Hi,

I have been using Samsung 25 flat tops and AW button tops. They are about 4 years old now and still seem to be ok but I would like to replace them.

Unfortunately there is very little availability. I actually need button top batteries now and I can't find any high discharge ones.

I am an old school vaper using a protank4, vaping at max 23 watts on a .5 to .6 ohm coil with a single 18650, so it's a pretty tame setup.

Can I use one of the high capacity low drain batteries?

Can someone throw at a few battery models that would suit my needs so I can see if I can find them?

Thanks for your help.
Regards Animal Vapist

FreeMax Marvos 60W Kit

Thanks Freemax for sending me the product for free in exchange for my honest evaluation.
Marvos 60W Kit | Freemax - Taste the Clouds, Feel the Flavors!

Freemax almost simultaneously with the device named Marvos T 80W 3200mAh sent me the Tri-Proof Marvos 60W All in One kit. More advanced in shapes, with the adoption of a large 0.96 "color screen and an integrated battery with a capacity of 2.000mAh. The coils used always belong to the performing Ms line with FM COILTECH4.0 technology directly inspired by the various Fireluke tanks of Freemax.

These are the Highlights of the presentation of the new product by FreeMax:
• Pod mod kit with military Tri-Proof technology
• Sliding airflow control
• 0.96 inch TFT screen
• Three output modes: Power, Smart, Bypass
• Compatible with the MS Mesh Coil series
• Uses FM COILTECH4.0 technology
• Built-in 2000 mAh battery with 2A type C fast charging
• Drip tip 810 anti spitting
• 4.5ml Pod Marvos DTL
• Smart FM chip with 0.001 second accelerated ignition
Enjoy the reading.



FreeMax Marvos 60W Packaging:
Shenzhen FreeMax Technology Co., LTD packaging features front; The brand (FreeMax), an image of the kit, the name of the kit (Marvos 60W), the indication on the color of this Sample (Gunmetal), a "Tri-proof" icon, a logo to indicate the link with the Tanks of the Fireluke line and warnings.

On the back we find this list; product specifications, packing list, manufacturer's address, warnings, brands & logos.

Laterally they are present; the name of the kit, social icons of the brand, a barcode, main features in the form of icons, warnings, scratch & check.



Packing List:
• 1 * Freemax Marvos 60W Mod
• 1 * 4.5ml Freemax Marvos DTL Pod
• 1 * 0.25Ω Freemax MS Mesh Coil
• 1 * 0.35Ω Freemax MS Mesh Coil
• 1 * USB Type-C Charging
• 1 * Warning Card
• 1 * User Manual



Technical data:
• Zinc material: alloy + liquid silicone rubber
• Size: 123.6 * 32.6 * 30.6mm
• Weight: 129g
• Pod capacity: 4.5ml
• Compatible MS Coils: 0.15 / 0.25 / 0.35 / 0.5Ω
• Battery capacity: 2000mAh
• Output voltage: 0.7-4.2V
• Output power: 5W-60W
• Charging: USB Type C
• Screen: 0.96 "color TFT screen



Available colours:
• Black, Blue, Gunmetal, Red.



FreeMax Marvos 60W First impressions:
For this test I got the Gunmetal version of Marvos 60W, it is an All in One Tri-Proof IP67 device (the first of FreeMax with these features). So FreeMax Marvos 60W boasts qualities of resistance to dust, shocks and water. The paint appears sturdy with good quality finishes, the display is beautifully colored, very bright and with enlarged and clearly legible fonts.

I was pleased to find on this device the effective adjustable bilateral AFC already seen on Marvos T80 together with the Pod-Tank with replaceable Drip-Tip 810. Also available separately is a valuable Pod-Tank entirely made of Pyrex glass which can guarantee a better aromatic perception of the liquids it contains.
FreeMax claims the "Glass Pod Tank" option was the first in the world to be made available on the market.

Having had previous and positive test experiences with the various Fireluke Tanks installed on the "technologicals" Mod Maxus (50-100-200W) and with the previous All In One Marvos T80 kit, I am very confident also for this new product.



FreeMax Marvos 60W Feeling:
The dimensions of this kit are not particularly small, but this is normal because you have to take into account the IP67 coating and its thick armor. However, the handling is really good thanks to an octagonal shape that is not excessively elongated, the grip is comfortable and ergonomic. The weight is contained in just 129g thanks to the construction of the frame in light aluminum alloy. Liquid silicone rubber (as it is defined) is of the "soft" type but not too much as the name would suggest. Marvos transmits a good texture and a good grip thanks to this material and the numerous engravings on its surface.



