Search results
-
READYxWICK for non cotton people
Pls post the info. I will try a 3/32 coil tmrw. 7/64 is not tight but it has been working well for me. Biggest issue with the 3mm rw is the unraveling when trying to get it through the coil and after using for a bit. I am all ears here :) -
READYxWICK for non cotton people
Don't hv the Ti dripper so I can't give you an answer on that. -
READYxWICK for non cotton people
Not sure if it wicks better or simply "holds" more liquid. Holding more liquid is important to me on the smaller toppers like the rm2 or cyclone. I will try to test it out in my Odin this weekend and see if it works as well at .5 as the CC does. -
READYxWICK for non cotton people
7/64 ID for the bigger RW. I attached a quick pic I just took from my phone showing the 3mm RW on my cylone. I don't have the P2 with me. If I take this cyclone and wash off the liquid and dry burn it, you can see very well the inside hole as it glows a bit. It would be much harder to see on the... -
READYxWICK for non cotton people
I used to loop either silica or RW and hand wind the kanthal around but I have found that 3mm RW flows better (when you run sub ohm) if you thread the single wick through the coil so I am going to a single wick (no loops) on my heron and Prometey 2. I think this is because hand winding binds... -
READYxWICK for non cotton people
RW 3mm is all I use in my Promety 2. Lasts forever. -
READYxWICK for non cotton people
I use RW in most of my attys, especially the extra small chambered ones. I like the extra protection of the RW not burning up like CC or Cttn. So far in the Odin I am using CC for its fast wicking abilities but will try 3mm RW next time I change the coils. -
-
GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 3
The pond is easier than the pool. I'll bring my fly rod down and see what you have in there :) No gators I hope! -
READYxWICK for non cotton people
I usually rinse mine with hot water before I dry burn. If I don't, it tends to flame up. -
READYxWICK for non cotton people
I have been using RW for several months now. Here is what I have settled on for my rm2 and cyclone. 7/64 ID with 3mm RW. Didn't have as much success with the 2mm but I do use it in other set ups. -
What do RDA lovers vape during the day ?
After all these years I have thinned the herd of anything that let me down. KFLs where the worst for me and I have tried just about all of them. For me a top drip atty...prometey 2, spheroid, etc or a bottom feeder are the only things that have never left me stranded. I always carry two just...- pt91
- Post #37
- Forum: General Vaping Discussion
-
Hey from awful Arkansas
welcome. I actually moved here almost 15 years ago and love it. Started vaping in 2009. Not so much where you live as it is what you do :)- pt91
- Post #5
- Forum: New Members: Introduce Yourself!
-
GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 3
cape cod clothes are fine. This is coming from someone that spent many years preparing show cars for shows. rub gently. it is a chemical cleaner. If you have abrasions there are other ways to deal with those -
How often do you change your cottons / coil ?!?
KGD was once a day. Rayon is every 4 or 5 days. Readywick once every couple of months if not longer.- pt91
- Post #8
- Forum: General Vaping Discussion
-
What Have We Here?
I had another rda a long time ago that seemed to be immune to dawn, toothbrush, everclear and the UC. Once I realized the oil was down inside the post holes I took off the screws and got soap/dawn in there with bristle tips. Took me two weeks to figure that out! -
Flying soon
only time I got pulled aside I the last 5 years was for my microstick. they didn't recognize it. International is different. dismantle and diffuse- pt91
- Post #5
- Forum: General Vaping Discussion