Picture of Your Setup Part 3!

[Matty316]

why not?

 

[YourPalMark]

Nothing fancy here, just solid, reliable stuff. (pioneer4you IPV5, uwell Crown, and my favorite juice, Mad Mango)

 

[pufZeppelin]

Nothing fancy here, just solid, reliable stuff. (Pioneer4you IPV5, Uwell Crown, and my favorite juice, Mad Mango)

hey welcome

pretty cool, looks like a simple, trouble-free set up...

 

[Fozzy71]

Kanger STM on a beat up istick 30w for puffin and sipping some knob creek single barrel 120 proof bourbon:

vaping SCH:RY2K as that is my biggest stash of pre-made til all my nic/flavoring/freezer show up and I learn how to DIY.

 

[rhelton]

Nothing fancy here, just solid, reliable stuff. (Pioneer4you IPV5, Uwell Crown, and my favorite juice, Mad Mango)
View attachment 582289

Nice set up

I have been using a original Arctic tank with a RBA for a few weeks now and its just a great vape and has become my go to it seems. There is allot of "older" gear that is still just as good as the new stuff coming out.

 

[crazymas0n]

Just joined the forums and picked up this setup the other day: Loving it so far!

 

[jgreck]

Here's my current setup:

Not much, but it's my daily driver and she chucks the clouds.
iPV3 Li + Tobeco Velocity Clone
Currently rocking a single 0.32Ω alien coil

 

[Mowgli]

Here's my current setup:

Not much, but it's my daily driver and she chucks the clouds.
iPV3 Li + Tobeco Velocity Clone
Currently rocking a single 0.32Ω alien coil

Good setup. Area code check last August

 

[ToolmanTexas]

There is allot of "older" gear that is still just as good as the new stuff coming out.

+1 for this nugget of truth!

 

[CharTech]

My new Goon RDA..

 

[CharTech]

My goon build..

 

[Rixsta]

 

[Aneoooow]

My current and only setup. I must admit i'm inlove with small devices.

 

[Haylon357]

What is that mod? Is that the original 35w Yihi board upgraded to 50w?

They were advertised as the pioneer4you ipv gl 50. Found one video on YouTube but it was foreign. I read somewhere where they were mostly sold in other countries. Beats me but I like em. They were advertised as a 26650 battery mod. But they are 18650's. Bad thing is they require button top batteries. I did the magnet trick but I'm not comfortable with that solution. I'm going to have to hunt for good button top 18650 batteries. I just don't have clue which ones are good

Sent from my LG V10 using Tapatalk

 

[jgreck]

My goon build..
View attachment 582397

Awesome build. I've done something very similar with my velocity, 26x32ga ka1 clapton parallel with 24ga ka1; absolutely loved it. Cheers!

 

[MikeyConti]

They were advertised as the pioneer4you ipv gl 50. Found one video on YouTube but it was foreign. I read somewhere where they were mostly sold in other countries. Beats me but I like em. They were advertised as a 26650 battery mod. But they are 18650's. Bad thing is they require button top batteries. I did the magnet trick but I'm not comfortable with that solution. I'm going to have to hunt for good button top 18650 batteries. I just don't have clue which ones are good

Sent from my LG V10 using Tapatalk

Have you looked at these?
Samsung 25R 2500mAh 20A and LG HE4 2500mAh 20A

Both are Great batteries!

Samsung INR 18650 25R Battery (25R2 & 25R5) FLAT OR BUTTON TOP

LG HE4 18650 2500mAh 20A Button Top Battery

 

[CharTech]

Awesome build. I've done something very similar with my velocity, 26x32ga ka1 clapton parallel with 24ga ka1; absolutely loved it. Cheers!

That's my build exactly. Single coil 7 raps 3MM ID .32 Ohms. Great flavor.

 

[Haylon357]

Have you looked at these?
Samsung 25R 2500mAh 20A and LG HE4 2500mAh 20A

Both are Great batteries!

Samsung INR 18650 25R Battery (25R2 & 25R5) FLAT OR BUTTON TOP

LG HE4 18650 2500mAh 20A Button Top Battery

Thank you for the input. Definitely ordering some.

Sent from my LG V10 using Tapatalk

 

[tbrat]

My current set ups....

 

[jgreck]

That's my build exactly. Single coil 7 raps 3MM ID .32 Ohms. Great flavor.

Very nice. I think if I recall correctly I was running 8 or 9 wraps on a 3mm ID dual coil build. Ohm'd out at 0.20. Man.... That thing ripped. Getting me all nostalgic on my build, I think I'm gonna have to throw one together tonight