A turn of the screw...or two...or three...four anybody?

Status
Not open for further replies.

uzzaperez

Ultra Member
ECF Veteran
Oct 12, 2009
1,031
198
Perez-uzza to this day
I don't use a multimeter, and really don't care to. I adjust my Buzz by feel and by the results I'm getting from my atty/juice combo.

That said, I usually adjust one turn at a time - 360 degrees from the original setting, so that I have an idea where I am and can go back to square one at any time.

I'm pretty curious, though it probably varies somewhat from device to device or depending on what voltage you are already at, what is the approx voltage change from one full turn of the screw up or down from the original 4.5 volt setting?

Anybody? How many turns to 5 volts? 6 volts? Based on the experience of you multimeter users?
 

uzzaperez

Ultra Member
ECF Veteran
Oct 12, 2009
1,031
198
Perez-uzza to this day
Nice. Thanks for posting that. I've never been all the way to the end of the spectrum on either end - can you screw the screw too far? does it automatically stop if you screw it "in" all the way, or does the screw pop out if you screw it "out" too far?

I vape by feel so I'll probably never reach the "ends" anyway, but I'm still curious to know what happens with the screw on the "ends" of the spectrum.
 
Status
Not open for further replies.

Users who are viewing this thread