AGA-T Help

[paulishuku]

Hey everyone,

Just got my new AGA-T in the mail. It's my first genesis style rba. So ive been doing the tutorials on youtube, and got the stainless steel mesh down. However, I cant figure out for the life of me where Im supposed to fill the tank at? I used my syringe to go down in the hole where the mesh sticks through, but im thinking there has to be an easier way. I noticed theres a post with a small screw with two holes in it, but Ive tried squeezing juice through it and it just fills up the top of the atomizer.. Im thinking its more of a draw control.

Heres a picture, any help would be appreciated.

 

[steved5600]

The screw on the opposite side of the wick or the one next to it. Depends on where you ground your coil. Just remove the screw and there will be a hole leading to the reservoir.

 

[steved5600]

You may want to keep a couple of tooth picks around to use as a dip stick to test the level of your juice.

 

[paulishuku]

Awesome thanks!!

 

[steved5600]

Damn I'm forgetting stuff. LOL You'll need a pipette or a syringe to fill it easy or a long needle tip. One more thing the hole in the top half needs to be as close to the wick as possible you may have to fiddle with it a bit but since is has an o ring you don't have to have it real tight.

 

[paulishuku]

What do you mean as close to the wick as possible? Are you talking about the threaded rod through the center?

 

[RsK0807]

He's referring to the air hole in the Top Cap. Best Vapor and Flavor comes when the air hole lines up directly with the wick.

As for the fill hole, he's right, it's the hole on the opposite side from the wick hole. just pull the screw out, fill, and replace screw if you feel the need.

 

[Unforeseen]

Moved to Assorted PV Topics - Rebuildable Atomizer Systems