I really like that! I really like the "Made in the USA" sticker on the back, too. I think it would be too big for my hands though. It looks huge!
"Atlanta" Beta Feedback Thread
- Thread starter Kent Brooks
- Start date
- th_trl_thread_readers 0
- Status
I really like that! I really like the "Made in the USA" sticker on the back, too. I think it would be too big for my hands though. It looks huge!
Magma, twin 10 wrap, 29g, 2mm coils, right at 0.9, rayon wick, middle air holes . . .
My first taste after opening the bottles a couple weeks ago, shaking occasionally, I've had them for about a month.
Yeah, this juice is gonna make it. I wondered how the peach and tobacco would be together, one of those combinations that doesn't pop into your head when you think of "things I used to like with tobacco," but it is quite good. The peach isn't overpowering (at least not after the steep, didn't try it earlier), not too sweet, just very nice, and the NET compliments it quite well. I'll tinker with air and W's once I know the wick is settled in, and put it in a tank (Aqua V2) later this week to try an ADV with it.
It is quite good already and I bet it gets better.
Clark, you s'perimenting with all these tobacco vapes just in case the FDA declares bakeries, fruits, colas, and candies to be bad for the children?
My first taste after opening the bottles a couple weeks ago, shaking occasionally, I've had them for about a month.
Yeah, this juice is gonna make it. I wondered how the peach and tobacco would be together, one of those combinations that doesn't pop into your head when you think of "things I used to like with tobacco," but it is quite good. The peach isn't overpowering (at least not after the steep, didn't try it earlier), not too sweet, just very nice, and the NET compliments it quite well. I'll tinker with air and W's once I know the wick is settled in, and put it in a tank (Aqua V2) later this week to try an ADV with it.
It is quite good already and I bet it gets better.
Clark, you s'perimenting with all these tobacco vapes just in case the FDA declares bakeries, fruits, colas, and candies to be bad for the children?
We could have a very interesting conversation about how the FDA is going to attack the vaping issue - but at present, it doesn't look like ANYTHING is going to happen if the (R) take the presidency. Worry of we elect another (D).
Well actually it is supposed to be the smallest 26650 box mod on the market.
It really isn't that big, well in comparison to a Reo, ah yeah it's pretty big...LOL
For myself, being 6'4" 220lbs., ah nah...it's perfect!
I just thought I would pass this along:
It had been brought up earlier in this thread regarding the "gunk" that builds up on coils due to the NET in Atlanta....
I want to add that since I have re-wicked with the Ready X Wick and using cotton for my fluid absorber as I noted in my last review post, my RDA has been a lot easier to clean when the taste starts to degrade.
I say this because I am fully aware that if wicking a RDA with cotton, it is quite the PITA to get the cotton out of the coils without damaging them once gunked up from Atlanta.
This morning before work I took my cotton out, and dry burned my coils and of course scrapped off the crud, dry burned again, then re-packed the cotton, all in about 5 minutes I was back up dripping and vaping to my hearts content!
The RXW made this possible as I did not have to re-wick, and naturally the dry burning cleaned any of the gunk off of the RXW as well as the coils...
Seems to be the way to go, at least for me anyway....
Jus' saying....Ready X Wick through the coils and cotton packed in the atty is a whole lot easier to work with....
Of course this affects RDA' primarily...
RTA', Clearos, well that's yet another topic...
IMHO
It had been brought up earlier in this thread regarding the "gunk" that builds up on coils due to the NET in Atlanta....
I want to add that since I have re-wicked with the Ready X Wick and using cotton for my fluid absorber as I noted in my last review post, my RDA has been a lot easier to clean when the taste starts to degrade.
I say this because I am fully aware that if wicking a RDA with cotton, it is quite the PITA to get the cotton out of the coils without damaging them once gunked up from Atlanta.
This morning before work I took my cotton out, and dry burned my coils and of course scrapped off the crud, dry burned again, then re-packed the cotton, all in about 5 minutes I was back up dripping and vaping to my hearts content!
