Threads
-
Locked
Voopoo Argus Pro VS Voopoo Drag X. What's the Difference???
- By Justin_ting
- AVE40
- 0 Replies
No matter which device you have picked, Voopoo Argus Pro or Voopoo Drag X, you can use Voopoo's accessories at will.
Similarities:
Material: Zinc Alloy + Leather(Battery Mod)/ PCTG(Pod Cartridge)
Output Range: 5w-80w
Chipset Type: GENE.TT chipset
Liquid Capacity: 4.5ml(PnP Pod)
Pod Compatibility: All PnP Pod Tank(PnP Pod, PnP MTL Pod, PnP RTA Pod)
Coil Compatibility: All PnP Coils(PnP-VM, PnP-TM, PnP-R...)
Airflow Control: Infinite Airflow Control System
Differences:
Size: Drag X - 95mm * 32.5mm * 28mm/ Argus Pro - 124mm * 35mm * 31mm
Battery Type: Drag X - Single 18650 external battery/ Argus Pro - 3000mAh internal battery
Firing Mechanism: Drag X - Button Activated/ Argus Pro - Button Activated & Auto Draw
Please click here to check the full review: What's the Difference Between Voopoo Drag X and Voopoo Argus Pro?
We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40
Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email to info@ave40.com first
-
Locked
GAS MODS Kree 24 RTA - Review
- By Tim Wiseman
- Atomizer Reviews
- 3 Replies
Hi ECF members, In this review i take a look at the Kree 24 RTA from Gas Mods. The GAS MODS Kree 24 RTA was supplied for the purpose of this review by Ella from Sourcemore.
GAS MODS Kree 24 RTA 5.5ml DL rebuildable tank atomizer
Introduction
I have been aware of Gas Mods for a couple of years and if my memory serves me correctly looking at their first couple of products they seemed a bit pricey and i saw them as a wannabe high end manufacturer. Then there seemed to be a U-turn with the original Kree which saw an RTA more at the price point we would expect from Oumier while still maintaining a high build quality.
The Kree 24 is the first Gas Mods product i have used and from looking at all the available information starts where the Kree 22mm (original) left off. The Kree 24 is a 24mm in diameter RTA which offers a single build deck and fixed dual airflow slots. We then have inserts offering from a restricted direct lung draw up to full on DL with little in the way of restriction. The RTA comes with a larger spare 5.5ml PMMA (Glass with Silver version) tube and a clever extension tube which can also be used as a 510 drip-tip. With it's eye catching appearance and super easy build deck let's check out the Kree 24!
___________________________________________________________________
In The Box
Contents:
1 x Kree 24 RTA 3.5ml (2ml TPD)
1 x 5.5ml PMMA Tube (Glass Silver version)
1 x 510 Adaptor
1 x 5.5ml extension/510 drip tip
4 x Airflow Inserts
1 x Screw Driver & O-rings Bag
___________________________________________________________________
Aesthetics
The Kree 24 came in cardboard box packaging with everything neatly presented in their own compartments on one layer. I received the Black version which has a tinted PMMA tube and matching proprietary drip tip which has an 810 feel and decent size bore. The options are Silver, Black and Grey, The Grey also has a tinted PMMA tube and Grey chamber with Gold plated deck while the Silver version comes with Glass tubes, Silver chamber and Stainless deck.
The RTA has a very transparent look with a base section that see's heavy machined knurling and dual fixed airflow slots. Through the tube we can see the chamber which has "KREE" carved into it and a section of the outer deck showing below the chamber with wicking channels forming a metallic ring that breaks the colour up, i must say the Gold metallic ring of the deck between the main Black colour looks particularly nice on the Black version i received.
Moving to the base we have a protruding Gold plated positive pin and branding. I must say for it's price point it's extremely well made, nice looking, and very well presented!
___________________________________________________________________
Kree 24 Specs and Features:
Size: 24 x 40mm
Material: Stainless steel + glass + PC
4 Airflow Inserts ID: 4.5mm, 4.0mm, 3.5mm, 3.0mm
Deck: Single Coil Deck
Capacity: 3.5ml
Drip Tip: 810
810 drip tip with 510 adapter
Top-fill
Thread: 510
Colours: Silver, Black, Grey
___________________________________________________________________
What You Receive
As well as the Kree 24 RTA 3.5ml (2ml TPD) you also get a very good quality 510 adaptor, 5.5ml tube and useless Blue screwdriver to add to the collection. We have the usual paperwork and then a bag of spare O-rings, post screws and a spare positive pin. Also in the spares bag is where you will find the clever extension piece which doubles up as a 510 drip tip and the set of 4 Gold plated airflow inserts. Unfortunately you receive no coils or cotton which for me is a big con as i believe any rebuildable should come with everything you need to do at least one build!
___________________________________________________________________
It's Various Parts
Starting up top we have a proprietary drip tip which screws on to the chimney while also securing to the PMMA tube with an O-ring to keep the tank sealed. The tube just gets fitted over the base section where it both gets secured and sealed by an O-ring positioned on the base section. Going back to the drip tip and instead of using the pre-installed proprietary 810 style you can attach the 510 adaptor which again screws to the chimney and seals with an O-ring but also has a protruding section that has knurling which matches the knurling on the base section.
We then have the chamber with short chimney, the chamber has quite a low flattish ceiling making it a very reduced chamber especially for a DL tank. The base section with deck has the already mentioned outer knurling and fixed dual airflow slots. The deck is a two post single coil affair with large wicking channels and a 5mm airflow outlet directly underneath where the centre of the coil will be positioned, or you can screw in one of the supplied inserts! When the tank goes together the chamber with chimney section both screws onto the deck and to the drip tip securing the tank together!
___________________________________________________________________
Extending The Kree 24
The Kree 24 comes as either a 3.5ml standard or 2ml TPD RTA but you receive a 5.5ml tube and chimney extension. The first specs i saw for this had listed a 510 adaptor and 510 drip tip and indeed i tried out the combo and it fit's fine via the sealing O-ring and although i am not finding it mentioned anywhere else it's also shaped correctly and fit for purpose. I did though wonder how does having a taller tube work but then noticed threading both on the base of the 510 drip tip and within it's internal bore then realised it's main job is the extension for the chimney.
This does mean if you wish to also use the 510 adaptor when the tank is extended you will need to use an alternative drip tip as the one supplied is moonlighting, or was it moonlighting as a drip tip? or is it even meant to be a drip tip at all but just happens to work well as one? anyway you get the picture!
So quite simple instead of fitting the pre-installed tube you use the 5.5ml tube but screw on the chimney extension allowing the pre-installed drip-tip or 510 drip tip adaptor to be installed as usual!
___________________________________________________________________
The Airflow
We have large fixed dual airflow slots at the base and then any restriction is controlled by screwing in place one of the 4 airflow inserts. Airflow inserts is something more common to MTL tanks and some also maintain an adjustment ring for fine tuning which i find is possibly needed even more with a DL tank with just 4 inserts but we will see!
