Aromamizer RDTA by Steam Crave
- Thread starter roxynoodle
- Start date
- th_trl_thread_readers 0
- Status
Wow, dang! And here the other day I told someone I didn't think any tank could push 100W.
We have some cloud chasers here who need this.
We have some cloud chasers here who need this.
I'd just wait for the DNA200 or the Sigelei 150tc! I've heard 6+ complaints about minor flaws with the Snow Wolf. It will work well, no doubt, but it seems too fiddly and unreliable (to me personally) to make it a must have regulated device (still sitting here with a Stingray X clone lol).
I was joking, well, sort of
After my fiasco with the DNA40s I'm unlikely to buy another Evolv product. I may buy or build a two batt sx350J though. Or a Sig 150W.
I have 3 Sig 100Ws and said I would never need more
I was joking, well, sort of
After my fiasco with the DNA40s I'm unlikely to buy another Evolv product. I may buy or build a two batt sx350J though. Or a Sig 150W.
I have 3 Sig 100Ws and said I would never need more
lol, I know them feels. The special edition snow wolf is so freakin' sexy too....
Mine was waiting for me when I got home today. I broke it down and overall it was very clean, no signs of machine oil.
First build is a 26ga dual on a 3mm bit @ .56Ω's on the VF. I loaded it up with some Deadly Sin and fired it at 28.2 watts. This thing hit's like a Mack truck and the flavor is real damn nice. The vape band is a little odd but wide open didn't give me the flavor I was looking for but the vapor production was insane.
The finish and machining is pretty nice. The only complaint I have is the holes for the wire were sharp and I had to take the dremel and a polishing pad to all of them to stop from clipping the wire. I did go to grub screws which I prefer over philips head.
It does hit like an RDA
First build is a 26ga dual on a 3mm bit @ .56Ω's on the VF. I loaded it up with some Deadly Sin and fired it at 28.2 watts. This thing hit's like a Mack truck and the flavor is real damn nice. The vape band is a little odd but wide open didn't give me the flavor I was looking for but the vapor production was insane.
The finish and machining is pretty nice. The only complaint I have is the holes for the wire were sharp and I had to take the dremel and a polishing pad to all of them to stop from clipping the wire. I did go to grub screws which I prefer over philips head.
It does hit like an RDA
Last edited:
Mine is here and built as well.
First thoughts are similar to Marc's:
1. Machining is very good. Above average for authentics in a similar price range.
2. I smelled some machine oil so thoroughly washed it, but I do with everything.
3. Post holes were very sharp and cut through 26g like a hot knife through butter.
4. Wicks like crazy. Have a 0.5 ohm build and ran it up to 50W and no issues. I'm sure I could have gone higher on this build, but I'm all about the flavor.
5. Unbelievably airy, lol! I may block off two holes on the vape band to fine tune it for me.
6. Nice looking tank.
First thoughts are similar to Marc's:
1. Machining is very good. Above average for authentics in a similar price range.
2. I smelled some machine oil so thoroughly washed it, but I do with everything.
3. Post holes were very sharp and cut through 26g like a hot knife through butter.
4. Wicks like crazy. Have a 0.5 ohm build and ran it up to 50W and no issues. I'm sure I could have gone higher on this build, but I'm all about the flavor.
5. Unbelievably airy, lol! I may block off two holes on the vape band to fine tune it for me.
6. Nice looking tank.
So I bought a backup deck I was going to use for Ti but I threw a second Kanthal build, dual 27ga 9 wraps on a 3mm @ .81Ω. I'm vaping it at 24.8 watts and it's producing a ton of vapor and flavor. This inexpensive little atty wicks great. I have the band covering about 3/4 of each hole and it's a real nice vape.
I popped the top for you Super K. It's a pretty simple dual like I build in my Brass Monkee and it works real well. Although the deck is a bit smaller but it wicks great.
My build isn't anything to write home about, but if you really want to see it, I'll post it tomorrow night. I need to shower and eat. I have an early morning with an out of town dr appt tomorrow.
26g duals, 2.5mm, 8 wraps, 0.51ohms.
26g duals, 2.5mm, 8 wraps, 0.51ohms.
July 21, 2015 11:06 AM Shipment Shipped
Woo Hoo!
Apparently mine shipped out DHL. Kind of bummed about that because I don't want a hassle with it's delivery.
Woo Hoo!
Apparently mine shipped out DHL. Kind of bummed about that because I don't want a hassle with it's delivery.
Mine shipped too! DHL is awful here. I always have to go get it. My Goliath v2 shipped via DHL and the tracking info said they needed me to call because they couldn't find my house (I live 10 mins from DHL). I got in my car 5 mins later and the package was there at the facility, meaning they didn't even attempt to deliver it. Ugh.July 21, 2015 11:06 AM Shipment Shipped
Woo Hoo!
Apparently mine shipped out DHL. Kind of bummed about that because I don't want a hassle with it's delivery.
DHL will leave it at your door if you leave a signed note for them with the tracking number.
I just put a different drip tip on, and now I'm very happy. Flavor really increased.
I just put a different drip tip on, and now I'm very happy. Flavor really increased.
Could the owners please comment on the leaking of the Aromamizer RDTA? The deck design seems to be prone to leaking. Thanks!
Mods: eVic VT / Cloupor Mini
Attys: PhenomenoN Light / PhenomenoN Zest / Lemo 2 / Lemo Drop / Lemo / Aromamizer / Magma
Mods: eVic VT / Cloupor Mini
Attys: PhenomenoN Light / PhenomenoN Zest / Lemo 2 / Lemo Drop / Lemo / Aromamizer / Magma
Last edited:
That's what I said, lol! Then I decided 6ml because you don't have to fill it all the way if you don't want to, but you have the capacity if you will be gone all day. And dual coil attys drink juice pretty fast. My Epoch d1 is only 2.5ml, and I fill it a lot.
I haven't even had it a day, but I don't think it will be prone to leaking. The only atty I have that leaks is my first Focloud due to the deck not screwing in all the way, but Focusecig replaced it for me.
- Status
