knew to making juice. Its confusing. But I am bound and determined to make something similar to that ejuice Thank You ahead of time for responding

Hey there. I am new to the forum but have been vaping since 2013. My current device is a MCV Panzer with Dead Rabbit RDA. I’ve found that tinkering and building coils helped me immensely quit smoking before. And hopefully it will help me again.

Hi,

I have a vape pen with a special charging port. It looks like the head of the vape pen is male and it needs a female charger. I have attached images to this post.

I can not find the charger for it. I would really appreciate it if someone can point me to a site where I can buy some.

Thanks,

RN

Not sure if I'm in the right forum for this...but could use a little help. I picked up a SMRT Rpm rebuildable coil to save money on buying coils. I've done plenty of coil rebuilds in my old drippers so I figured this would be pretty easy. The mesh coils that it comes with are a piece of cake, but since I have a decent amount of round wire of various sizes and gauges and I prefer a single coil for salts, I thought I'd try a few builds.

None of them seemed to fire correctly. Slow ramp up even on higher wattages, lots of tank flooding. I did spaced coils of various diameters and still nothing. Is it because I'm not pre heating the wire? I figured I'd need a smaller diameter coil to get more cotton in the atty head to prevent flooding but even that was off.

Failing that, I can't seem to source higher resistance mesh coils with legs. Are there any sources for these types of coils? I'm assuming I can use cotton pads cut to size when I run out of cotton strips.

Thanks for any insight.

Hello everyone, I am an electronic cigarette user from China, I hope to communicate with you about the use of electronic cigarettes.

Voopoo Drag S Pro Kit with 5.5ml TPP X Pod contains a Max 80W Output Mod with 3000mAh battery capacity and a 5.5ml TPP X Pod cartridge.
It not only provides the top performance with a toggle switch (on / off button), but also retains the traditional On / Off function of pressing five times. Drag S Pro increases the output voltage to 8.5V, which makes it bring more steady flavor even when the battery is about to run out. In addition, the new GENE.FAN 3.0 chip brings more powerful cloud and more stable flavor for it. Designed with SMART / RBA. Voopoo Drag S Pro will satisfy different vaping needs, Button and Auto mode are also available for you to choose. There is a new airway layout to avoid direct contact with e-liquid. The new TPP X Pod is adapted to the most powerful coil of TPP platform and is added a 510 base. Drag S Pro Mod Kit will present more precise airflow control and super cloud with the combination of 360 Degree infinite airflow system and bottom airflow. There is also the air holes designed for MTL vaping. Drag S Pro Kit is compatible with all TPP / PnP Coils (not included).





Features:

Voopoo Drag S Pro reach up to 80W wattage.
One button switch, the boost mode of 8.5V
The new GENE.FAN 3.0 chip
360° infinite airflow system and bottom airflow
Voopoo Drag S Pro works with 3000mah built-in battery.
Continues the premium texture of metal and leather
The air holes are designed for MTL
SMART/RBA/TC mode available
Features Button and Auto mode
Equipped with high sensitive air sensor
5V/2.5A upgraded type-c fast charging
5-80W adjustable power
Compatible with all TPP/PnP Coils
Magnetic suction pod design, Voopoo Drag S Pro is with 5.5ml TPP X Pod, compatible with TPP/PnP Coils,applied New upgraded TPP DM4 coil and TPP-DM1 mesh coil, Drag S Pro is equipped with two TPP coil of 0.15ohm and 0.3ohm
Safety protections: Overtime/Short-circuit/Overcharge/Max Power/Output Over-current/Over Discharge/Over-temperature Protection




More details please check >> https://www.3fvape.com/51520-voopoo-drag-s-pro-pod-mod-kit.html

Ive got a bunch of unused juices that the sealed caps have been opened through shipping. I need to know how to sell them.

Wotofo MDura Mini Mod 80W
Thanks @Sourcemore for sending me this kit for review.
Enjoy the reading.



Wotofo MDura Mini Mod 80W; Packaging:
Anteriorly they are present; the name of the device in large letters and the brand (Wotofo). The transparent plexy allows you to partially see the kit inside. On the back of the box we find the writing MDura, the warnings, the place of production, the manufacturer's email address, the trademarks and logos required by law.



On the remaining sides of the package are indicated; the presence of the Nexchip, the packing list, the color of the sample contained, a barcode and the scratch & check.





Wotofo MDura Mini Mod 80W; The kit includes:
• 1 x MDura Mini Mod
• 1 x Type-C Charging Cable
• 1 x User Manual



Wotofo MDura Mini Mod 80W; Specifications:
• Dimensions: 64x26x50.5mm
• Weight: 92g
• Output power: 5W-80W
• Standby current: <300µA
• Input voltage: 6.4V-7.4V
• Output voltage: 0.5V-8.2V
• Resistance range: 0.1-2.5Ω
• Charging voltage: 5V ± 0.2V
• Charging Current: 2.0A (Max)



Wotofo MDura Mini Mod 80W; Available colours:
• Halftone Black, Halftone Blue, Halftone Red, Halftone Orange.