We have an airflow outlet directly underneath where your coil will be positioned which is 5mm in diameter or you can screw in place one of the inserts to restrict as you prefer, they are 4.5mm, 4.0mm, 3.5mm and finally 3.0mm for the most restrictive draw.
There is not the space between the posts to be able to screw the inserts in position by hand and also you need quite a large flathead screwdriver so forget your vaping tool box and head for your proper tools that keeps the wife more happy (no not those sought of tools), it does seem a pain to be honest and forget changing these inserts on the fly, no chance!
___________________________________________________________________
The Deck And Build
I have already explained the airflow inserts and if you are going to install one you need to do this first before starting your build. The deck has two posts facing each other with screws which have very large heads which themselves act as clamps as they trap the leads when tightened. The screws do have flatheads which are my least favourite but much less of an issue to me when they are this large.
Either side of each screw head we have a raised lip so your coil leads don't pop out while fixing in place and while you do need your leads going in opposite directions it doesn't matter which way they have been wound.
Just loosen the screws and slide your leads under the screw heads and then while holding the coil the best you can over the airflow outlet fasten the screws down. Now you can use a coiling rod or fit for purpose tool to position the coil better if needed and then snip your access lead ends. Finally pulse your coil giving it a few strums to get rid of any hotspots then it's time to add your wicking.
This is such an easy build but you do need to snip your leads almost flush with the posts else it will be a shorting candidate so you might need to force any remaining access lead upwards by pressing them inwards if you can't snip close enough!
The Kree 24 has large wicking channels for a single coil RTA so i would suggest filling those channels with cotton so you don't get the deck flooding so cut your cotton ends a little longer than you would normally then just fill the channels without pressing the cotton down so it's too densely packed suffocating the flow!
Finally i would just screw the chamber on to the deck and fire to check you have no shorts before putting the tank together and filling.
___________________________________________________________________
Filling
The Kree 24 is top-fill so you need to either unscrew the pre-installed drip-tip or 510 adaptor depending which one you have installed and then just fill making sure you avoid squirting any liquid down the chimney opening. Once filled simply screw back in place the drip tip or adaptor!
___________________________________________________________________
How It Vapes? And Thoughts!
Firstly i do like the transparent aesthetic look of the RTA and also that it can be extended to hold 5.5ml which for a single coil RTA is a really good capacity. I possibly would of ended up using the 510 adaptor anyway preferring a more restrictive draw but it was forced on me as i just found the pre-installed proprietary drip-tip was just too slippy to get a proper grip giving me problems when i tried to undo it to fill!
I do like the way the chimney extension piece can also be used as a 510 but not sure if that's intentional or just coincidence it both has a 510 drip tip shape and also fits well, i have my doubts as it doesn't fit other 510 fitting tanks just the adaptor on the Kree 24, personally though preferring a nipple style i fitted one of my own.
I really do like the idea of using inserts directly underneath the coil even with a DL RTA but would much prefer being able to swap them out on the fly and also have the slots adjustable for fine tuning. As it is it can take a few builds trying different inserts until you find how you prefer the RTA which a better design could of avoided.
The draw on the Kree 24 goes from little in the way of any restriction with no insert down to a restricted direct lung with the 3.0mm insert. The 3.5mm insert gives a medium restricted lung draw, the 4mm a semi restrictive draw and the 4.5ml more in the way of full on DL but just with a touch more restriction than using no insert at all.
You can get tanks with super smooth airflow and some that give turbulence, also tanks that are very quiet and some which are loud and the Kree 24 sits on the fence having slight turbulence and while not excessively loud certainly isn't a quiet tank!
I have been doing builds with 3.0ID fused claptons that have worked well, you could go 3.5ID but no bigger. The Kree 24 is a mixed bag but when it comes to the most important thing to most it excels and that's flavour, i have been getting excellent flavour but a bit of a labour of love with this one which some will see worth it while others will rather give it a miss! It's a pet hate when a rebuildable comes without cotton and coils as i believe any rebuildable should come with everything you need to do at least one build so that's my final con! Finally one of the biggest pros is it's price which i rarely mention but this is so reasonably priced it might well be worth a punt to many!
___________________________________________________________________
Likes
Aesthetically nice looking (subjective)
Nice build quality
Very nicely presented
5.5ml capacity with included taller tube
Chimney extension
Extension can be used with the Kree 24 as a 510 drip tip
Very nice 510 drip tip adaptor included
Airflow Inserts included
Restricted direct lung through to full on DL draws
Very easy to build
Can be filled quickly (top-fill)
I have been getting excellent flavour
Very reasonably priced
Cons
Inserts can't be swapped on the fly
Found the pre-installed drip tip has a slippy surface making it difficult to unscrew for filling
Airflow slots non adjustable
Slightly turbulent
Slightly loud
Comes with no coils or cotton
I would once again like to thank Ella from Sourcemore for supplying the GAS MODS Kree 24 RTA for the purpose of this review, thanks for reading and stay safe!
GAS MODS Kree 24 RTA 5.5ml DL rebuildable tank atomizer
$17.99 GAS MODS Kree 24 RTA
code: KREE
Disclaimer: I am not affiliated with Sourcemore or benefit in any way from the use of the above code but was asked if i would include it in my content!
___________________________________________________________________
GAS MODS Kree 24 RTA 5.5ml DL rebuildable tank atomizer
Introduction
I have been aware of Gas Mods for a couple of years and if my memory serves me correctly looking at their first couple of products they seemed a bit pricey and i saw them as a wannabe high end manufacturer. Then there seemed to be a U-turn with the original Kree which saw an RTA more at the price point we would expect from Oumier while still maintaining a high build quality.
The Kree 24 is the first Gas Mods product i have used and from looking at all the available information starts where the Kree 22mm (original) left off. The Kree 24 is a 24mm in diameter RTA which offers a single build deck and fixed dual airflow slots. We then have inserts offering from a restricted direct lung draw up to full on DL with little in the way of restriction. The RTA comes with a larger spare 5.5ml PMMA (Glass with Silver version) tube and a clever extension tube which can also be used as a 510 drip-tip. With it's eye catching appearance and super easy build deck let's check out the Kree 24!
___________________________________________________________________
In The Box
Contents:
1 x Kree 24 RTA 3.5ml (2ml TPD)
1 x 5.5ml PMMA Tube (Glass Silver version)
1 x 510 Adaptor
1 x 5.5ml extension/510 drip tip
4 x Airflow Inserts
1 x Screw Driver & O-rings Bag
___________________________________________________________________
Aesthetics
The Kree 24 came in cardboard box packaging with everything neatly presented in their own compartments on one layer. I received the Black version which has a tinted PMMA tube and matching proprietary drip tip which has an 810 feel and decent size bore. The options are Silver, Black and Grey, The Grey also has a tinted PMMA tube and Grey chamber with Gold plated deck while the Silver version comes with Glass tubes, Silver chamber and Stainless deck.
