Poor old Victor must not be able to put that new Ares down long enough to report back to us.
Last edited:
- Status
Some first impressions:
1. Packaging/goodie bags/manual - really well done. Anyone who is new to building will finding everything she/he needs to start.
2. Exterior machining/ threading is excellent. Some minor machining marks on the internal pieces, but nothing extraordinary or visible when rta is in use.
3. Everything fits snag, AFC ring is not to loose or too tight. Perfect.
4. Yes, stamping/etching/branding is everywhere, even under the sliding cap
5. Vape is very quiet and flavour is very good but I need more time to test it side by side with my other atties.
6. Minor issue (nitpicking). The silicon piece around the juice filling port is a bit too thick and catches between sliding cap and the other piece when you closing it.
1. Packaging/goodie bags/manual - really well done. Anyone who is new to building will finding everything she/he needs to start.
2. Exterior machining/ threading is excellent. Some minor machining marks on the internal pieces, but nothing extraordinary or visible when rta is in use.
3. Everything fits snag, AFC ring is not to loose or too tight. Perfect.
4. Yes, stamping/etching/branding is everywhere, even under the sliding cap
5. Vape is very quiet and flavour is very good but I need more time to test it side by side with my other atties.
6. Minor issue (nitpicking). The silicon piece around the juice filling port is a bit too thick and catches between sliding cap and the other piece when you closing it.
I can't deal with that green.... Either that, or I am attempting to not purchase ANOTHER RTA, there's really only so many that I NEED. WANT? Well, that's a different story.
Anna
Either that, or I am attempting to not purchase ANOTHER RTA, there's really only so many that I NEED. WANT? Well, that's a different story. Anna
But it comes with black and white O rings, too...
@VictorC, what mechanism opens and closes the sliding top cap? Does it lock by that silicone around the fill port? My questions come from wondering just how long before the sliding cap starts loosening up - possibly in a purse or pocket. :eeks:
PS. That's a cute touch!
@VictorC, what mechanism opens and closes the sliding top cap? Does it lock by that silicone around the fill port? My questions come from wondering just how long before the sliding cap starts loosening up - possibly in a purse or pocket. :eeks:
PS. That's a cute touch!
Black,white or green, they all come with it. Just a enablers 2 cents.I can't deal with that green....
Anna
Thanks, Victor, for taking one for the team!
Airflow, how's that airflow? Tight? Very tight? Not so tight?
Airflow, how's that airflow? Tight? Very tight? Not so tight?
I kind of like the green, could be worse...they could have included Dimitris favorite - pink
[emoji16] Just had to.
Sent from my Pixel using Tapatalk
Sent from my Pixel using Tapatalk
Just had to.
Stop taking pictures! Just wash it, put it together, have a vape and report!
I saw on Facebook that other colors of Orings will be coming, including PINK! Can't remember the other colors. (I got stuck on the PINK)!
I would, but I got a new tablet in the mail too. The geek in me comes first. I need to set the tablet up first.Stop taking pictures! Just wash it, put it together, have a vape and report!
I would, but I got a new tablet in the mail too. The geek in me comes first. I need to set the tablet up first.
OK, you have 15 minutes to inspect your tablet!
Thanks for the report Victor, and the fill cap tip.
Now to the flavor. Is it as good as a Hussar, or Berserker, or even a Siren ??
Now to the flavor. Is it as good as a Hussar, or Berserker, or even a Siren ??
@Katdarling - the sliding cap has a ballbearing, you need to push it pretty firm to open/close
@Katya -AFC is flexible within MTL boundaries, from very tight on a single small hole to a very loose when all holes are open
Another niggle - orings on supplied mouth pieces are a bit thin, replaced with my own.
@Katya -AFC is flexible within MTL boundaries, from very tight on a single small hole to a very loose when all holes are open
Another niggle - orings on supplied mouth pieces are a bit thin, replaced with my own.
[emoji16] Just had to.
Sent from my Pixel using Tapatalk
And WHEN the tablet is geeked out, and WHEN you decide to shower us with pics, I'm guessing you WILL have yours set up with the EAGLE GREEN O's! Maybe even a green drip tip?
Congrats, Knees.
I have to wait for that new JAC to get here. It over hangs on everything I own. I put on a ProVari........And WHEN the tablet is geeked out, and WHEN you decide to shower us with pics, I'm guessing you WILL have yours set up with the EAGLE GREEN O's! Maybe even a green drip tip?
Congrats, Knees.
_____ envy.
sorry that is really funny to me.
!!!!!!!
6. Minor issue (nitpicking). The silicon piece around the juice filling port is a bit too thick and catches between sliding cap and the other piece when you closing it.
Wow, thats bad! Are you saying you can´t close the top cap completely and it will stay this way with a bit of the silicone seal squeezed in the top cap? I would not consider this a minor issue... at ALL! Very worrying...hmmm.
K.
- Status
Similar threads