FreeMax Marvos 60W Front / Rear View:
The completely transparent Pod is quite bulky but in the overall view the device appears well proportioned.

Going down (from above) on the front side we see the small and unobtrusive wording "FreeMax". The Fire key is slightly protruding and seems to be made of plastic material, however it does not produce any annoying noise it is precise and easy to click.

The screen and the "Up and Down" adjustment buttons are immersed in "liquid silicone". The display shows all the information useful for vaping; graphic level of residual charge, set mode, set power, adjustment lock / unlock symbol (padlock), Volt, Ohm, puff counter, duration of the last puff and indication of the 5 background colors available for the display.
The underlying USB-C port is protected by a sturdy cap for its waterproofness.

In the upper part of the rear area there is the two-way AFC control mechanism. The knob protrudes and is made of sturdy metal, its excursion guarantees a precise adjustment that remains firm in the chosen position. Below we find the inscription Marvos above a satin plate with pleasant bronze reflections.



FreeMax Marvos 60W Side View:
On the side Marvos is almost completely covered and protected. The "liquid silicone" is engraved with five ergonomic grooves on each side and is delimited by border lines of a brighter color.
The two opposing slots for the passage of air towards the coil are completely partializable for the RDL / DL vape and measure 11x3mm each.

Quit 2 years ago so this stuff might be outdated but in mainly mint condition

Price....obviously not able to price it as there is so much stuff...no idea how to proceed really.

Lets say for sake of not breaking rules....1k for everything +shipping.

Got more detailed pics of the tables if need be

The VapingGT GT EPIPE Kit is a unique design epipe vape, comes with 900 mah battery, with PCTG+ Resin material, atomizer is 2.8ml capacity with resistance 0.5ohm.


The Kamry GT Epipe Vape Mod Kit is constructed by the Kamry GT Epipe Mod and Kamry GT E-Pipe Tank Atomizer.
Easy to assemble the mod and the atomizer to form the Kamry VapingGT GT EPIPE with magnetic suction connection.




Features:
One button to start, ne hand to control
GT-Epipe pipe mod with one button design, you can operate it with one hand easily and flexibly
Resin wood color Pipe-style pod system sleek and Elegant, environmentally friendly and natural Button operation, saving energy and power
Product material: PCTG + Resin
Battery capacity: 900mAh
Output power: 5~40W
Capacity of atomizer:2.8ml
Atomizer core resistance: 0.2~2.0ohm



Quick links to view product details as below:

Kamry Epipe GT Kit >> https://www.3fvape.com/50966-kamry-epipe-GT-kit.html

Kamry Epipe GT Mod >> https://www.3fvape.com/50965-kamry-gt-epipe-mod.html

Kamry GT E-Pipe Tank Atomizer >> https://www.3fvape.com/50964-kamry-gt-e-pipe-tank-atomizer.html

Kamry GT Epipe Coil Head >> https://www.3fvape.com/50963-kamry-gt-epipe-coil-head.html

So I have been vaping since 2010, and still use my original REO's with a RBA. Back in the day, I would gift a new vaper with an ego to get them started because it was cheap, simple, and had just enough battery life to not have to recharge constantly. Also, it was easy to switch out attys and try different flavors without worrying about leaky tanks.

I met a young man who smokes 2 packs a day menthol, and is really open to switching. I have a pretty good supply of various flavors of 24mg 80pg/20vg liquid. What can I get him that will make it easy for him to start now (and isn't beyond my ability to help)?

Today,I wanna itroduce the Yocan Armor Plus Wax Pen Kit uk for you.It looks slim and elegant,easy to grip and put in your pocket.How does it work?Let's check it out.

Armor Plus Vaporizer uk cheap is an updated version of Armor Wax Pen. Yocan Armor Plus increases the battery size up to 650mAh and is slightly bigger than the original. It uses Micro-USB charging for convenient charging even on the go. The variable voltage settings have been set at 3.4V, 3.8V, and 4.2V. The voltage level is indicated by the 3 blue LED lights above the button.

The pen comes with the QTC Coil(Quartz Tri Coil) and QDC CoIL(Quartz Dual Coil), the QTC Coil produces giant clouds and hits, perfects for cloud chasers. The QDC Coil provides you with the purest experience, guarantees a clean and smooth essence. QDC Coil and QTC Coil are included, get Armor Plus Kit for strong and smooth hits!