The RTA has a very transparent look with a base section that see's heavy machined knurling and dual fixed airflow slots. Through the tube we can see the chamber which has "KREE" carved into it and a section of the outer deck showing below the chamber with wicking channels forming a metallic ring that breaks the colour up, i must say the Gold metallic ring of the deck between the main Black colour looks particularly nice on the Black version i received.
Moving to the base we have a protruding Gold plated positive pin and branding. I must say for it's price point it's extremely well made, nice looking, and very well presented!
___________________________________________________________________
Kree 24 Specs and Features:
Size: 24 x 40mm
Material: Stainless steel + glass + PC
4 Airflow Inserts ID: 4.5mm, 4.0mm, 3.5mm, 3.0mm
Deck: Single Coil Deck
Capacity: 3.5ml
Drip Tip: 810
810 drip tip with 510 adapter
Top-fill
Thread: 510
Colours: Silver, Black, Grey
___________________________________________________________________
What You Receive
As well as the Kree 24 RTA 3.5ml (2ml TPD) you also get a very good quality 510 adaptor, 5.5ml tube and useless Blue screwdriver to add to the collection. We have the usual paperwork and then a bag of spare O-rings, post screws and a spare positive pin. Also in the spares bag is where you will find the clever extension piece which doubles up as a 510 drip tip and the set of 4 Gold plated airflow inserts. Unfortunately you receive no coils or cotton which for me is a big con as i believe any rebuildable should come with everything you need to do at least one build!
___________________________________________________________________
It's Various Parts
Starting up top we have a proprietary drip tip which screws on to the chimney while also securing to the PMMA tube with an O-ring to keep the tank sealed. The tube just gets fitted over the base section where it both gets secured and sealed by an O-ring positioned on the base section. Going back to the drip tip and instead of using the pre-installed proprietary 810 style you can attach the 510 adaptor which again screws to the chimney and seals with an O-ring but also has a protruding section that has knurling which matches the knurling on the base section.
We then have the chamber with short chimney, the chamber has quite a low flattish ceiling making it a very reduced chamber especially for a DL tank. The base section with deck has the already mentioned outer knurling and fixed dual airflow slots. The deck is a two post single coil affair with large wicking channels and a 5mm airflow outlet directly underneath where the centre of the coil will be positioned, or you can screw in one of the supplied inserts! When the tank goes together the chamber with chimney section both screws onto the deck and to the drip tip securing the tank together!
___________________________________________________________________
Extending The Kree 24
The Kree 24 comes as either a 3.5ml standard or 2ml TPD RTA but you receive a 5.5ml tube and chimney extension. The first specs i saw for this had listed a 510 adaptor and 510 drip tip and indeed i tried out the combo and it fit's fine via the sealing O-ring and although i am not finding it mentioned anywhere else it's also shaped correctly and fit for purpose. I did though wonder how does having a taller tube work but then noticed threading both on the base of the 510 drip tip and within it's internal bore then realised it's main job is the extension for the chimney.
This does mean if you wish to also use the 510 adaptor when the tank is extended you will need to use an alternative drip tip as the one supplied is moonlighting, or was it moonlighting as a drip tip? or is it even meant to be a drip tip at all but just happens to work well as one? anyway you get the picture!
So quite simple instead of fitting the pre-installed tube you use the 5.5ml tube but screw on the chimney extension allowing the pre-installed drip-tip or 510 drip tip adaptor to be installed as usual!
___________________________________________________________________
The Airflow
We have large fixed dual airflow slots at the base and then any restriction is controlled by screwing in place one of the 4 airflow inserts. Airflow inserts is something more common to MTL tanks and some also maintain an adjustment ring for fine tuning which i find is possibly needed even more with a DL tank with just 4 inserts but we will see!
We have an airflow outlet directly underneath where your coil will be positioned which is 5mm in diameter or you can screw in place one of the inserts to restrict as you prefer, they are 4.5mm, 4.0mm, 3.5mm and finally 3.0mm for the most restrictive draw.
There is not the space between the posts to be able to screw the inserts in position by hand and also you need quite a large flathead screwdriver so forget your vaping tool box and head for your proper tools that keeps the wife more happy (no not those sought of tools), it does seem a pain to be honest and forget changing these inserts on the fly, no chance!
___________________________________________________________________
The Deck And Build
I have already explained the airflow inserts and if you are going to install one you need to do this first before starting your build. The deck has two posts facing each other with screws which have very large heads which themselves act as clamps as they trap the leads when tightened. The screws do have flatheads which are my least favourite but much less of an issue to me when they are this large.
Either side of each screw head we have a raised lip so your coil leads don't pop out while fixing in place and while you do need your leads going in opposite directions it doesn't matter which way they have been wound.
Just loosen the screws and slide your leads under the screw heads and then while holding the coil the best you can over the airflow outlet fasten the screws down. Now you can use a coiling rod or fit for purpose tool to position the coil better if needed and then snip your access lead ends. Finally pulse your coil giving it a few strums to get rid of any hotspots then it's time to add your wicking.
This is such an easy build but you do need to snip your leads almost flush with the posts else it will be a shorting candidate so you might need to force any remaining access lead upwards by pressing them inwards if you can't snip close enough!
The Kree 24 has large wicking channels for a single coil RTA so i would suggest filling those channels with cotton so you don't get the deck flooding so cut your cotton ends a little longer than you would normally then just fill the channels without pressing the cotton down so it's too densely packed suffocating the flow!
Finally i would just screw the chamber on to the deck and fire to check you have no shorts before putting the tank together and filling.
___________________________________________________________________
Filling
The Kree 24 is top-fill so you need to either unscrew the pre-installed drip-tip or 510 adaptor depending which one you have installed and then just fill making sure you avoid squirting any liquid down the chimney opening. Once filled simply screw back in place the drip tip or adaptor!
___________________________________________________________________
How It Vapes? And Thoughts!
Firstly i do like the transparent aesthetic look of the RTA and also that it can be extended to hold 5.5ml which for a single coil RTA is a really good capacity. I possibly would of ended up using the 510 adaptor anyway preferring a more restrictive draw but it was forced on me as i just found the pre-installed proprietary drip-tip was just too slippy to get a proper grip giving me problems when i tried to undo it to fill!
I do like the way the chimney extension piece can also be used as a 510 but not sure if that's intentional or just coincidence it both has a 510 drip tip shape and also fits well, i have my doubts as it doesn't fit other 510 fitting tanks just the adaptor on the Kree 24, personally though preferring a nipple style i fitted one of my own.
I really do like the idea of using inserts directly underneath the coil even with a DL RTA but would much prefer being able to swap them out on the fly and also have the slots adjustable for fine tuning. As it is it can take a few builds trying different inserts until you find how you prefer the RTA which a better design could of avoided.
The draw on the Kree 24 goes from little in the way of any restriction with no insert down to a restricted direct lung with the 3.0mm insert. The 3.5mm insert gives a medium restricted lung draw, the 4mm a semi restrictive draw and the 4.5ml more in the way of full on DL but just with a touch more restriction than using no insert at all.
You can get tanks with super smooth airflow and some that give turbulence, also tanks that are very quiet and some which are loud and the Kree 24 sits on the fence having slight turbulence and while not excessively loud certainly isn't a quiet tank!
