maintenance

Recent contents
  1. Vape4ever_Pony

    Vape Pen Maintenance Made Simple

    For vape enthusiasts seeking a comprehensive resource on maintaining their device, the Pilgrim Soul Vape guide on Vapenico is a must-read. This article delves into the intricacies of vape pen care, particularly focusing on Pilgrim Soul vape pens. It covers everything from cleaning and...
  2. Vape4ever_Pony

    Pilgrim Soul Vape Maintenance

    Having issues with your pilgrim soul vape? Our comprehensive guide teaches you how to fix your vape pen cartridge and get back to enjoying your vaping experience. Discover our tips here.
  3. sonicbomb

    Stabilized Wood Maintenance

    An illustrated guide to maintaining and polishing stabilised wood mods. Stabilized Wood Maintenance: Oiling and Waxing - The Vape Snob
  4. D

    Mechanical mod Maintenance

    Hi ECF fans, In this thread we will be discussing maintenance of mechanical mod and its importance. For all mechanical mod users we all know how meticulous it is to maintain a mechanical mod, it is because majority of mechanical mods are made from copper or brass and some parts silver like the...
  5. Mooch

    Minding Your Mechs Ep26 – Clutch 21700 maintenance and performance tweaks

    In this video I cover a few things you can do to maintain your Clutch device and improve its performance.
    • Mooch
    • Thread
    • maintenance mechs performance
    • Replies: 1
    • Forum: Mech Mods
  6. Old Greybeard

    RDA Hygiene and maintenance

    I'm fairly new to vaping, and finally got round to trying out the RDA configuration on my Nautilus Quad-flex tonight. Please forgive this question if it is a bit simple. While I really enjoyed the experience [The cumulative nicotine hit @ 6mg was impressive], dripping through the day is not...
    • Old Greybeard
    • Thread
    • hygiene maintenance rda
    • Replies: 25
    • Forum: RDA
  7. Raan

    2016 Vaper - cCoil: Black Gunk, Prevention & Cleaning?

    Greetings all Been vaping since the beginning of the year... Got myself a 75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil a month or so back Loving the look and feel and flavour... But! I notice the cCoil gets a black gunk build up and a metallic flavour as well as being difficult to...
  8. VictorViper

    Maintaining Copper/Brass and Silver

    If you're going to trade convenience for conductivity, it should be obvious within a few short days that you need to really work at keeping things clean. I have a simple, two-stage process for cleaning my copper, brass and silver, and I wanted to share with you all. You will need: - iodized...
  9. O

    Big Black Wicks

    Kayfun 1.8-2.0 ohm at 3.0 - 3.3V Rayon wicked 60% PG 40% VG ~20Mg NIC LA Cherry Every few tanks I swap the coil and rayon. The buildup is disconcerting. Its all over the coil deck too and down into the air tube. Is this just carbon? I've searched and found other threads a bit inconclusive...
    • OnePercent
    • Thread
    • black gunk health maintenance wicks
    • Replies: 5
    • Forum: RTA
  10. Ndizzle07

    cleaning/lubricating/maintaining your mech mod

    what products do you use to clean and lubricate your mod? I have a stinray x black and Ive noticed that copper takes a lot more maintence. Ive been using vinager and salt to clean the copper parts and it works suprisingly well. I also purchased some simichrome. I havent used it yet but im a...
  11. Dread86

    iClear 30S Cleaning Guide?

    Hey guys! I just picked up a itazte VTR and it came with an iClear 30S tank that I am absolutely loving so far! I just have a question though because my track record with tank maintenance and cleaning thus far has been spotty at best. Are there any REALLY good guides on how to clean an iClear...
  12. Viper41

    Cleaning pcb inside mods

    I have been looking for a way to clean the pcb, under the buttons, etc... with out damaging the pcb or display screen. I have a tesla and the buttons have been getting a bit sticky. probably from some dust/dirt getting in from cut outs and from some juice leaking down into the mod. I might be...
    • Viper41
    • Thread
    • cleaning maintenance mods tesla
    • Replies: 6
    • Forum: Devices
  13. telegraph

    O-rings and gaskets for devices

    Hello all, I have 3 RBA's (Phoenix clone, Wyvern, Igo-S) that use very thin O-rings to keep the pieces together without leaking. Eyeballing them, they seem to have about 1.0 cm diameter. Does anyone know where I can replacements? I've looked at places like Home Depot, but can't find anything...
  14. D

    EGO C maintenance question

    Hey all, So I just got my EGO C today and I really enjoy it, but I don't want to make any mistakes and destroy it :). When I'm not using it, is it a bad idea to set it on the table battery side down? Can this ruin the battery? Kind of a noob question I know, I just want to make sure I'm taking...
  15. B

    Thoughts on head maintenance

    So the community seems to have many competing schools of thought on cleaning, maintenance, and revival of atomizer heads. I have a few Kanger T2s that I've rotated some heads through. I've been rinsing them with hot water and allowing to dry, but that isn't really taking care of the...
  16. ShogaNinja

    Stardusts - How to maintain them and adjust airflow and help fix tight draw

    It's not a perfect fix. Apparently you need to get a 510 cone adapter to get a real good draw out of them (they are about $2.49 on Madvapes) but I know a lot of people suffer from this problem and here's a semi-fix until you get a cone adapter. Moving the center post with any success is going to...
  17. Shaka Zuluf

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    Hi all, I discussed about this issue on several e-cig forums, tried many different approaches. This method is probably most reliable and most generalized, so I would like to share it with you. This method removes all dirt and leftovers from your wick and heater, making your aty almost new...
    • Shaka Zuluf
    • Thread
    • cleaning ego-t ego-t atomizer maintenance provari repair vapor pro wick
    • Replies: 82
    • Forum: eGo Type Models
  18. jackoboy82

    Tornado/Ego tank

    Was looking for a way to clean these and wanted to know if anyone had any suggestions????
  19. RippleInStillWater

    Have I ruined cartos by the score???

    Ohh, jeez, I've been reading about how the cartos have to stay damp -- I have dried my cartos after boiling completely I believe and now I am wondering if that has completely ruined them. I was doing the double boil routine to clean out the juice after a couple fills and then drying at low temps...
  20. RippleInStillWater

    What Liquid is Best for Cleaning KR808's?

    I have seen both ways plugged on the forum but I was wondering what you all thought was best for cleaning my KR808-D's? I've seen rubbing alcohol, everclear, high-proof vodka, and peroxide used for soaking the battery end for 10+/- minutes, then wiping and drying. I think one of those...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu