Aromamizer RDTA by Steam Crave

Status
Not open for further replies.

subohmboy

Senior Member
Sep 19, 2015
89
143
44
Las Vegas
I've had mine for a month or two and I can't seem to get this metallic taste to go away. Anyone else have this problem?


Sent from my iPhone using Tapatalk
Yes. I've had an awful taste coming from mine that hasn't gone away with two washes and three wickings. I'm bathing mine in vodka then boiling water and gonna try it again, but I'm fairly upset since it has such rave reviews.


Sent from my iPhone using Tapatalk
 

jbok

Super Member
ECF Veteran
Verified Member
Oct 27, 2014
468
412
Virginia
No problem. It was really bad at first, a lot of machine oil in it

Sent from my Nexus 6 using Tapatalk
Yeah I gave mine a light rinse when I got it cause there was not any real noticeable oil, but dang I it tastes nasty. I ordered the velocity deck to see if that would make a difference, but to know avail.


Sent from my iPhone using Tapatalk
 

roxynoodle

Unregistered Supplier
ECF Veteran
Jun 19, 2014
15,344
37,213
Ohio
Well, I think I'm psyching myself up to do a quad vertical build today. I'm still not thrilled with the flavor from the aromamizer, which sucks because I love everything else about using it, so I figure it's time to go big and see what happens.

I know there were pictures of a quad vertical build in this thread, but I can't find them again for some reason. Anyone have pictures of their quad vertical build? I'm particularly interested in looking at the coil position and wicking.

Sorry for the bad pic. I have to rewick later today, and will take more then, but its going to be a few hours.

 

JimScotty0

Super Member
ECF Veteran
Verified Member
Feb 10, 2014
961
1,258
Garden Grove, CA, USA
www.facebook.com
I've had mine for a month or two and I can't seem to get this metallic taste to go away. Anyone else have this problem?


Sent from my iPhone using Tapatalk
No not even in the slightest but I did give it an ultrasonic bath when I first got it like I do to all new attys. But this atty was very clean out of the box.
 

JimScotty0

Super Member
ECF Veteran
Verified Member
Feb 10, 2014
961
1,258
Garden Grove, CA, USA
www.facebook.com
My air holes just about passed up the coil so I took that o-ring off the base and replaced it with a 20 mm x 1 mm o-ring. All is well now. it has the tiniest black gap at the bottom of the tank section, just about not visible.
I also beveled both side of the four hole in the deck section but not a lot.
Which deck are you using? My unit came with the 2 post deck and the coils line up perfectly when snug and when I place the horizontal coils between the top and bottom holes. I usually only use the 2 hold band and line up with the coils. Maybe I just got lucky or maybe that is just the case with the 2 post Velocity style deck. Not sure.
 

Vapin Dave

Super Member
ECF Veteran
Sep 9, 2015
751
849
42
California
Which deck are you using? My unit came with the 2 post deck and the coils line up perfectly when snug and when I place the horizontal coils between the top and bottom holes. I usually only use the 2 hold band and line up with the coils. Maybe I just got lucky or maybe that is just the case with the 2 post Velocity style deck. Not sure.
whats your serial #? I haven't seen one person on this thread say their airholes lined up. Maybe you got a new batch?
 

JimScotty0

Super Member
ECF Veteran
Verified Member
Feb 10, 2014
961
1,258
Garden Grove, CA, USA
www.facebook.com
whats your serial #? I haven't seen one person on this thread say their airholes lined up. Maybe you got a new batch?
Mine came with the Velocity deck inside the tank. No 3 post deck inside the box and it was all sealed.
[HASHTAG]#007123[/HASHTAG]
 
  • Like
Reactions: Vapin Dave

Vapin Dave

Super Member
ECF Veteran
Sep 9, 2015
751
849
42
California
Wow, mine is 3614. I ordered mine though, right when the Rip Trippers mania was hitting, so I think they just found an old one around the warehouse and sent it LOL. Right after I got mine they went on backorder.
Maybe I will have better luck on the one I just ordered from eciggity.
Mine also came with the 3 post installed, and the velocity deck was in a little tiny box by its self.

Did you buy yours from eciggity?
 

JimScotty0

Super Member
ECF Veteran
Verified Member
Feb 10, 2014
961
1,258
Garden Grove, CA, USA
www.facebook.com
Wow, mine is 3614. I ordered mine though, right when the Rip Trippers mania was hitting, so I think they just found an old one around the warehouse and sent it LOL. Right after I got mine they went on backorder.
Maybe I will have better luck on the one I just ordered from eciggity.
Mine also came with the 3 post installed, and the velocity deck was in a little tiny box by its self.

Did you buy yours from eciggity?
No from an eBay seller on 9/26/15. http://www.ebay.com/itm/171948418143
 
  • Like
Reactions: Vapin Dave

Vapin Dave

Super Member
ECF Veteran
Sep 9, 2015
751
849
42
California
3 of mine have 2 airholes right bang in the center, and 2 right in front of the neg posts. And one (with a damaged o ring on the base) has the airholes crossing the deck in perfect diagonals. That one is perfect for the quad verticals for a very airy vape.
You have 4?! Thats crazy talk :)
 
  • Like
Reactions: roxynoodle
Status
Not open for further replies.

Users who are viewing this thread