Odin's are back in stock. I ordered one this morning. I've never built a dual-coil. Think I can do this? I guess the thing that sold me was the deep deck and plenty of room to build dual-coils. 
Odin?!
- Thread starter Myah_June2014
- Start date
- th_trl_thread_readers 0
- Status
Odin's are back in stock. I ordered one this morning. I've never built a dual-coil. Think I can do this? I guess the thing that sold me was the deep deck and plenty of room to build dual-coils.
Yes you can do it. If I can do it anyone can. Here's my latest video on it:
http://youtu.be/Uo4tbAVaZws
And here's how I get those perfect coils:
http://youtu.be/s_DLLILgajE
If it wasn't easy I wouldn't be doing it. If it didn't provide an AYuss whooping vape I wouldn't be doing it. It's both. So I do it
Last edited:
Thanx Craig
Hope you had a profitable trip!!
Hope you had a profitable trip!!
Update: Was at ECC all weekend so any emails/pms I will be getting back to today.
I guess this was a double post so I'll edit here and take this opportunity to say I sure am enjoying my Reos!
And to ask....do the rest of you always put an O-ring at the base of your attys on your Reos? Do you use one with your Odin at the very bottom to prevent juice leaks?
And to ask....do the rest of you always put an O-ring at the base of your attys on your Reos? Do you use one with your Odin at the very bottom to prevent juice leaks?
Last edited:
Yes you can do it. If I can do it anyone can. Here's my latest video on it:
Dual OG Micro Coil & KGD Odin Atomizer Build Tutorial - YouTube
And here's how I get those perfect coils:
super_X_drifter OG Micro Coils - Artistic Wire Coil Gizmo - YouTube
If it wasn't easy I wouldn't be doing it. If it didn't provide an AYuss whooping vape I wouldn't be doing it. It's both. So I do it
Your words are most encouraging! I'm looking forward to watching your videos and thank you for posting the links!
By the way, my new Reo is 'Out for Delivery' today so I'll have it all juiced up and ready for Monday Night Football! I'm guessing my Odin will be here this week so I'm looking forward to that too. Thanks again super-duper!
Wish I knew where my 2nd Odin was.....delivered on 9/4 says the tracking, but it wasn't there.
I guess this was a double post so I'll edit here and take this opportunity to say I sure am enjoying my Reos!
And to ask....do the rest of you always put an O-ring at the base of your attys on your Reos? Do you use one with your Odin at the very bottom to prevent juice leaks?
I use an o ring on mine. I have 3 Odins and 3 Reos. It depends on the center post/510 connection, whether I use the 10mm x 1mm or the 10mm x 1.5mm.
Thanks! I'm stocking up.
SoCalCraig....is that the O-ring that fits between the base of the Odin and the Reo? Thanks in advance!
Thanks for that. I always feel better with a couple spares in the toolbox. Any chance we could get the specs on the screws? I'm sure I'll loose one in the carpet at some point. If you ever wanted to put a cheap little spares bag on your site with a couple o-rings and a few spare screws you would probably sell one with every atty if the price was right.
I'm loving my Odin btw. Easy to build on, easy to clean, and vapes fantastic.
The o-rings your talking about are for the Reo and any atomizer not LokiLab's responsibility. Other bottom feeders don't need them and technically the Reo doesn't need them either. People just like to use them to get a little more flexibility in where they place the air holes on the atomizer and to protect against leaks. (not that there should be any)
Rob has them on Reosmods.com . Two different thicknesses. 1mm and 1.5mm
http://www.reosmods.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=769&category_id=32&option=com_virtuemart&Itemid=3
http://www.reosmods.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=985&category_id=32&option=com_virtuemart&Itemid=3
Rob has them on Reosmods.com . Two different thicknesses. 1mm and 1.5mm
http://www.reosmods.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=769&category_id=32&option=com_virtuemart&Itemid=3
http://www.reosmods.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=985&category_id=32&option=com_virtuemart&Itemid=3
Also waiting on new Router drip tips. Love the look.
Any ETA on the Router tips? Want to place another order for an Odin but, want to save on shipping.
Finally got mine today and boy, that box it was mailed in took a beating! LOLOL...It was pretty easy to build (especially compared to the small deck space of the RM3). Used 28g @ .7 Ω with KGD.
First couple draws, it hit like a Mack truck! Lots of vapor, warm and thought maybe I went possibly too low in OHMs..then it cooled off...a LOT?? It's now a cooler vape than expected. I changed my batts thinking maybe my batts were low but it's not.
Anyone have tips on how I can get it to be a warmer vape and keep it warm? I tried playing with air holes but wasn't sure if it was ok to use only one open with a dual coil set up.
First couple draws, it hit like a Mack truck! Lots of vapor, warm and thought maybe I went possibly too low in OHMs..then it cooled off...a LOT?? It's now a cooler vape than expected. I changed my batts thinking maybe my batts were low but it's not.
Anyone have tips on how I can get it to be a warmer vape and keep it warm? I tried playing with air holes but wasn't sure if it was ok to use only one open with a dual coil set up.
You can use 1 closed, but for warmer I'd drop it down to .5 ohms, also might adjust the position of the coils so more middle rather then close to the afc, of course this will also adjust throat hit and flavor so it will take some playing.
I'm still playing with mine to get it where I want it, using it at home only until I find the spot, in the meantime I'm sticking with my cyclone as I've got that one set
Last attempt on the Odin was dual triple twisted (2) 32 gauge and (1)28 gauge was coming out .35 which is a little lower then I wanted to go so have to add a wrap on each coil and I think I'll be where I like it.
I'm still playing with mine to get it where I want it, using it at home only until I find the spot, in the meantime I'm sticking with my cyclone as I've got that one set
Last attempt on the Odin was dual triple twisted (2) 32 gauge and (1)28 gauge was coming out .35 which is a little lower then I wanted to go so have to add a wrap on each coil and I think I'll be where I like it.
That is what I was thinking too. Happened to me the other day.
I would double check the screws and make sure nothing loosened up. If that doesn't help pull the wicks and dry fire it to make sure everything is heating up evenly.
Pull your top cap off, and check to make sure that when you release pressure on your bottle (de-squonk), the excess juice is draining back into the bottle. Otherwise, you're just flooding your coil.
Thanks guys. I took off the atty and checked the ohms again on the multimeter...no change in ohms, screws were tight, squonking correctly. I did raise up the coils a tad and closed the air holes to one and a half. Vaping warmer now. My next build. I'm going to try lower ohms. But it does vape awesome
- Status
Similar threads