Please click best online vape store to learn more details.

SPECIFICATION
Dimensions:117*16mm
Voltage Range3.4-3.8-4.2v
Battery Capacity:Built-in 650mAh Battery
Coil:QTC Coil And QDC Coil Included
ChargingMicro USB Port
ColorBlack, Silver, Green, Rose Gold, Red, Royal Blue

Quick Link:Yocan Armor Plus Wax Pen Kit 650mAh

Kamry GT ePipe Kit

GT ePipe Kit is combined with GT ePipe Mod and GT ePipe Atomizer. The Kit is made of PCTG and Resin for durability. Kamry GT ePipe Mod comes with built-in 900mAh battery, the chip would provide multiple protections for longer life-span. Featuring one button design, it is easy and flexible to operate the kit. With magnetic suction connection, 2.8ml GT ePipe Atomizer is easy to use and assemble. The two airflow hole and Resin mouthpiece guarantee wonderful vaping experience. Kamry GT ePipe Tank Atomizer is compatible with 0.5ohm GT ePipe coil.

Details:

Size: 54*104.5*42mm
Material: PCTG & Resin
Capacity: 2.8ml
Battery: Built-in 900mAh
Resistance: 0.2~2.0ohm
Output Power： 5-40W
Color： Wood Grain





Steam Crave Mini Robot Tube Mod

Mini Robot Tube can work with single 18650 battery, supports 3 adjustable output: 3.5V, 3.8V and 4.2V max power. It is made of full stainless, comes with engraving and corrosion craftmanship, which make Mini Robot Combo more exquisite. It is equipped with a proprietary waterproofed chipset to protect Mini Robot Combo from leaking e-juice or those that are prone to accidents.

Details:

1. 3 adjustable output: 3.5V, 3.8V and 4.2V max power
2. Made of full stainless steel
3. With CNC engraving and corrosion craftsmanship
4. Supports single 18650 battery
5. LED light indicator, with waterproof chipset
6. Multiple protection: Over Temperature/Battery Reverse/Low Resistance/Over-current/Short Circuit/Low Battery/10s Over Time Protection





GeekVape Obelisk C Cerberus Tank

Obelisk C Tank is the incredible Cerberus Sub Ohm Tank with 25mm base diameter. Designed with an adjustable tri-slotted bottom airflow ring to control the inflow of air, it will create thicker vapor or richer flavor production. The knurled and threaded top cap design makes top filling system leak-proof and convenient. Obelisk C Tank has 5.5ml capacity with a bubble glass tube or 4ml capacity with a regular glass tube. There are new GeekVape S Series Coil for Obelisk C Tank: single mesh 0.15ohm coil (40-55W), and dual mesh 0.25ohm coil (80-90W).

Details:

1. Tri-boosting flavor
2. 25mm base diameter tank
3. Tri-slotted bottom AFC ring
4. Adjustable airflow, top filling system
5. 5.5ml/4ml e-juice capacity
6. Adopts new GeekVape S series coil

Hello again. Today I’ll be taking a look at the Freemax Onnix 2 pod system that was sent to me by Freemax for the purpose of providing a fair and honest review. I never had the opportunity to try the original Onnix so can’t really compare them very much. I do know that the original Onnix had a 20w output while the Onnix 2 has a 15w output. I believe that the original was targeted at RDL while the 2 is targeted at MTL. I guess it depends on what kind of airflow you like on MTL. Before I get too far into it, let’s see what’s included and take a look at some pictures provided by Freemax.







WHAT’S IN THE BOX?

1* Freemax Onnix 2 Battery
1* Freemax Onnix 2 Pod 2ml (OX DVC Coil 0.8ohm pre-installed)
1* OX DVC Coil 1.0ohm
1* Type-C USB Charger
1* Warning Card
1* Warranty Card
1* User Manual




Normally I would include a picture of the kit I received here but I in fact did receive the same one in the picture above so didn’t really see a need.