I have been doing builds with 3.0ID fused claptons that have worked well, you could go 3.5ID but no bigger. The Kree 24 is a mixed bag but when it comes to the most important thing to most it excels and that's flavour, i have been getting excellent flavour but a bit of a labour of love with this one which some will see worth it while others will rather give it a miss! It's a pet hate when a rebuildable comes without cotton and coils as i believe any rebuildable should come with everything you need to do at least one build so that's my final con! Finally one of the biggest pros is it's price which i rarely mention but this is so reasonably priced it might well be worth a punt to many!
___________________________________________________________________
Likes
Aesthetically nice looking (subjective)
Nice build quality
Very nicely presented
5.5ml capacity with included taller tube
Chimney extension
Extension can be used with the Kree 24 as a 510 drip tip
Very nice 510 drip tip adaptor included
Airflow Inserts included
Restricted direct lung through to full on DL draws
Very easy to build
Can be filled quickly (top-fill)
I have been getting excellent flavour
Very reasonably priced
Cons
Inserts can't be swapped on the fly
Found the pre-installed drip tip has a slippy surface making it difficult to unscrew for filling
Airflow slots non adjustable
Slightly turbulent
Slightly loud
Comes with no coils or cotton
I would once again like to thank Ella from Sourcemore for supplying the GAS MODS Kree 24 RTA for the purpose of this review, thanks for reading and stay safe!
GAS MODS Kree 24 RTA 5.5ml DL rebuildable tank atomizer
$17.99 GAS MODS Kree 24 RTA
code: KREE
Disclaimer: I am not affiliated with Sourcemore or benefit in any way from the use of the above code but was asked if i would include it in my content!
___________________________________________________________________
-
Locked
New Mod From SXK! CinqueTerre 70 Clone
Today to recommend a new mod from SXK! The CinqueTerre 70W Clone Box Mod
The SXK CinqueTerre Style 70W TC VW Vape Box Mod is made from ABS and Stainless Steel. The SXK CinqueTerre Box Mod is built-in SEVO 70 Chipset and supports variable wattage from 5W to 70W. The SXK CinqueTerre is powered by 1 x 18650 battery (not included) and supports replacement battery tube (not included). Compatible with 24mm Vape atomizer.
Click and Go Get one SXK CinqueTerre Style 70W TC VW Variable Wattage Vape Box Mod
The SXK CinqueTerre Style 70W TC VW Vape Box Mod is made from ABS and Stainless Steel. The SXK CinqueTerre Box Mod is built-in SEVO 70 Chipset and supports variable wattage from 5W to 70W. The SXK CinqueTerre is powered by 1 x 18650 battery (not included) and supports replacement battery tube (not included). Compatible with 24mm Vape atomizer.
Click and Go Get one SXK CinqueTerre Style 70W TC VW Variable Wattage Vape Box Mod
-
Locked
20% New eJuice from Naked 100: Tobacco Cuban Blend.
- By Juice Chris
- Ejuice Deals
- 2 Replies
Naked 100 Tobacco Cuban Blend Ejuice
Experience the bold flavor of a classic Cuban cigar with Naked 100 Tobacco Cuban Blend eJuice.
And take 20% off all other ejuices with code TODAY20 at ejuice.deals
Experience the bold flavor of a classic Cuban cigar with Naked 100 Tobacco Cuban Blend eJuice.
And take 20% off all other ejuices with code TODAY20 at ejuice.deals
-
Locked
Augvape Intake Mtl Rta Top Air Flow By Augvape & Mike Vapes.
- By Frenkyou
- Atomizer Reviews
- 3 Replies
Augvape Intake Mtl Rta Top Air Flow By Augvape & Mike Vapes.
The name Intake was introduced on the market for the first time two years ago, the following year the dual-coil version arrived, this year there are two new releases, first the sub-ohm version with prefabricated heads arrived, while now comes the new MTL RTA version, fruit of the umpteenth collaboration with the American youtuber Mike Vapes.
Enjoy the reading
The white cardboard packaging with which the product arrives, shows at the front; the Augvape logo, the name of the modder who collaborated on this project, the name of the vaporizer, the photo of the object.
On the back they are listed; the content, social networks in the form of icons, logos & brands, the address of Shenzhen Augvape Technology Co, Ltd, are also present a QR-Code and a scratch & check.
Package contents:
1 * MTL RTA Atomizer
1 * Bubble Glass
1 * Gasket
8 * O'ring
5 * Air-pin:
4 * Reverse Thread Screws
2 * Coil Kanthal and Ni80 MTL Clapton from 0.8 ± 0.05Ω
1 * User Manual
1 * Warranty Card
Dimensions and features:
Top air flow MTL / DL
Top Refil
Dimensions: 24x54.3mm
Weight: 58gr
Capacity with straight glass: 3.1ml
Capacity with bubble glass: 4.6ml
Deck: single coil
Undercoil air reduction: Ø1, Ø1,2, Ø1,4 Ø1,6, Ø1,8mm
Thread: 510
First impressions:
Having a rebuildable MTL atomizer with AFC on the top anti-leak was one of the combinations I was missing, so I was happy to get this item for review (thank you Augvape).
At first glance, the "Intake" appears quite tall (54.3mm Drip-Tip included) touching it with your hand it seems sturdy and well built, the significant weight of 58gr is certainly due to the construction in thick stainless steel; the equipment is rich, there are several o'ring, four spare screws, four air-pins + one, two pre-assembled resistors and a 4.6ml pyrex "Bubble" tank.
The Drip tip 510 has two sealing o'ring and is built in derlin, the internal hole (4mm) could be suitable for a good shot in restricted flavor.
The top cap has a perimeter texture designed to give a good grip to the fingers. The opening mechanism makes use of two teeth present in the lower part of the top-cap, they coincide with two notches obtained in the upper part of the chimney, therefore for this rapid operation only 1/4 of a turn is needed.
The liquid refill slots are of unusual size for an MTL atomizer, they are giants! This allows you to use any dispencer for refueling.
The AFC ring nut (removable) has two rows of 2x5 holes, these holes have the following measures: 1.0, 1.2, 1.4, 1.6, 1.8mm
In the upper part of the main structure there are two types of air passages, the first pass (MTL) is a single hole of 2.5mm in diameter, it allows you to use a regulation of the AFC with a single hole at a time, the second passage (DL) uses a 2x10mm diameter slot that can allow the simultaneous opening of all the holes on the AFC ring.
The ring is equipped with an end-of-stroke, slides over an 0-ring and allows multiple and quick adjustments.
The Intake MTL inscription engraved on the bell is quite deep and clearly visible.
We have seen the control of the air and its multiple possibilities of partialization, now let's see what turn the air makes ...
The internal part of the bell is quite interesting to observe, its internal diameter is 14mm wide, 9mm deep, has a peek material ceiling with three holes, the chimney has a 4mm hole and is placed in the center.
