you're quite the crafter aren't choo Mr Badkolos ?
I had heard him called "crafty"... but I'm not sure they meant it in the same manner
- Status
I had heard him called "crafty"... but I'm not sure they meant it in the same manner
Anyvape shows the same cap being used for the single 18650 and single 18350 configurations. Looking closer, it looks like the stacked 18350 cap allows the batteries to protrude further into the cap while they look the exact same from the outside. I do use the stacked configuration at times. Bad, do you know if you guys have or can get the stacked configuration end caps?
yes the cap to stack comes with the small tube, you cant use that end cap on the big tube with the 18650 to stack so we made it were you get the cap and the small tube.
price wise it wasnt worth to get both seperate,m so when you buy the small tube you get the cap to use 18350 with he small tube and that same cap can be used on the big tube to stack 2 18350's
price wise it wasnt worth to get both seperate,m so when you buy the small tube you get the cap to use 18350 with he small tube and that same cap can be used on the big tube to stack 2 18350's
Last edited:
Looks like I shouldn't have doubted the original answer. Personally I'd prefer both caps with the longer tube, but I can see how that makes sense cost wise and is probably best for most users. Thank you for clarifying that Bad.
I was looking at Plasti Dip last week as my SLB VV started to peel off. They are using Plasti Dip to paint cars too. Interesting concept.
Check dipyourcar.com.
Check dipyourcar.com.
we will also carry just the end caps for you stackers so dont worry, we will carry everything that is anyvape, to me they are incredible, look good, come apart fully, can be used with long or shirt tubes and stacked, features are great, menu isnt that hard once you learn it, the power behind it is great, and you also can choose 2 styles and 4 or 5 amp limit, feature wise it does it all like the other mods out there and most important is feels right, not light not to heft, ill take this over any other similar looking mods made here in america.
ORBACh yeah i plastdipped my whole car and rim and it came out great, any booboos, peel it off spray again, but for the mods its do easy and comes out great, you can use the spray can or the dipping cans and you can even blend colors with these
Plasti Dip 12209KIT Performix Multi-Purpose Create Your Own Color Rubber Coating Kit
plasti dipping the k100 is easy, so is the kts and the mini zmax but the anyvape is the easiest out of all of them because of how it comes apart even the top cap, so its easier with less chance of any screw ups plus the rubber feel is cool and you can layer it up as many times as you like but 2 layers is usually more then enough, you can always use paint markers to paint it with coll effect but that permanent versus dipping which is eay and changeable with no headaches, it peels right off yet no issues while using it dropping, it actually gives you a layer pf protecton if you drop it
ORBACh yeah i plastdipped my whole car and rim and it came out great, any booboos, peel it off spray again, but for the mods its do easy and comes out great, you can use the spray can or the dipping cans and you can even blend colors with these
Plasti Dip 12209KIT Performix Multi-Purpose Create Your Own Color Rubber Coating Kit
plasti dipping the k100 is easy, so is the kts and the mini zmax but the anyvape is the easiest out of all of them because of how it comes apart even the top cap, so its easier with less chance of any screw ups plus the rubber feel is cool and you can layer it up as many times as you like but 2 layers is usually more then enough, you can always use paint markers to paint it with coll effect but that permanent versus dipping which is eay and changeable with no headaches, it peels right off yet no issues while using it dropping, it actually gives you a layer pf protecton if you drop it
Last edited:
Very nice! I would agree. I love my Sigelei Zmax, but it is heavy (plus and minus depending on circumstances/prefence) and my eVic, but it's not as powerful. The CVI has flush mounted ego connection with proper airflow, removable top cap (convenient if you get a T3 base stuck in there, yes it's happened), more flexible battery configurations, and all the color options with the ability to change on a whim if one buys additional tubes. It's like they took all the best features of the other mods out there and combined them.
Plus, if I am seeing the pictures correctly, the 510/ego connector is attached to the control head on the V2 and part of the top cap on the V1. As mentioned earlier, T3's can/will bottom out and the knurled base is unavailable on the V1. But, on the V2 it would appear that the top cap could be removed exposing the 510/ego connector making it easier to remove the T3 without spilling the juice. Also, reading the display on the V1(aka CVI) is designed for right handed viewing where the CVI V2 is omni viewing.and according to the specs in the OP ...4amp limit versus 5amp limit
I like V1 best.......but that's just my personal preference
Looks like this might be the better site as you can select your own colors rather than getting one of each in a kit. But, as I'm broke, I will be waiting until the individual components are available(CVI V2 as I'm a T3 kinda guy(already have a CVI), and in factory rubberized colors.
you can remove the top cap on both and use the t3 fits perfect on both
thats why i love the anyvape, if a carto doesnt fit, remove the cap and presto
thats why i love the anyvape, if a carto doesnt fit, remove the cap and presto
Last edited:
With the removable cap design, it just seems like it will be so much easier to clean the drip well and 510/ego connector than most other vw devices out there.
Mine's in transit, so I should be getting it on Saturday or Monday. I haven't been this anxious for my vapemail to arrive for a long time.
Last edited:
Don't know if you were responding to my post, but not to argue, the connector on the V1 is attached to the cap meaning even if you remove it the base of the T3 is still covered. But in the pictures of the V2, the connector is attached to the control head meaning if you remove the cap the T3 base will be exposed. But of course if the V1 has been modified so that the connector is now attached to the control head too, then never mind.
yes i dont know know what you mean, on both v1 and v2 the cap removes and exposes the ego connector, they are exactly the same on both units and the t3's fit just fine, doesn't look super nice but makes anything usable on the anyvape, thats how they both look like without the top cap, they are exactly the same
yes i dont know know what you mean, on both v1 and v2 the cap removes and exposes the ego connector, they are exactly the same on both units and the t3's fit just fine, doesn't look super nice but makes anything usable on the anyvape, thats how they both look like without the top cap, they are exactly the same
Cool, this means this is one of the improvements to the V1. Thanks for the pictures. Please add that picture to your site.
Hey Bad Crafter....Did you see this ? The 3D Printing Revolution gets its First Pen | This Could Be Big - Yahoo! News
I want one ! That looks COOLIO !
Hi Paddy 
Hey Bad Crafter....Did you see this ? The 3D Printing Revolution gets its First Pen | This Could Be Big - Yahoo! News
- Status
Similar threads
- Locked