SPECIFICATIONS:

Size

15.3*24.4*109mm

Pod Capacity

2ml

Coil Compatible

OX DVC 0.8ohm & 1.0ohm & 1.2ohm Coil

Battery Capacity

900mAh

Output Voltage

3.6V-4.2V

Output Wattage

7W-15W

Material

Aluminum Alloy + PET + PCTG

Color

Black, Grey, Green, Red, Blue, Pink




FEATURES:

1. 15W compact pod system with 2ml pod

2. Automatic resistance recognition for great MTL vaping

3. 900mAh internal battery capacity

4. 1.5A type-c fast charging

5. Comes with OX DVC Coil 0.8ohm & 1.0ohm

6. Equipped with FM SaltCoilTech 3.0

7. Button activated and draw activated modes

8. Anti-fingerprint and scratch-proof exterior material

9. 100% flavor categories compatible

10. Stylish panel options

























INITIAL THOUGHTS:

When I opened the package of the Onnix 2, I was rather excited to have received the blue version. After all, blue is my favorite color. The grid of lines on it remind me of a printed circuit board or something like that.

On the face of the unit is the FreeMax name in white and a single fire button. On each side it is just a solid color with a single airflow hole on each side. On the back is simply the name ONNIX 2 in white. The USB-C charging port is on the bottom and of course the magnetic pod with replaceable coil is inserted in the top. The two magnets that hold the pod in place are fairly strong and once close enough will pull the pod in the rest of the way by themselves.












The Onnix 2 comes with a single pod but two coils. The .8 ohm coil is pre-installed but has a sticker over the bottom so you don’t accidentally fire it before filling the pod. The other coil that comes included is a 1.0 ohm coil. There are also two other coils available but not included in the kit. There is a .5 ohm mesh coil and a 1.2 ohm coil. From what I understand, the .5 coil is not compatible with the Onnix 2 but will work with the original. The Onnix uses what Freemax is calling the OX series coils. From what I understand, the OX coils can be used on the original Onnix as well as the Onnix 2.


The pod itself is almost clear which I very much appreciate. I’ve been using the Onnix 2 at work with a clear liquid. I can even see the blue o rings clearly through the pod. The pod holds 2ml of liquid which seems pretty standard compared to other pod devices of this size that I have tried. The plug that covers the fill hole has Freemax stamped in it and can be rotated out of the way for filling but is easy enough to hold while filling. One nice thing about this one is that the plug is not just a rectangular piece but has a lip that comes down toward the bottom of the pod that makes it easier to get ahold of. I appreciate that. Some pods I’ve tried, I’ve had to grab a small screwdriver to pop up the fill plug because I simply can’t grab them to remove.










The Onnix 2 comes with a film covering over it that peels right off for use. I suppose it’s to protect the finish in shipping. The battery portion of the Onnix 2 can be used in auto draw or press to fire. Five clicks of the fire button turns the device on. Three clicks of the fire button will disable the fire button and work in auto draw only. That’s pretty much it since there isn’t a screen with menu or anything. It does have a blue light on the bottom and three light indicators towards the bottom of the side with the button that indicate battery level. The blue light is illuminated when firing and afterwards the battery indicator(s) light depending on the level of the battery. One light indicates 0-35% battery, two lights indicates 36-70% battery, and three lights indicate 71-100% battery.






FINAL THOUGHTS:

I have enjoyed testing the Onnix 2 and plan on putting it in rotation with my other work pod the XROS. I need a pocket friendly device that will sit in my front shirt pocket without being noticed but yet provide a strong enough vapor to satisfy me. I of course will need to get some spare coils and maybe a pod or two for back up. So far I have been using it with a clear mint liquid at work for about a week and have noticed no reduction in performance.

Freemax says that it auto senses the coil resistance. I’m not sure exactly how that works but would say that it does. The Onnix 2 has a 900mah battery which is plenty for a device like this. It fully charges in about 60 minutes. The 7-15 watt output gives a nice strong vape in my opinion. It can vary depending on the coil used and the remaining battery level. I know they say that it is targeted at MTL vaping but with the .8 coil it is a pretty loose MTL. Those that like a tighter draw may not like it. The Onnix 2 does not have airflow control and perhaps that would have made it appeal to more people. I was a little concerned about how well the auto draw would work with such a loose airflow but it has been working well for me. I have run into one or two before where the auto draw doesn’t work well until you tighten the airflow control but this one doesn’t have it and doesn’t need it. However, if you put a finger over one of the airflow holes on the side it will considerably tighten the draw. I personally prefer a loose MTL. The 1.0 ohm coil has a little more restricted airflow and doesn’t seem as warm. I really prefer the 1.0 ohm coil over the .8 coil so will probably go ahead and get some spare 1.0 coils for back up.

