Hi!
Please recommend direct lung single coil RDAs that work nice with simple wires (micro coils)
So far i know hadaly and gas mods gr1. Any other?
Thanks!
So if you ask most people, cloud chucking is all about sub ohm coils and you HAVE to have a mechanical mod and sub-sub-sub... SUB ohm build. This is NOT true. If you only have a mech mod, yes, then sub ohm coils = bigger clouds. Fortunately we now have regulated mods.
Sub ohmers using a mech...
New to SS and Temp Control. Wondering if ‘spaced’ coils are absolutely required using SS in temp control or can I use (Twisted/Vertabraid/Clapton etc. SS 316L wire) 'micro' coils (wraps touching) in temp control? I know I can use SS micro coils in wattage mode but unsure about using various...
I've noticed that when I am watching coil building videos they use drill bits and talk about the diameter with fractions and seconds and such. I have a 3mm & 2mm rod i use. What is the equivalence of the mm to the drill bit fractions?? Thankd in advance!
I have thus far been unsatisfied with the vapor production of my Zenesis 2. I have been using 3/4 wrap of 28g wire. I keep seeing these microcoil builds with the coils touching and want to give it a try....but I thought if the coils touch, that constitutes a short.....looking for some advice.
http://youtu.be/QnVQ0AMRUto
THESE THINGS TAKE FOREVER TO UPLOAD :)
This is a very nice atomizer. I have cleaned it and am vaping it as I speak (write). Note to self (any ya'll) always wash out a new atomizer to remove any residual machine oils BEFORE YOU BUILD :)
I use a few drops of dawn in...
I need some advice with my setup. My cotton pad (Muji Cut Cotton) keep breaking into half in the middle of the micro coil after vaping 3ml of juice or less.
My setup:
Authentic Kayfun Lite Plus v2
Temco Kanthal A1 28awg 1.43 ohm micro coil on 2mm diameter
Cotton cut into strip along the...
So I started out with an eGo clone. Used it for about two weeks.
Then I upgraded to an Itaste VV/VW V3 and got some Nautilus Mini BVC tanks. (Flavor WOW! - Buying Coils BOOO!) I tried rebuilding the coils and managed to do it, but at 0.6ohms (so it wouldn't work with my Itaste). Love the...
In this video I demonstrate how I prepare my cotton and take you thru wicking single and dual coul setups.
Its just too damn easy and the vape is off the chain :)
http://youtu.be/iZcY7539wRM
Spheroid ~ Reinvented with SS Mesh
Step-1: Sizing the Mesh
I used 400g Mesh and cut it to a 40x25 mm piece. Using the length of the weave I folded one end of it neatly, creased it and then used a needle at the other end to give it a feel of the roll.
Step-2: Tight but Hollow Roll
Using...
Just got an eleaf ohm meter. Took a coil top atomized I built that works and tested it. Its 32g micro coil I think 9 or 10 wraps on a 1/16 drill bit, cotton, and it tested at 3.9 ohms. That doesn't make sense. Put my variable voltage matrix-s battery on it and each setting hung out at 3.5 volts...
Ok so i watched some videos on the tube about micro coil set ups in the kayfun 3.1 so i decided to try it now i will tell you i didnt find anything i liked about it at all there were many cons about it and i will list them.
1. Uses more wire
2. Takes longer to heat up and get vapor from it
3...
Hey,
I use .32 gauge kanthal A1 and 2.5mm VoodooWool (silica) I've been experimenting with different builds on kanger heads and feel I can hit the resistance I seek (2.5) with 6 wraps of the .32 Kanthal.
The problem is that without a flavour wick; I instantly get persistent gurgling. If I add...
I'm a newbie to the RDA world for the most part. I tried some RBA's in the past but that was about a year ago. I got my Trident v2 in the mail today and bought some organic cotton and 28 gauge kanthal. I'm doing about a 10 wrap micro coil. Getting 1.9 ohm. The cotton tasted a little off so I...
What technique is best for getting the coils to have continuous contact? / having all the coils touching? It seems like I try like heck to wrap them so close that they touch but when I take out the nail/pin whatever they always spring away from each other. I am using 32 guage because that was...
So, I've been dicking around with my first RDA and mech mod for about 3 weeks now, and have built all all manner of coils for the thing in my quest for the perfect vape.
Currently stuck with 32g kanthal, I have had issues making coils with low enough resistance for my tastes-...
EDIT : Moved to RBA sub-forums
http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/520042-rda-micro-coil-muted-flavor-issues.html#post12029930
Why can't I delete this? seems more difficult the I would assume it should be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.