Wotofo MDura Mini Mod 80W; First impressions:
For this test I received the "Halftone Black" color version which to my taste is the most elegant and less showy one of the lot, thanks to a low color contrast between the frame and the imitation leather decorative element. The chromatic choice offered by Wotofo for this Item is however very wide to satisfy all tastes.

The "Pico Style" design of the Mod is one of the most popular of all time and this new proposal from Wotofo is one of the most elegant and sporty that I have ever handled.
MDura Mini with its gritty and captivating look accepts the aesthetic challenge and seems to win it, it does not look bad even in terms of size and weight.
Below you can see MDura Mini in comparison with other "historical" interpretations that have the same form factor. MDura Mini despite being "rich" in decorations, is on a par with the opponents; very handy, not bulky and rather light.





Wotofo MDura Mini Mod 80W; Front / back view:
The 0.69-inch OLED Display offers the possibility to change 6 background colors, it is quite bright and easily readable thanks to enlarged fonts. The display shows the following information; residual battery charge with percentage, set power, lock / unlock symbol, ohms, volts, duration of the last puff, puff counter.
The Fire button and the rocker of the Up / down adjustment keys are silent during their activation, easily reachable by the fingers and without abnormal movements.

On the back, the leather insert is shaped to adhere perfectly to the palm of the hand, this micro-perforated material is soft and pleasant to the touch.
The metal frame of the frame precisely wraps the leatherette insert, the top / bottom edges are protruding to offer an optimal grip.
Leather and metal complement each other, without a doubt (for me) a beautiful "fashion" with a perfect assembly of the elements.

Dear ECF Friends,

Thanks for your participating~
The Uwell Aeglos P1 Kit Giveaway has ended, please feel free to check the winner below, congratulations!!

#119 @Gonzolis

Please DM us below infos to get the prize shipped, thanks.

Name:
Add:
City:
State:
Post Code:
Country:
Tel:
Email address:

-------------------------------------------------------------------------------------------------------------------

Knock knock~

Here comes Healthcabin new round of giveaway on ECF.

Oh, we are now partnering with Uwell to giveaway Aeglos P1 with 1 luckly winner. Plz feel free to check for more details below.


Uwell Aeglos P1 80W Pod Mod Kit has exquisite size and leather grip for comfortable hand feeling. Uwell Aeglos P1 Pod Mod Kit is powered by single 18650 battery with max 80W output with 5V/2A fast charging and can fire up to 80W output. Uwell Aeglos P1 Pod Mod features internal chipset with multi-protection for more stable and safer vaping and is equipped with 0.96 inch high-definition TFT color screen to show the detailed vaping information. Uwell Aeglos P1 adopts magnetic pod connection and supports airflow adjustment.




Do you wanna test it? Take the chance to join us and win it home for free.


How To Enter?
Word Chain Game - Take the last letter from the last post and post a new word(about vaping) begins with the taken letter.


Example:
Uwell
Luxe
Eleaf
...
So let's start with the word: Aeglos

Note:
1. 1 lucky winner will be randomly selected by random.org on 25th Aug.
2. You must be over 21.
3. Number your entry, for instance: #Post 1, #Post 2...But No Continuous Posts at the same time.
4. Max 10 replies for each participant.


Good luck to you all!

Vaporesso Target 80 Mod Kit with GTX Pod Tank 26 is the new 80W Pod Kit addition to the VAPORESSO TARGETSeries. Vaporesso TARGET 80 is a new 80W Vape Pod Kit supports variable wattage from 5W to 80W. The triangularTARGET 80 MOD body is more ultra-durable and suited to the outdoors. Its rugged appearance outside and the hi-tech Axon Chip inside are combined perfectly to provide an awesome DTL vaping experience outdoors.

With the latest GTX POD TANK, the TARGET 80 Kit is compatible with all GTX coils and delivers a satisfying vaping experience regardless of preference.


Features of Target 80:

Durable Yet Compact
AXON CHIP Inside
3000mAh Battery
GTX Coil Platform
Top Filling

More details, please check >> https://www.3fvape.com/51532-vaporesso-target-80-mod-kit.html

Can u recommend me a battery for longer vaping at 45W only ? Thanks.

VOOPOO TPP X Pod Tank

TPP X Pod Tank is suitable for VOOPOO Drag X/S Pro Kit. It has 5.5ml e-juice capacity, features bottom airflow design. The 360° infinite airflow system and bottom airflow design will bring more precise airflow control and super cloud. The magnetic suction pod will provide the simplest and most sanitary way of refilling. TPP X Pod Tank is compatible with TPP Coils. 1pc each pack.