The RXW made this possible as I did not have to re-wick, and naturally the dry burning cleaned any of the gunk off of the RXW as well as the coils...
Seems to be the way to go, at least for me anyway....
Jus' saying....Ready X Wick through the coils and cotton packed in the atty is a whole lot easier to work with....
Of course this affects RDA' primarily...
RTA', Clearos, well that's yet another topic...
IMHO
Last edited:
I just thought I would pass this along:
It had been brought up earlier in this thread regarding the "gunk" that builds up on coils due to the NET in Atlanta....
I want to add that since I have re-wicked with the Ready X Wick and using cotton for my fluid absorber as I noted in my last review post, my RDA has been a lot easier to clean when the taste starts to degrade.
I say this because I am fully aware that if wicking a RDA with cotton, it is quite the PITA to get the cotton out of the coils without damaging them once gunked up from Atlanta.
This morning before work I took my cotton out, and dry burned my coils and of course scrapped off the crud, dry burned again, then re-packed the cotton, all in about 5 minutes I was back up dripping and vaping to my hearts content!
The RXW made this possible as I did not have to re-wick, and naturally the dry burning cleaned any of the gunk off of the RXW as well as the coils...
Seems to be the way to go, at least for me anyway....
Jus' saying....Ready X Wick through the coils and cotton packed in the atty is a whole lot easier to work with....
Of course this affects RDA' primarily...
RTA', Clearos, well that's yet another topic...
IMHO
If you are damaging your coils when removing the cotton then you probably are using too much cotton.
or
You haven't vaped the crud outta Atlanta on your build ....
It gunks up pretty darn good my friend
I dunno, It. Sounds like you have a wad of cotton packed in there...
I vape some cruddy stuff, NET's, sugary carmel custard stuff ( at .4 ohs and so...) and I've never had an issue deforming mah coils, micro's, uglies, twisted etc...10 watts to 50 watts. I respectfully disagree with you on this one...Try lightening up a bit on your wick. You'll get the same flow of juice, I promise
I dunno, It. Sounds like you have a wad of cotton packed in there...
I vape some cruddy stuff, NET's, sugary carmel custard stuff ( at .4 ohs and so...) and I've never had an issue deforming mah coils, micro's, uglies, twisted etc...10 watts to 50 watts. I respectfully disagree with you on this one...Try lightening up a bit on your wick. You'll get the same flow of juice, I promise
We agree to disagree, which is not to say we dislike each other...
or
I was mistaken, you are wrong and I am right or is that left?
Ah heck you can't get there from here!
See you don't know me very well; I have been doing this (vaping and building) for many a year, I am a card carrying member of OFV!
(Old Fart Vapers)...LOL
Nah..really I vape like a freight train, and I am not the only person mentioning the crud build up from Atlanta; I was merely mentioning that as in my case I vaped the same build soooo long it really caked the crud up on my coils to where it was a bit difficult removing the wick part of the build as the crud was baked on the coils..NOT burnt, kind of like a dark sugar glaze if you will.
I usually wick with RXW because it wicks better and you cannot burn it up, but many do not use it, for one reason cost! The stuff is $8.00 a foot!
Not to mention it cannot be shipped outside of the U.S. due to a few factors, like it uses the same technology as the heat shields on ICBM', and the Space Shuttle.
(For real, I am not making this up)!
See I am old and lazy
so I use what is easiest...I have not been able to destroy this stuff yet!I have vaped a lot of sugary stuff as well, it just seemed a bit of a chore cleaning my neglected parallel build.
(It was probably my fault is was sooo hard to clean). dang did I admit fault
Nicoticket Atlanta
Aspire will be releasing a new 5ml tank for the Atlantis on January 15th!
The factory supplied tank is only 2ml, and to answer the call Aspire has stepped up and made a larger tank.
You can get it direct from Aspire here!
Use the this code at checkout to save $5.00!
lucky5b3cc1
For a bit over $10.00 you can now have a 5ml Atlantis tank!
The factory supplied tank is only 2ml, and to answer the call Aspire has stepped up and made a larger tank.
You can get it direct from Aspire here!