In my opinion, the Freemax Onnix 2 is one of the better small pod devices that I have had the pleasure of testing. It’s a nice size for carrying in a shirt pocket which I plan on doing.

I’d like to thank Freemax and Jerry for sending the Onnix 2 for this review. Also a big thanks to those that take the time to read my reviews. Below is a link to the Freemax website if you’d like to take a look.

Onnix 2 15W Kit | Freemax - Taste the Clouds, Feel the Flavors! (freemaxvape.com)

The Geek Vape G18 Starter Kit is exactly what the name suggests, a pure traditional pen style starter kit with the same shape and styling of the older starter kits that many will remember from 3 to 4 years ago. The difference however is this one is using much better coils and has far more battery life than the counterparts in 2015/16 had.

00:00 ◄ Intro, specs and close look
02:03 ◄ Vape
08:19 ◄ Thoughts


Login to view embedded media

I'm sorry if this has been asked before, but I can't seem to find these basic infos easily anywhere, so here it goes:

1. My top cap and tank are extremely tight, so I have a hard time everytime I need to pop it open, be it for adding more juice or to fiddle with the build inside the atomizer. Is there any way to lubricate it or something so that it'll slide open more easily?
2. I've been using the Gen S kit atomizer, with coilheads, and I've noticed a huge difference in the ramp up time when switching through to my new Creed RTA. Now everytime I take a puff, it starts with almost no flavor and suddenly it gets too hot for me to vape. I can't seem to find a sweet spot. Tried higher wattages but it just gets really hot really fast. Back to the coilheads, I can drag for like 5 seconds without a hassle. Now it's just too intense or not intense at all. Like it's 0 to 30% power in 10 seconds and then 30 to 100% in 1 second.
3. I'm really new to this, so I would appreciate any suggestions on coils/builds. I'm using dual coils on a Gen S mod, set on pulse mode, trying to vape at 65 - 80W.

The authentic SMOKTech SMOK Nord 50W Pod System Vape Kit continues the superior and stable performance of the SMOK NORD Pod Mod, it comes with an internal 1800mAh battery that brings you up to 50W of power to your satisfaction. The 1800mAh built-in battery brings long-lasting life, the Type-C 1.2A maximum charge current makes fast charging stable and more efficient. Up to 50 watts of horsepower can easily handle all of your vaping needs, ensuring worry-free vaping all day long. The flashing frequency of the white LED light can show various function protections and tell you the status of the device.

Thanks to continuous optimization and stable iterations, the newnord 50W sets new standards for the nord series with an internal 1800mAh battery bringing you up to 50W of power to your satisfaction. The kit includes two versatile pods that work perfectly with the upgraded airflow system to deliver scrumptious flavor and massive vapor: one is the nord pod compatible with nord coil series, and the other is the LP2 pod compatible with LP2 coil series with enhanced leak-proof technology. Based on the classic appearance, the Smoktech nord 50W Pod advances into two collections featuring a variety of colors and premium textures to match your mood of the day. Innovation keeps changing the vaping experience!


More details for this SMOK NORD 50W 1800mAh VW Pod, please check > https://www.3fvape.com/50944-smok-nord-50w.html

Mod: Eleaf Pico Squeeze 2, 100W, 18650/21700 - includes extra unused bottle, user manual and 18650 battery adapter. The mod is in excellent condition as it was relegated to desk duty for its entire life. Mod will take up to a 25mm RDA with no overhang. I will include a 21700 battery if the buyer so desires but it probably could use a re-wrap.

Atty: Geekvape Ammit MTL 22mm BF RDA - One of my favorite BF RDAs. I currently own six of them. Incredibly easy to build, MTL or restricted DLH, awesome flavor and darn near leak proof. Includes spares and two extra drip tips.

$42 shipped for the combo via USPS Priority Mail. Payment PayPal F&F.

Geekvape Obelisk C Tank comes with 25mm diameter and 810 drip tip. Geekvape Obelisk C features adjustable tri-slotted bottom airflow ring to control the intake of air. Obelisk C Tank inherits the classic top filling design with 5.5ml bubble glass tube(4ml spare glass tube in the package). Obelisk C is compatible with Geekvape S series coils, such as: 0.25Ω dual coil and 0.15Ω coil.

