Good point about the lack of hex key for the bf pin. I had a 3/32 on hand and it fit perfect.
Sent from my XT1049 using Tapatalk
Thanks, 3/32 it is!
Another positive review, two thumbs up from Mark:
Good point about the lack of hex key for the bf pin. I had a 3/32 on hand and it fit perfect.
Sent from my XT1049 using Tapatalk
I've been a tank guy for a long time, but I'm about to try squonking. Council of Vapor Wraith arrived today, and my Hadaly is due to arrive tomorrow.
Any special advice for a first timer?
I'm also planning on getting the wraith so I can squonk my hadaly. I'm also gonna get the clear acrylic top cap so can see how wet or dry my wicks are, and to prevent myself from over filling. I was never really interested in squonking before, mainly because all my RDAs were single coil builds on a "dual coil" style deck and I didn't think it would work as efficiently. The set up of the hadaly seems perfect for squonking, and the wraith seems perfect for me. Nice size, good price, and very sleek look.
This might give you some insight... Looks like another budget squonker is on the way... COV WraithVery interested to see how you guys like the wraith. The Hadaly seems to rip through juice quickly and am finding it difficult at times to keep up with it, especially while driving!!
This might give you some insight... Looks like another budget squonker is on the way... COV Wraith
Little problem with the clamping mechanism on this atty, well not really a problem if you don't unclamp your coil, but I did and couldn't get the clamps to break thru the oxidation that had formed on the wire. The coil kept reading too high res.
I guess with the larger footprint and non-abrading clamping action the clamp plates just won't break through oxidation. Lesson learned.
Curious, why unclamp the coil if your not switching it out
So...my Hadaly seems to have an issue with overnight leakage...
Is it because it's a pretty big squonk-hole and not a perfect draining deck? Is it something else?
I can't remember which one, but I've had this happen with some other atty as well - but I do NOT have that issue with 20 other squonker-toppers, with similar builds and wicking.
Any thoughts? Anyone else find a puddle under their mod in the morning?
DAMN good thing it was on a mod I could just rinse off!