The air coming from above is channeled through the side holes on the white peek inside the bell (1 and 2), passing through two perforated metal "poles" on the deck (1 and 2) to reach the part underneath the coil , then, the air sent to the coil is partialized by 5 + 1 different combinations, depending on whether one of the five steel air-pins is used (we have seen the measurements).
* The unique center hole (sixth combination) with no air-pin inserted, measures 3.7mm and can be used for a very airy vape.
In the image below (indicated by the arrows) you can see the lock / unlock engravings on the deck, this is to remind you that the screws to tighten the coil legs are in reverse rotation compared to the usual one.
The pin 510 (removable) is quite protruding, gold plated and with peek insulating gasket.
In addition to the name of Mike Vapes and the Augvape brand, engraved on the base are the disposal logo, the serial number and the C E brand.
Building this single-deck is simple, after choosing our air-pin, to install the coil you just need to remember the direction of rotation of the screws.
Once the coil legs are inserted between the screws and the side feet, they are effectively locked, even the cutting operation is easy.
After arranging the coils and running in the coil, we can insert the cotton by adjusting the cut with the outer edge of the base.
The name Intake was introduced on the market for the first time two years ago, the following year the dual-coil version arrived, this year there are two new releases, first the sub-ohm version with prefabricated heads arrived, while now comes the new MTL RTA version, fruit of the umpteenth collaboration with the American youtuber Mike Vapes.
Enjoy the reading
The white cardboard packaging with which the product arrives, shows at the front; the Augvape logo, the name of the modder who collaborated on this project, the name of the vaporizer, the photo of the object.
On the back they are listed; the content, social networks in the form of icons, logos & brands, the address of Shenzhen Augvape Technology Co, Ltd, are also present a QR-Code and a scratch & check.
Package contents:
1 * MTL RTA Atomizer
1 * Bubble Glass
1 * Gasket
8 * O'ring
5 * Air-pin:
4 * Reverse Thread Screws
2 * Coil Kanthal and Ni80 MTL Clapton from 0.8 ± 0.05Ω
1 * User Manual
1 * Warranty Card
Dimensions and features:
Top air flow MTL / DL
Top Refil
Dimensions: 24x54.3mm
Weight: 58gr
Capacity with straight glass: 3.1ml
Capacity with bubble glass: 4.6ml
Deck: single coil
Undercoil air reduction: Ø1, Ø1,2, Ø1,4 Ø1,6, Ø1,8mm
Thread: 510
First impressions:
Having a rebuildable MTL atomizer with AFC on the top anti-leak was one of the combinations I was missing, so I was happy to get this item for review (thank you Augvape).
At first glance, the "Intake" appears quite tall (54.3mm Drip-Tip included) touching it with your hand it seems sturdy and well built, the significant weight of 58gr is certainly due to the construction in thick stainless steel; the equipment is rich, there are several o'ring, four spare screws, four air-pins + one, two pre-assembled resistors and a 4.6ml pyrex "Bubble" tank.
The Drip tip 510 has two sealing o'ring and is built in derlin, the internal hole (4mm) could be suitable for a good shot in restricted flavor.
The top cap has a perimeter texture designed to give a good grip to the fingers. The opening mechanism makes use of two teeth present in the lower part of the top-cap, they coincide with two notches obtained in the upper part of the chimney, therefore for this rapid operation only 1/4 of a turn is needed.
The liquid refill slots are of unusual size for an MTL atomizer, they are giants! This allows you to use any dispencer for refueling.
The AFC ring nut (removable) has two rows of 2x5 holes, these holes have the following measures: 1.0, 1.2, 1.4, 1.6, 1.8mm
In the upper part of the main structure there are two types of air passages, the first pass (MTL) is a single hole of 2.5mm in diameter, it allows you to use a regulation of the AFC with a single hole at a time, the second passage (DL) uses a 2x10mm diameter slot that can allow the simultaneous opening of all the holes on the AFC ring.
The ring is equipped with an end-of-stroke, slides over an 0-ring and allows multiple and quick adjustments.
The Intake MTL inscription engraved on the bell is quite deep and clearly visible.
We have seen the control of the air and its multiple possibilities of partialization, now let's see what turn the air makes ...
The internal part of the bell is quite interesting to observe, its internal diameter is 14mm wide, 9mm deep, has a peek material ceiling with three holes, the chimney has a 4mm hole and is placed in the center.
The air coming from above is channeled through the side holes on the white peek inside the bell (1 and 2), passing through two perforated metal "poles" on the deck (1 and 2) to reach the part underneath the coil , then, the air sent to the coil is partialized by 5 + 1 different combinations, depending on whether one of the five steel air-pins is used (we have seen the measurements).
* The unique center hole (sixth combination) with no air-pin inserted, measures 3.7mm and can be used for a very airy vape.
In the image below (indicated by the arrows) you can see the lock / unlock engravings on the deck, this is to remind you that the screws to tighten the coil legs are in reverse rotation compared to the usual one.
The pin 510 (removable) is quite protruding, gold plated and with peek insulating gasket.
In addition to the name of Mike Vapes and the Augvape brand, engraved on the base are the disposal logo, the serial number and the C E brand.
Building this single-deck is simple, after choosing our air-pin, to install the coil you just need to remember the direction of rotation of the screws.
Once the coil legs are inserted between the screws and the side feet, they are effectively locked, even the cutting operation is easy.
After arranging the coils and running in the coil, we can insert the cotton by adjusting the cut with the outer edge of the base.
-
Locked
NEW... lower price for Tea Time!
- By kevbow
- Tea Time Eliquid
- 1 Replies
For a limited time!!!
We have lowered the price of Tea Time. No discount code necessary! We make some of the best tea inspired e-liquids on the market. Very flavorful and no added sweeteners! If you haven't tried Tea Time yet, NOW is the time!
Tea Time Eliquid Co.
We have lowered the price of Tea Time. No discount code necessary! We make some of the best tea inspired e-liquids on the market. Very flavorful and no added sweeteners! If you haven't tried Tea Time yet, NOW is the time!
Tea Time Eliquid Co.
-
Locked
NEW... lower price for Tea Time!
- By kevbow
- E Cigarette Suppliers Forum
- 1 Replies
For a limited time!!!
We have lowered the price of Tea Time. No discount code necessary! We make some of the best tea inspired e-liquids on the market. Very flavorful and no added sweeteners! If you haven't tried Tea Time yet, NOW is the time!
Tea Time Eliquid Co.
We have lowered the price of Tea Time. No discount code necessary! We make some of the best tea inspired e-liquids on the market. Very flavorful and no added sweeteners! If you haven't tried Tea Time yet, NOW is the time!
Tea Time Eliquid Co.
-
Locked
In Stock: Augvape Flash Kit 18650/20700/21700
- By 3Avape_Dara
- 3AVape
- 0 Replies
Product introduction
Augvape Flash Kit is powered by single 21700 battery, compatible with 20700 and 18650 batteries.It is made of aluminum alloy,comes with intake new innovative mesh coil made of super SS 890L which has more resistance to oxidation and corrosion. It is large and conveniently concave for more comfortable handling. It is surrounded by an LED indicator, which will not only notify about the end of the battery charge, but also show the selected output voltage mode. In total, the developers provide for three of them - 3.5 / 3.7 / 3.9V.