Parameter:
Size: 25* 43mm
Capacity: 5.5ml/4ml
Resistance: 0.25Ω dual coil(45-55W)
0.15Ω coil(80-90W)
Drip tip: 810 drip tip
Thread: 510

Features:
Three bottom air inlets
Adjustable bottom airflow
Top filling design
Geekvape S series coil
810 drip tip

Packages:
1* Geekvape Obelisk C Tank
2* Geekvape S Series Coils(Pre-installed: 0.25Ω Dual Coil, 45-55W
Spare: 0.15Ω Coil, 80-90W)
1* Spare Glass Tube(4ml)
1* Spare Parts Pack

https://www.2fdeal.com/search/?Keyword=Siren&CateId=$26.9 Digiflavor Siren V4 MTL 22mm RTA
Coupon Code:MAPSIREN4

Features
2.0 (MTL Ni80 Clapton 1.2ohm Coil / MTL Ni80 Fused Clapton 1.4ohm Coil)
2.5 (KA1 Braided 0.65ohm Coil / MTL SS316 Fused Clapton 1.0ohm Coil)
Single-coil two-post GTA design deck, easy coil-trimming and coil-building
Precise Airflow Control: semi-hidden AFC structure, center-located honeycomb-style airflow holes, bottom adjustable airflow system
Leakproof Design
2ml PEI chamber
Top filling design
Long / Short Drip Tip Options
Diameter: 22mm
2ml PEI chamber, leakproof top filling design
GTA design deck, easy to build and trim
22mm diameter, fit for 510 thread device
Semi-hidden AFC structure, precise airflow
Long/Short drip tip options, MTL vaping
4 kinds of MTL coils for DIY fun


https://www.2fdeal.com/search/?Keyword=airgo&CateId= IJOY Captain AirGo Pod System Kit 930mAh 5.5ml

Features
Material: metal & leather
Chipset: Univ pro 3.0 chipset
Battery: 930mAh built-in battery
Charging Port: Type-C
Capacity: 5.5ml
Resistance: 0.8Ω
The first IP68 tri-proof auto-draw pod kit
14mm thickness, slim, compact and durable
Internal 930mAh battery
Type-C Quick Charging
Univ pro 3.0 chipset
Dual Firing Mechanisms: Auto Draw or Button Activated
5.5mL Refillable Pod Capacity
AirGo 0.8ohm Mesh Coil for premium flavor

https://www.2fdeal.com/_p16671.html5Avape Four One Five 415 S61 V2 Genesis 22mm RTA

Features
SS316
Capacity: 3.0ml
Airflow adjustable
AFC: 0.9mm~1.1mm


https://www.2fdeal.com/2-packs-seawolf-bacon-premium-quality-cotton-10pcs_p16759.html2 Packs Seawolf Bacon Premium Quality Cotton - 10pcs

Steam Crave Mini Robot RTA is a rebuildable tank atomizer for MTL vaping. It has two types of capacity: 2ml (straight glass) or 3ml (bubble glass). It is easy to build with single coil deck. And you will enjoy different and great vaping experience with various air pins options and top airflow design.
Features for Mini Robot MTL RTA:
MTL RTA bringing top flavor
2 post Single coil deck design with easy building and convenient operation
Top filling design with 4 filling openings
Leak-proof top-to-bottom airflow with 2 opposing air pins in the top section
Exchangeable air pins: 2x 1.6 mm, 2x 1.2 mm, 2x 0.8 mm, 1 x blind included
2ml (straight glass) or 3ml (bubble glass) e-juice capacity

More details for this MTL RTA from Steam Crave, please check >> https://www.3fvape.com/50954-steam-crave-mini-robot-rta-mtl.html

Hey guys. Have you used the Era MTL RTA by Auguse before? Today let's look at their Era Pro RTA which is said to be better than the previous Era MTL. Here we go!

Auguse Era Pro is a single-coil RTA made of durable stainless steel and Pyrex glass tubes, the knurled engraving on the top makes it look very textured. Measuring 22mm in diameter, it can store up to 4ml of e-juice and adopts a top filling system. Featuring a bottom airflow and side airflow system, the Era Pro comes with 4 customizable airflow sizes for the side airflow: 0.8mm / 1.0mm (pre-installed) / 1.2mm / holeless airflow control pin (included) and comes with 3pcs x 1.0mm airflow pin for the bottom airflow.