Use the this code at checkout to save $5.00!
lucky5b3cc1
For a bit over $10.00 you can now have a 5ml Atlantis tank!
Thread jack where do you get your rayon? I was gifted what I have and I need to replenish my supply!
We agree to disagree, which is not to say we dislike each other...
or
I was mistaken, you are wrong and I am right or is that left?
Ah heck you can't get there from here!
See you don't know me very well; I have been doing this (vaping and building) for many a year, I am a card carrying member of OFV!
(Old Fart Vapers)...LOL
Nah..really I vape like a freight train, and I am not the only person mentioning the crud build up from Atlanta; I was merely mentioning that as in my case I vaped the same build soooo long it really caked the crud up on my coils to where it was a bit difficult removing the wick part of the build as the crud was baked on the coils..NOT burnt, kind of like a dark sugar glaze if you will.
I usually wick with RXW because it wicks better and you cannot burn it up, but many do not use it, for one reason cost! The stuff is $8.00 a foot!
Not to mention it cannot be shipped outside of the U.S. due to a few factors, like it uses the same technology as the heat shields on ICBM', and the Space Shuttle.
(For real, I am not making this up)!
See I am old and lazy
I have vaped a lot of sugary stuff as well, it just seemed a bit of a chore cleaning my neglected parallel build.
(It was probably my fault is was sooo hard to clean). dang did I admit fault
Nicoticket Atlanta
Well thanks for gettin' off ALL the info after I posted...now it makes sense.
We agree to disagree, which is not to say we dislike each other...
or
I was mistaken, you are wrong and I am right or is that left?
Ah heck you can't get there from here!
See you don't know me very well; I have been doing this (vaping and building) for many a year, I am a card carrying member of OFV!
(Old Fart Vapers)...LOL
Nah..really I vape like a freight train, and I am not the only person mentioning the crud build up from Atlanta; I was merely mentioning that as in my case I vaped the same build soooo long it really caked the crud up on my coils to where it was a bit difficult removing the wick part of the build as the crud was baked on the coils..NOT burnt, kind of like a dark sugar glaze if you will.
I usually wick with RXW because it wicks better and you cannot burn it up, but many do not use it, for one reason cost! The stuff is $8.00 a foot!
Not to mention it cannot be shipped outside of the U.S. due to a few factors, like it uses the same technology as the heat shields on ICBM', and the Space Shuttle.
(For real, I am not making this up)!
See I am old and lazy
I have vaped a lot of sugary stuff as well, it just seemed a bit of a chore cleaning my neglected parallel build.
(It was probably my fault is was sooo hard to clean). dang did I admit fault
Nicoticket Atlanta
OFV, I like that. Where can I get my card?
The old Virus (H1N1) was like that and GCD can be. I was having to dry burn my coil/RxW with each tank fill.
Speaking of OFV, I still have some old Joye 510 pen style batteries, carts loaded with the blue foam and unvapable juice of the time.
All NETs have more gunk then a standard juice will. I have vaped NETs from many vendors, vaping Dutch Cocoa Tobacco for TPR now, and after 3-5mls ran through my drippers I see some kind of gunk forming. River Bottom has been the worst in my experience.
All NETs have more gunk then a standard juice will. I have vaped NETs from many vendors, vaping Dutch Cocoa Tobacco for TPR now, and after 3-5mls ran through my drippers I see some kind of gunk forming. River Bottom has been the worst in my experience.
It's because NET' have tobacco particulate in them, that leaves a residue when burnt (not saying we are burning them).
It's that moment when the coils get real hot right before we release the trigger.
If you take most e-liquids and let say put a teaspoon of it in a pan and heat it until it vaporizes until gone, there is very little residue if any left in the pan, if on the other hand you do this with a e-liquid with NET' in it, there is definitely a residue left behind, which is the tobacco particulate.
Not a big deal, but it makes for a bit more work for us lazy old folks...LOL
We aren't lazy, we are efficient. We learned that being we wasted a lot of energy when we were younger that we want to conserve what we have left!
- Status
Similar threads