Parameters:
Dimensions: 92.2 x 26mm
Material: aluminum alloy
Battery: Single 18650/20700/21700
Resistance Range: 0.05 - 3.0Ω
Capacity: 3.5 / 5ml
Features:
-Powered by the three most popular standard sizes of external batteries.
-Maximum capabilities are limited to 26mm
-Surrounded by an LED indicator, which will not only notify about the end of the battery charge,
Package includes:
1 x Flash mod
1 x Intake Sub Ohm Tank
1 x replaceable evaporators 2pcs 0.2Ω (one preinstalled)
1 x adapter for battery size 18650
1 x spare Oing
1 x spare glass
1 x user manual
1 x warranty card
Augvape Flash Kit is powered by single 21700 battery, compatible with 20700 and 18650 batteries.It is made of aluminum alloy,comes with intake new innovative mesh coil made of super SS 890L which has more resistance to oxidation and corrosion. It is large and conveniently concave for more comfortable handling. It is surrounded by an LED indicator, which will not only notify about the end of the battery charge, but also show the selected output voltage mode. In total, the developers provide for three of them - 3.5 / 3.7 / 3.9V.
Parameters:
Dimensions: 92.2 x 26mm
Material: aluminum alloy
Battery: Single 18650/20700/21700
Resistance Range: 0.05 - 3.0Ω
Capacity: 3.5 / 5ml
Features:
-Powered by the three most popular standard sizes of external batteries.
-Maximum capabilities are limited to 26mm
-Surrounded by an LED indicator, which will not only notify about the end of the battery charge,
Package includes:
1 x Flash mod
1 x Intake Sub Ohm Tank
1 x replaceable evaporators 2pcs 0.2Ω (one preinstalled)
1 x adapter for battery size 18650
1 x spare Oing
1 x spare glass
1 x user manual
1 x warranty card
-
Locked
In Stock: Think Vape AUXO DNA 250C Box mod
- By 3Avape_Dara
- 3AVape
- 0 Replies
Product introduction
ThinkVape AUXO DNA 250C is the latest creation from ThinkVape.Powered by Dual 18650 batteries (not supplied),from 1 to 200 Watts of power.With Leather material with topstitching,clear and informative screen.It is easy to use for performance-oriented equipment.Exceptional finishes.Power and elegance above all.Think Vape Auxo DNA 250C Mod uses the most advanced DNA 250C chip, this chipset has an incredible range of functions, and with the help of Escribe software, provides a variety of settings and customization options. In addition to the classic steam mode (VW, VV, TC, TCR, Bypass), the chipset also provides many useful functions.It can be charged quickly and safely via USB with a charging current of up to 2A.
Parameters:
Size: 90 x 55 x 29mm
Battery: Dual 18650 Battery (Not Included)
Output Wattage: 1W-200W
Materials: Zinc Alloy + Leather
Chipset:Evolv DNA 250C chipset
Resistance Range:0.08ohm-3.0ohm
Temperature Control Range:200°F-600°F
Charging: 2A, USB charging port
Features:
-Powered by dual 18650 battery with max 200W output
-Combination with USB On-The-Go adapter used as a power bank
-Exceptional finishes
-Easy to use for performance-oriented equipment
-Leather material
-Efficient and Safe Battery Management
-Support VW/VV/TC/TCR/Bypass modes
-Clear and Informative 0.96-inch TFT screen
-Advanced DNA 250C Chipset
-510 Threading Connection
Package includes:
1 x Auxo DNA 250C Box Mod
1 x USB cable
1 x User manual
1 x Warranty certificate
ThinkVape AUXO DNA 250C is the latest creation from ThinkVape.Powered by Dual 18650 batteries (not supplied),from 1 to 200 Watts of power.With Leather material with topstitching,clear and informative screen.It is easy to use for performance-oriented equipment.Exceptional finishes.Power and elegance above all.Think Vape Auxo DNA 250C Mod uses the most advanced DNA 250C chip, this chipset has an incredible range of functions, and with the help of Escribe software, provides a variety of settings and customization options. In addition to the classic steam mode (VW, VV, TC, TCR, Bypass), the chipset also provides many useful functions.It can be charged quickly and safely via USB with a charging current of up to 2A.
Parameters:
Size: 90 x 55 x 29mm
Battery: Dual 18650 Battery (Not Included)
Output Wattage: 1W-200W
Materials: Zinc Alloy + Leather
Chipset:Evolv DNA 250C chipset
Resistance Range:0.08ohm-3.0ohm
Temperature Control Range:200°F-600°F
Charging: 2A, USB charging port
Features:
-Powered by dual 18650 battery with max 200W output
-Combination with USB On-The-Go adapter used as a power bank
-Exceptional finishes
-Easy to use for performance-oriented equipment
-Leather material
-Efficient and Safe Battery Management
-Support VW/VV/TC/TCR/Bypass modes
-Clear and Informative 0.96-inch TFT screen
-Advanced DNA 250C Chipset
-510 Threading Connection
Package includes:
1 x Auxo DNA 250C Box Mod
1 x USB cable
1 x User manual
1 x Warranty certificate
-
Locked
We Vape consumer group T shirt competition
- By Mark Oates
- General Vaping Discussion
- 6 Replies
Hi Vapers,
As some of you know I have started a consumer campaign group called We Vape to spread the word about the importance of vaping in the UK. I am a Vaper and Snus user myself and the aim is to make sure vapers get heard during the upcoming consultation on vaping. It would be great to have your support and i've designed a T Shirt and had them printed. So I am going to give away some to 10 lucky people that sign up to We Vape on the get involved page on the website, which I am not allowed to link to but if you search google for you will find it.
Signing up is really important so I can keep people informed about what is happening and how they can help out by responding to consultations and contacting their MP. It will also give me more impact with the media with more members so I can get our voice heard.
Here is the T shirt:
As some of you know I have started a consumer campaign group called We Vape to spread the word about the importance of vaping in the UK. I am a Vaper and Snus user myself and the aim is to make sure vapers get heard during the upcoming consultation on vaping. It would be great to have your support and i've designed a T Shirt and had them printed. So I am going to give away some to 10 lucky people that sign up to We Vape on the get involved page on the website, which I am not allowed to link to but if you search google for you will find it.
Signing up is really important so I can keep people informed about what is happening and how they can help out by responding to consultations and contacting their MP. It will also give me more impact with the media with more members so I can get our voice heard.
Here is the T shirt:
-
Locked
Think Vape Auxo DNA250C Box Mod 200W!
- By AndyColins
- Efun.Top
- 0 Replies
Think Vape Auxo DNA250C Box Mod 200W!
Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top
Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top
-
Locked
Is Drip Stix Disposable Vape Better Than Ryse Bar?
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. This time let's check out another cheap disposable vape named Drip Stix. Don't miss out on it if you like, here we go!