The side airflow can be closed by a holeless AFC pin. Also, the AFC ring with 7 level airflows: 1.6mm x 3.6mm, 1.8mm, 1.6mm, 1.4mm, 1.2mm, 1.0mm, 0.8mm, meeting your personal vaping demands. The Era Pro RTA tank adopts a dual coil deck design for convenience to the building and can open/close the e-juice channel by turning the tank. Moreover, the drip tip with 3 layers of the heat sink. All in all, this RTA is well worth a shot.

Buy it here: Auguse Era Pro RTA 22mm 4ml

You may also like:
smok stick r22 kit price
vaporesso xros kit review

The Geekvape L200 Box Mod uk is designed to be water and shock resistant, making it the ideal companion for anybody looking for a long-lasting and functional device.



The Aegis, with its sleek and elegant design, demonstrates that durability does not have to be sacrificed for appearance! This mod can fire at up to 200W and is powered by two 18650 batteries (not included), and will make an awesome all-day vape partner for anybody looking for a long-lasting, life-proof Mod.

The online shop Geek Vape uk Aegis Legend 2 is the finest dual battery box mod on the market, made from quality materials and finished to a high standard.

With an extremely tough finish, the Legend will run no matter what the conditions or circumstances are, it can take a beating, making this an excellent choice for anybody who works out in the open or is prone to damaging their mod.

Welcome to vape shops uk online cheap to learn more details.

SPECIFICATION
Battery:External dual 18650 batteries (not included)
Output Power:5W~200W
Maximum Output Current:45A
Maximum Output Voltage:12V
Resistance Of Atomizer:0.1ohm - 3ohm
Charging Port:Type-C Port
Display Screen:1.08 Inch, TFT Color Screen
Low voltage warning:3.2V±0.1V
PCBA Temperature alarm:80℃
Longest vaping time:10s
Stand-by current:< 10uA
Operating Temperature:0℃～45℃
Storage Temperature:-20℃～60℃
Relative Humidity:45%RH～75%RH
Colors: Silver, Grey, Black, Blue, Red, Rainbow

Quick Link:Geekvape L200 (Aegis Legend 2) 200W Box Mod

Steam Crave Mini Robot RTA

Mini Robot RTA is a rebuildable tank atomizer for MTL vaping. It has two types of capacity: 2ml (straight glass) or 3ml (bubble glass). It is easy to build with single coil deck. And you will enjoy different and great vaping experience with various air pins options and top airflow design.

Details:

1. For MTL vaping, top refill
2. Single coil deck, top airflow
3. Various air pins options for your airflow
4. 2ml (straight glass) or 3ml (bubble glass) e-juice capacity





SMOK Nord 50W Kit

Nord 50W Kit sets new standards for NORD series. With a variety of colors and premium textures, SMOK Nord 50W Pod Kit delivers an iconic impact on the classic appearance. Nord 50W Pod System Kit features internal 1800mAh battery to bring you 50W max output. The air intakes on both sides can be adjusted by moving the air switch on the back of the device. The kit includes two versatile pods that work perfectly with the upgraded airflow system to deliver scrumptious flavor and massive vapor. Three refillable pods of 4ml (Nord 50W LP2 Pod), 4.5ml (Nord 50W nord Pod), and 4ml (Nord 50W RPM Pod, sold separately) bring you delightful puffs. Regular Series and Leather Series are available here.

Details:

1. Regular Series and Leather Series bring dual pleasure
2. All-day 1800mAh battery life, worry-free vaping all day long
3. Flashing frequency of the white LED light show the status of the device
4. Leakproof technology pod (coil silicone rings & pod base part)
5. Meshed coil with the saturated cotton for smooth flavor and rich vapor
6. Adjustable airflow, achieve the ideal vaping style
7. Nord 50W LP2 Pod (compatible with LP2 coil series, 4ml)
8. Nord 50W Nord Pod (compatile with nord coil series, 4.5ml)
9. Nord 50W RPM Pod (compatible with RPM coil series, 4ml, sold separately)
10. 1.2A fast charging, stable and more efficient





Steam Crave Mini Robot Combo Kit

Mini Robot Combo Kit is a 23mm portable MTL VV kit. It can work with single 18650 battery, supports 3 adjustable output: 3.5V, 3.8V and 4.2V max power. The whole kit is made of full stainless, comes with engraving and corrosion craftmanship, which make Mini Robot Combo more exquisite. It is equipped with a proprietary waterproofed chipset to protect Mini Robot Combo from leaking e-juice or those that are prone to accidents. Mini Robot Combo is packed with 3ml/2ml Mini Robot RTA. With single coil deck, top airflow and top refilling designs, it will provide you easy, satisfied vaping experience. In addition, various air pins are available for you to choose to enjoy different flavors.

