Alexander Mundy's Magic Twisted Ribbon

[pdib]

when I countertwist, it very quickly gets to a point where, if I release it (in a controlled fashion), it just unwinds any built up tension. (it counter-counter twists back to a relaxed state) I just figure that's good .. . . . .. I certainly can't twist it any more . . . cause it just untwists and finds it's place. I can't really twist it any less, cause I see it all coming together, and it looks good. did I get the fancy wire? . .. .. that tell's me where it likes to be?

 

[TheKiwi]

So. My latest 4 batches, 5wraps around 1/16 drill bit gives me 0.55 to 0.6 ohms. That sound about right...? I'm guessing if that's lower than what y'all are gettin, I'll reduce my counter twist.


Burping out loud using Tapatalk

 

[Alexander Mundy]

So. My latest 4 batches, 5wraps around 1/16 drill bit gives me 0.55 to 0.6 ohms. That sound about right...? I'm guessing if that's lower than what y'all are gettin, I'll reduce my counter twist.


Burping out loud using Tapatalk

Sounds about right. IIRC about 5.5 ohm per foot.

 

[mitchg]

I have the twisting of the first wires down (when they don't break on me?) But the interlocking is getting me. Might be over twisting. To me the section on the right looks good. But on the left looks bunchy and random. Am I over twisting Mundy?

 

[mitchg]

K it doesn't have a spot to upload a pic?

 

[mitchg]

 

[onjre]

It does look a bit over-twisted on the left. I twist it until it just interlocks and forms a single strand. It looks more even that way (like the right side) but I can't really tell much difference in the vape if I accidentally over-twist it.

Cut that piece in half and wrap two coils and see if you can tell a difference side by side. It's all about how it vapes to YOU anyway.

 

[Alexander Mundy]

^^^^^^^^^^^^
What he said.

 

[Borescoped]

Looks like RiP Trippers just did a video on MM wire. He changed the wire size though.


Sent from my iPhone using Tapatalk

 

[Aal_]

Look Alex you're on TV lol

Sent from my SM-N9005 using Tapatalk

 

[Aal_]

I dunno why rip said that it is difficult to do with 2 strands the 6 x 0.07. Where did he get 2 strands from. Isn't mundy magic done with 1 strand to begin with?

Sent from my SM-N9005 using Tapatalk

 

[SLIPPY_EEL]

we need to send him some proper Magic Mundy Wire to try

 

[Vince159]

OK. gonna give this thing a try for the first time today. Wish me luck.

 

[TheKiwi]

OK. gonna give this thing a try for the first time today. Wish me luck.

Good luck!!


Burping out loud using Tapatalk

 

[Vince159]

Good luck!!


Burping out loud using Tapatalk

Thank you. I'm just going off the film, and I think I'll try it with 2 strands first> what do you think?

 

[TheKiwi]

Thank you. I'm just going off the film, and I think I'll try it with 2 strands first> what do you think?

I would say go straight to 3 if you've done triple twisted before (if you have the right wires)

The most important thing for triple twisted anything is that equal tension for all 3 strands is super ridiculously important. I'm not too good at maintaining that so I get 1 or 2 spots of weird twists along a 2 feet length. I find that even with the slightest tiniest slack, you'll end up with a small bunches up section

Burping out loud using Tapatalk

 

[Alexander Mundy]

If anyone has been watching the "sick as teets" show I should make you aware that I do 3 individual strands then back twisted them together. Best with .6mmX.07mm Kanthal. Not sure where he thought I was twisting 2 strands together in the first step, although some do leave out the 3rd strand in the second step for VV devices that can't do sub-ohms or for an atty that cant fit the 3 strand. Maybe that got misconstrued. Anywho, lots of subscriptions to my YouTube coming in today.

 

[Vince159]

I would say go straight to 3 if you've done triple twisted before (if you have the right wires)

The most important thing for triple twisted anything is that equal tension for all 3 strands is super ridiculously important. I'm not too good at maintaining that so I get 1 or 2 spots of weird twists along a 2 feet length. I find that even with the slightest tiniest slack, you'll end up with a small bunches up section

Burping out loud using Tapatalk

OK, I'll do it. Thanks Ino.

 

[Vince159]

If anyone has been watching the "sick as teets" show I should make you aware that I do 3 individual strands then back twisted them together. Best with .6mmX.07mm Kanthal. Not sure where he thought I was twisting 2 strands together in the first step, although some do leave out the 3rd strand in the second step for VV devices that can't do sub-ohms or for an atty that cant fit the 3 strand. Maybe that got misconstrued. Anywho, lots of subscriptions to my YouTube coming in today.

I never saw any other video than your's Mr. Mundy, I just thought I'd try 2 first because I'm inexperienced at twisting wire (I only did it once before) so I thought it might be easier to take it step by step, but I'll follow your instructions, I'm sure it'll be fine.

 

[Aal_]

If anyone has been watching the "sick as teets" show I should make you aware that I do 3 individual strands then back twisted them together. Best with .6mmX.07mm Kanthal. Not sure where he thought I was twisting 2 strands together in the first step, although some do leave out the 3rd strand in the second step for VV devices that can't do sub-ohms or for an atty that cant fit the 3 strand. Maybe that got misconstrued. Anywho, lots of subscriptions to my YouTube coming in today.

Exactly I was all confused at first I repeated this section like 3 times then re watched ur videos. Someone has to tell him something lol.

Sent from my SM-N9005 using Tapatalk