Drip Stix Disposable Vape features 6.5ml of salt nic e-liquid, 2000 Puffs, and comes pre-packaged as a disposable unit. Providing users an enjoyable vape with zero upkeep, and is a simple trip to the trash once the device has been used up. Each Drip Stix Disposable Vape features an estimated 2000 puffs and has an internal 900mAh battery which is to be disposed of once the life cycle ends. The Drip Stix Disposable Vape accommodates 6.5ml of Salt Nicotine E-Liquid with a nicotine level of 50mg. Each Drip Stix features one (1) device per package and has a smooth mouth to lung draw along with an adjustable airflow control located at the base. Integrating all of these features allows users a long-lasting, hassle-free vaping experience. Available in 10 amazing flavors!
Parameters
Internal Battery:900mAh
E-liquid Capacity:6.5ml Salt Nic (Pre-Filled)
Salt Nicotine Conetent:5%, (50MG)
Puffs: Up to 2000+ Puffs per disposable
Flavors: Peach Ice, Grape Ice, Strawberry Ice, Lychee Ice, Lush Ice, Banana Ice, Mint, Orange Soda, Mango Ice, Cola Ice
You may also like:
lio disposable vape
kingfish vape
Drip Stix Disposable Vape features 6.5ml of salt nic e-liquid, 2000 Puffs, and comes pre-packaged as a disposable unit. Providing users an enjoyable vape with zero upkeep, and is a simple trip to the trash once the device has been used up. Each Drip Stix Disposable Vape features an estimated 2000 puffs and has an internal 900mAh battery which is to be disposed of once the life cycle ends. The Drip Stix Disposable Vape accommodates 6.5ml of Salt Nicotine E-Liquid with a nicotine level of 50mg. Each Drip Stix features one (1) device per package and has a smooth mouth to lung draw along with an adjustable airflow control located at the base. Integrating all of these features allows users a long-lasting, hassle-free vaping experience. Available in 10 amazing flavors!
Parameters
Internal Battery:900mAh
E-liquid Capacity:6.5ml Salt Nic (Pre-Filled)
Salt Nicotine Conetent:5%, (50MG)
Puffs: Up to 2000+ Puffs per disposable
Flavors: Peach Ice, Grape Ice, Strawberry Ice, Lychee Ice, Lush Ice, Banana Ice, Mint, Orange Soda, Mango Ice, Cola Ice
You may also like:
lio disposable vape
kingfish vape
-
Locked
Sourcemore 11.11 Carnival, 6 Rounds Flash Sale from $0.01 on Nov. 11th
- By Ema
- Sourcemore
- 0 Replies
6 Rounds Flash Sale from $0.01 on Nov. 11th
Flash Time（Beijing Time):
11.11 16:00:00 - 11.12 15:00:00
11.11 17:00:00 - 11.12 16:00:00
11.11 18:00:00 - 11.12 17:00:00
11.11 20:00:00 - 11.12 19:00:00
11.11 22:00:00 - 11.12 21:00:00
11.12 00:00:00 - 11.12 23:00:00
10% OFF SITEWIDE Coupon: 1111 (clearance and weekly deal items excluded)
5% OFF Bronze Level Coupon: 1111B (must log in, clearance, and special discounted items excluded)
Sourcemore 11.11 Carnival, 6 Rounds Flash Sale from $0.01 on Nov. 11th
Enter here<<<Sourcemore 2020 11.11 Carnival
-
Locked
OBS SKYE Pod Kit - Better Vaping with Fingerprint Function
Today, we will introduce a pod mod kit from OBS. It got some famous Cube series, so how about this new SKYE kit?
For OBS SKYE, MTL&RDL optional vaping styles could meet both flavor and clouds demands. And there a 2 version of it, one is the normal pod kit, and another one come with Fingerprint Function, which can enable you save 6 groups fingerprints.
Main Features:
1. Side-filling cartridge, with transparent window to observe the liquid level
2. OM SK 1.0Ω Coil for MTL/OM YE 0.4Ω Coil(Mesh) for RDL
3. 1600mAh built-in battery, output power 5-40W
4. Advanced fingerprint recognition technology for privacy protection (only for FP version)
Learn More: (remember login first to check better price)
OBS SKYE Pod
OBS SKYE FP Pod
ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall Now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail.
And for any inquires of vape wholesale, feel free to contact Elegomall: elegomall@business.com
For OBS SKYE, MTL&RDL optional vaping styles could meet both flavor and clouds demands. And there a 2 version of it, one is the normal pod kit, and another one come with Fingerprint Function, which can enable you save 6 groups fingerprints.
Main Features:
1. Side-filling cartridge, with transparent window to observe the liquid level
2. OM SK 1.0Ω Coil for MTL/OM YE 0.4Ω Coil(Mesh) for RDL
3. 1600mAh built-in battery, output power 5-40W
4. Advanced fingerprint recognition technology for privacy protection (only for FP version)
Learn More: (remember login first to check better price)
OBS SKYE Pod
OBS SKYE FP Pod
ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall Now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail.
And for any inquires of vape wholesale, feel free to contact Elegomall: elegomall@business.com
-
Locked
New Released! Vandy Vape Gaur-21 Dual 21700 Mod
Brand: Vandy Vape
Product Name: Vandy Vape Gaur-21 Mod
Type: Mod
Introduction
Vandy Vape Gaur-21 Mod is the lightest dual 21700 Box mod, only 128.17g. Holding PCBA waterproof, you can easy to remove E-Juice stain and dust. It is powered by an upgraded Vandy chip with max power 200W output and adopts the Find My Device On APP function.
Parameters of Vandy Vape Gaur-21 Mod
Size: 96.5*30*58.8mm
Operating Voltage: 6.4V-8.4V
Output Voltage: 0.5V-8.0V
Power: 5-200W
Battery: Dual 21700
Charge Port: Type-C
Features of Vandy Vape Gaur-21 Mod
➤PCBA WATERPROOF
➤Find My Device On APP
➤The lightest Dual 21700 Box Mod
Click Vandy Vape Gaur-21 Mod for more details>>>
or visit Recommend for more discounts
note: must log in for the discount
Product Name: Vandy Vape Gaur-21 Mod
Type: Mod
Introduction
Vandy Vape Gaur-21 Mod is the lightest dual 21700 Box mod, only 128.17g. Holding PCBA waterproof, you can easy to remove E-Juice stain and dust. It is powered by an upgraded Vandy chip with max power 200W output and adopts the Find My Device On APP function.
Parameters of Vandy Vape Gaur-21 Mod
Size: 96.5*30*58.8mm
Operating Voltage: 6.4V-8.4V
Output Voltage: 0.5V-8.0V
Power: 5-200W
Battery: Dual 21700
Charge Port: Type-C
Features of Vandy Vape Gaur-21 Mod
➤PCBA WATERPROOF
➤Find My Device On APP
➤The lightest Dual 21700 Box Mod
Click Vandy Vape Gaur-21 Mod for more details>>>
or visit Recommend for more discounts
note: must log in for the discount
-
Locked
Uwell Crown 5 Sub Ohm tank review - for a more restricted vape
- By Verashu
- Vapesourcing
- 0 Replies
The Uwell Crown 5 Sub Ohm tank made of SS and Pyrex glass is an upgraded version of the Crown 4 tank. Uwell Crown 5 Tank has patented self-cleaning technology and Uwell's exclusive Pro-FOCS flavor testing technology.