Details:

1. 23mm portable MTL VV SteamStick
2. 3 adjustable output: 3.5V, 3.8V and 4.2V max power
3. Made of full stainless steel, with CNC engraving and corrosion craftsmanship
4. Supports single 18650 battery
5. LED light indicator, top refill
6. With waterproof chipset
7. Single coil deck, top airflow
8. Various air pins options for your airflow
9. Multiple protection: Over Temperature/Battery Reverse/Low Resistance/Over-current/Short Circuit/Low Battery/10s Over Time Protection

Quick question for the masters....

Im trying to make Green apple solo juice with taste exactly like Chupa Chup green apple lollipop. Im sure You had one of those and you know how amazing they taste. Sweet, crisp, acidic with green apple flavor in your mouth.

Is super sweet -CAP will be best choice or Flavorah sweetness to make fruit pop out more?
so far I think CAP super sweet will do that after some research.

so far I have FLV green apple and TFA green apple they are both nice.

I cant find anywhere recipe to be as close as possible to Chupa Chup lolipop taste any ideas what should I use to make it happen?

Thank You so much for your time and your undivided attention !

This thread is for the general discussion of the Product Geekvape Obelisk C Tank! Tri-boosting Flavor.. Please add to the discussion here.

Voopoo Seal Kit is a brand new series of VOOPOO Pod Mod Kit. The Kit is combined with Seal Mod and PnP MTL Pod, it is covered with skin-friendly liquid silicone for compact feel. The built-in 1200mAh battery garantees 5-40W max output with Type-C charging port. Zinc-alloy shell provides IP66 protection, preventing water and dust intrusion or shock from light falls. The PnP MTL Pod has 2ml capacity, the magnet pod installation design brings more convenience. Bottom fill system with an silicone stopper would provide a higher level of protection for your e-juice. And the PnP MTL Pod is compatible with PnP-TR1 1.2ohm & PnP-TM2 0.8ohm Coils for better MTL flavor.



Features:
1. Zinc-Alloy Chassis construction, skin-friendly liquid silicone
2. Integrated 1200mAh rechargeable battery
3. 5-40W adjustable power
4. 2ml PnP MTL Pod, magnet pod installation
5. Intuitive firing button, two adjustment buttons
6. 0.54 inch OLED Screen, Auto/Manual mode
7. Bottom fill system, press fit coil installation
8. Compatible with all VOOPOO PnP Coil Series
9. IP66 Protection: Water/Dust/Shock proof
...

Click here for more:

Voopoo Seal Kit: Voopoo Seal Pod System Kit 1200mAh 2ml

I can't seem to find the answer anywhere. Sorry if for some reason there is an answer to this question here somewhere on the forums, but I swear I looked for it and came up with nothing. So, can anyone help me? I need to remove my drip tip. How do I do it?

Dear Vape Friends,

Hope you are doing well!

As we all know that Voopoo has just released a professional edition of Drag X Plus – Drag X Plus Pro, which comes with the new TPP 2.0 pod tank. If you wanna text it for free, here is the chance. We are going to giveaway Voopoo Drag X Plus Pro with 3 winners in total. Ends on 25th July. Take the chance to join and win!

*Color will be shipped out randomly if you are lucky to win!

About Voopoo Drag X Plus Pro Kit
Voopoo Drag X Plus Pro Kit consists of Voopoo Drag X Plus Professional Edition mod and new TPP 2.0 Pod Tank, compatible with all TPP series coils. Voopoo Drag X Plus Professional Edition is powered by single 18650/ 21700 battery with adjustable wattage of 5-100W output. Drag X Plus Professional Edition mod features New GENE FAN 2.0 chip and can show vaping information by 0.96 inch TFT screen. And Drag X Plus Professional Edition supports VW, Smart, RBA modes to meet different needs and matches other tanks by 510 connection.Voopoo Drag X Plus Professional Edition Kit is constructed of Zinc & Leather & PCTG with stylish and comfortable hand feeling. The TPP 2.0 Pod Tank Atomizer holds 5.5ml capacity and compatible with All TPP Coils.



Join & Win
Finish the tasks below and win Voopoo Drag X Plus Pro Kit home easily. Good luck to you all!!

Please click here to join: HealthCabin Giveaway or Voopoo Drag X Plus Pro Giveaway | HealthCabin