Details:

1. 360° infinite airflow system
2. 5.5ml e-juice capacity
3. Bottom airflow design
4. Powerful magnet suction pod
5. Compatible with TPP coils





Vaporesso Target 80 Kit

Target 80 Kit is the new 80W pod kit of Target Series. It is more ultra-durable and suited to outdoors with the cage-like frame and triangular structure. Built with 3000mAh battery capacity, it is long-lasting. There are three modes to fit multiple vaping satisfactions: VW mode provides standard and consistent output, PULSE mode keeps boosting and brings more throat hit during consistent output, F(t) mode can vaporize different flavors and is suitable for more e-liquids types. Equipped with GTX Pod Tank 26 of 5ml e-juice capacity, Target 80 is compatible with all GTX coils (triple-silicone version), including the RBA coil. What's more, Target 80 Mod can work with GTX Pod Tank, classic NRG S and GTX Tanks with the 510 connection design. The GTX Pod Tank 26 features precise airflow adjustment and top filling system.


Details:

1. Durable yet compact, perfect for outdoor companion
2. With 5ml GTX Pod Tank 26
3. Compatible with all GTX Coils (triple-silicone version)
4. Hi-tech Axon Chip inside
5. 3000mAh battery capacity
6. Top filling system, precise airflow adjustment
7. VW/PULSE/F(t) mode available
8. 510 connection makes it compatible with GTX Pod Tank/NRG S/GTX Tank
9. Clear 0.96 inch TFT screen with updated UI

Today,I gonna introduce you an elegant and solid Vaporesso TARGET 80 Box Mod.It can be compatible With Vaporesso GTX pod tank and The Classic NRG S and GTX Tanks.

Target 80 is the new 80W Box Mod addition to the Vaporesso Target Series.The triangular Target 80 Mod body is ultra-durable and suited to the outdoors.It's rugged appearance outside and the professional Axon Chip inside are combined perfectly to provide an awesome DTL vaping experience outdoors.

Welcome to vapesourcing.com to get the cheapest TARGET 80 Box Mod

SPECIFICATION
Battery Capacity:3000mAh
Output Power:5-80W
Change Current: DC 5V/2A, Type-C
Battery Display:0.96’’ TFT Screen

Quick Link:Vaporesso TARGET 80 Box Mod 3000mAh

Vaporesso XROS 2 Kit is the new number of XROS series products, it is a pod system kit that will cross the limits. It features adjustable airflow with the upgraded water drop air inlet and you can enjoy different vaping experience from MTL to loose MTL more precisely. XROS 2 is also compatible with XROS series pods (1.2ohm 2ml pod, 0.8ohm 2ml pod), and the new 0.8ohm mesh pod can heat faster and support great flavor consistently. What's more, the SSS Leak-resistant Technology will lock the e-juice inside firmly and prevent from messy leakage. The halo button design will help you avoid unintended activation. There are button-activated and draw-activated modes for you to choose. XROS 2 has 1000mAh battery capacity to provide you long lasting vaping, you can see the real-time battery level with the tiding battery indicator.




Features:
1. Upgraded water drop air inlet
2. SSS Leak-resistant Technology
3. 1000mAh battery capacity
4. Accurate airflow control from MTL to loose MTL
5. Compatible with XROS pods: 1.2ohm pod, 0.8ohm mesh pod
6. Button-activated and draw-activated modes
7. Halo button to prevent from unintended activation
8. Tiding battery indicator to show real-time battery level
9. 150 degree refined curved base made by diamond high-gloss cutting process
...

Click here for more:

Vaporesso XROS 2 Kit: Vaporesso XROS 2 Kit

Freemax Marvos DTL Pod Tank is creatively designed with Marvos DTL Pod and 510 connectors, which can be applied to all Marvos series products. With one Marvos DTL Pod in hand, you can switch freely from one Marvos product to another.

With industry-leading mesh coil technology FM COILTECH4.0 (Tea Fiber Cotton Formula & Military Grade SS904L Mesh), it has outstanding performance in making abundant clouds and marvelous flavors at 20-80W for RDL and DTL vaping, which makes the Marvos DTL Pod even better than the best sub ohm tank in the market.



What’s more, MS Platform is Freemax’s another new atomization platform for Marvos series products (Marvos T 80W Kit, Marvos 60W Kit, Marvos S 80W Kit, and more Marvos Kits on the way), which is inspired from Freemax world-known Fireluke Series.

MS Mesh Coil Series Specifications
Freemax MS Mesh Coil 0.15ohm (Included in the Kit)
Output Power: 60W-80W

Freemax MS Mesh Coil 0.25ohm (Included in the Kit)
Output Power: 40W-60W

Freemax MS Mesh Coil 0.35ohm (Sold Separately)
Output Power: 30W-40W

Freemax MS Mesh Coil 0.5ohm (Sold Separately)
Output Power: 20W-30W

Combining the elements from its predecessors, Zeus Nano incorporates a high dynamic top-to-bottom airflow with excellent leakproof design, combined with Geekvape B Series Coil engineered to provide the flavor satisfaction you deserve.




Geekvape B Series Coil 0.4ohm (25-33w)
Geekvape B Series Coil 0.6ohm (15-25w)
Capacity: 2ml (Spare tube glass 3.5ml)
Diameter: 22*56.55
Filling method: Top fill
Drip tip: 510
...

Click here for more:

Geekvape Z Nano Tank: Geekvape Zeus Nano Tank Atomizer 2ml