Parameters:
Size: 29* 50.5mm(Standard Version)/ 29* 51mm(CRC Version)
Material: SS & Pyrex Glass
Capacity: 5ml
Resistance: Fecral UN2 0.23ohm single mesh coil(65-70W, smoothest DTL)
Fecral UN2-2 0.3ohm dual mesh coil(50-55W, restricted DTL)
Fecral UN2-3 0.2ohm triple mesh coil(65-70W, slightly tight DTL)
Thread: 510
The Uwell Crown V vape tank has a capacity of 5ml and a Fecral UN2 mesh coil, which has an excellent flavor. Uwell Crown 5 uses a quarter turn top cover to supplement the e-juice. The filling hole is equipped with a silicone check valve to avoid leakage.
Related products you may like:
innokin kroma z kit for sale
smok nfix mate kit for sale
Parameters:
Size: 29* 50.5mm(Standard Version)/ 29* 51mm(CRC Version)
Material: SS & Pyrex Glass
Capacity: 5ml
Resistance: Fecral UN2 0.23ohm single mesh coil(65-70W, smoothest DTL)
Fecral UN2-2 0.3ohm dual mesh coil(50-55W, restricted DTL)
Fecral UN2-3 0.2ohm triple mesh coil(65-70W, slightly tight DTL)
Thread: 510
The Uwell Crown V vape tank has a capacity of 5ml and a Fecral UN2 mesh coil, which has an excellent flavor. Uwell Crown 5 uses a quarter turn top cover to supplement the e-juice. The filling hole is equipped with a silicone check valve to avoid leakage.
Related products you may like:
innokin kroma z kit for sale
smok nfix mate kit for sale
-
Locked
The Yocan UNI S Keeps Vaping Nice And Simple
- By Yocan_Jimmy
- Yocan
- 0 Replies
The UNI S is the latest upgrade to the very popular original Yocan UNI. It is a vaporizer mod device designed for vaping cartridges.
The Yocan UNI S comes with zinc alloy body that make it very light and a pleasure to hold. The atomizer adjustment dial is now much larger and more visible. And the fire button of Yocan UNI S is rectangular octagon. The LED lights are at the bottom of the front panel.
Main Features:
Metallic body
USB-C Charging
Preset Temperatures
Adjustable atomizer height
Lanyard Hole
Learn more Yocan UNI S features, please visit our official site.
The Yocan UNI S comes with zinc alloy body that make it very light and a pleasure to hold. The atomizer adjustment dial is now much larger and more visible. And the fire button of Yocan UNI S is rectangular octagon. The LED lights are at the bottom of the front panel.
Main Features:
Metallic body
USB-C Charging
Preset Temperatures
Adjustable atomizer height
Lanyard Hole
Learn more Yocan UNI S features, please visit our official site.
-
Locked
5 Best RDTAs 2020
- By vapbig
- HealthCabin
- 0 Replies
RDTA means Rebuildable Dripping Tank Atomizer. It is a dripper system, which you can “build” your own coil. RDAT also provides the best of both worlds between a dripper and a tank. Most vapors would like to chase a better flavor and clouds production by building their own coils on RDTAs. However, with so many different RDTAs hitting the market, how to find the right one that meets your vaping needs? Previously we have listed the top 10 Best RTAs 2020 and 10 Best RDAs 2020. What about the RDTA? So Healthcabin is here to help you by sharing our 5 best RDTAs. Based on our actual sales quantity in 2020, here we list the 5 best RDTAs 2020 for your reference. This data will be changed every month.
Brand overview, the 5 best RDTAs 2020 come from below 5 brands: Wotofo, Steam Crave, Auguse, Vandy vape& Exvape.
Check our top 5 best RDTAs 2020, discount coupon code is available at the end of the post.
Top 5. Exvape Expromizer TCX RDTA
Top 4. Vandy vape Mato RDTA
Top 3. Auguse Khaos RDTA
...
Please view the whole 5 Best RDTAs 2020 here.
-
Locked
Freemax Maxus 100W Compares With Twister 80W
- Freemax
- 0 Replies
Freemax Maxus 100W or Twister 80W, which one do you like better? What’s the difference between Maxus 100W Box Mod Kit and Twister 80W Vape Pen Kit? One similar feature is that both vape starter kits are originally paired with Fireluke series sub ohm tanks. Maxus 100W comes with Fireluke 3 Tank and Maxus 100W Mod, and Twister 80W consists of Fireluke 2 Tank and Twister 80W VW Mod.
Can you find some difference between Maxus 100W Mod Kit and Twister 80W Vape Pen?
Here are the main features of Maxus 100W:
1. Utilizing FM COILTECH 4.0 with Military Grade SS904L Mesh and Tea Fiber Cotton Formula
2. SmartLoad Tech - No polarity determined, easy battery load in the Maxus 100W Mod. It supports 21700/20700/18650 batteries.
3. Upgraded Top-Fill Mechanism. Compared to Fireluke 2, Fireluke 3 is designed with three steel balls into the top cap to increase friction.
4. Multiple Output Modes and Smart Coil Detection Function
5. FM CHIP Maxus 1.0: Type-C USB Port, 2A Fast Charging and Multiple Protections
Here are the main features of Twister 80W:
1. Patented 90% Tea Fiber cotton & 10% cotton formula
2. Diamond Pattern Mesh Coil Structure
3. Fireluke 2 with Updated TX1 TX2 TNX2 TX3 & TX4 Mesh Coil Options
4. 5-80W Twist-Style Variable Wattage mod with 2300mAh built-in battery
Can you find some difference between Maxus 100W Mod Kit and Twister 80W Vape Pen?
Here are the main features of Maxus 100W:
1. Utilizing FM COILTECH 4.0 with Military Grade SS904L Mesh and Tea Fiber Cotton Formula
2. SmartLoad Tech - No polarity determined, easy battery load in the Maxus 100W Mod. It supports 21700/20700/18650 batteries.
3. Upgraded Top-Fill Mechanism. Compared to Fireluke 2, Fireluke 3 is designed with three steel balls into the top cap to increase friction.
4. Multiple Output Modes and Smart Coil Detection Function
5. FM CHIP Maxus 1.0: Type-C USB Port, 2A Fast Charging and Multiple Protections
Here are the main features of Twister 80W:
1. Patented 90% Tea Fiber cotton & 10% cotton formula
2. Diamond Pattern Mesh Coil Structure
3. Fireluke 2 with Updated TX1 TX2 TNX2 TX3 & TX4 Mesh Coil Options
4. 5-80W Twist-Style Variable Wattage mod with 2300mAh built-in battery