The "tirbouson" method works great till now.
Στην υγειά σας my fellow Divers
Στην υγειά σας my fellow Divers
Atmistique Atomizers
- Thread starter billakosgr
- Start date
- th_trl_thread_readers 0
- Status
1. Flange Dia = 10mm
2. Flange Depth = 1.2mm
3. Top of flange to top of diver = 36mm
Flange tapers on the top. that's why I got 1.2mm
Without the taper, it's 1mm
I hope that helps
In case you haven't figured out why I need these measurements, I asked Phiniac.com if they could make a bottom cap that would recess the flange on the diver and they have expanded on that idea to make a pyrex tank that is tall enough so the diver doesn't stick out of the top cap. Since most of my tanks are Phiniac's they seemed the perfect people to do something like this. I hope they can do it.
I figured it's what you're going to do by the sig you have
I saw diver at Phiniac last week
So they might have measurements too
Last edited:
Nice TM.
1/2 of your battle is solved by the SnP tank by GP http://www.vapourart.com/en/ (site is down to upgrade servers)
as they have the recessed bottom through the use of ss caps that screw over the top and bottom. The diver barely protrudes the top though. I love me a Phiniac though! Keep us posted of the response. Fingers crossed.
Maybe you saw this, my SnP with diver
On another note...I found divers available last night from a site in Malaysia. Think I'll wait
No they don't but you could email them to see if they would cut one to your specs. They are pretty accommodating.
I figured it's what you're going to do by the sig you have
I saw diver at Phiniac last week
So they might have measurements too
Really, I didn't think they had them in yet.
Nice TM.
1/2 of your battle is solved by the SnP tank by GP http://www.vapourart.com/en/ (site is down to upgrade servers)
as they have the recessed bottom through the use of ss caps that screw over the top and bottom. The diver barely protrudes the top though. I love me a Phiniac though! Keep us posted of the response. Fingers crossed.
Maybe you saw this, my SnP with diver
On another note...I found divers available last night from a site in Malaysia. Think I'll wait
I'll wait too. Got big atmistique list
And I want a 23mm SnP now
I have the 22mm but that pic makes me want to get 23mm
So, bought the SnP tank from GP and they provided a diver...it worked nicely after a bit of leakage for the first day but now it pours juice out as fast or as slow as I fill it. I wish I vaped cheap juice right now.
I broke down the diver and found where the ceramic sits in the base of the diver the delrin inside is chewed a bit from the top of it to the bottom. I am not sure how this could even happen. Shti.
If this will not affect my leaking issue than I dont care as long as the diver works.
My set up is a normal one .30 ga 4 wraps 1.2ish ohms with 1.5 ekowool wick cut to base.
What now. Help Konstantinos, please.
I broke down the diver and found where the ceramic sits in the base of the diver the delrin inside is chewed a bit from the top of it to the bottom. I am not sure how this could even happen. Shti.
If this will not affect my leaking issue than I dont care as long as the diver works.
My set up is a normal one .30 ga 4 wraps 1.2ish ohms with 1.5 ekowool wick cut to base.
What now. Help Konstantinos, please.
Your right TM, they have had no stock as of yet. I too have been watching
I just heard that the Diver specs have changed. Can anybody provide any info on this?
Murphy's law they'd change measurements. (I got 35.8mm from top of flange to top of diver, 37mm total).
Last edited:
How ironic as, I hope to get the 22mm early next week.I'll wait too. Got big atmistique list
And I want a 23mm SnP now
I have the 22mm but that pic makes me want to get 23mm
Just so there is no confusion, I am an idiot. I figured out why the delrin insert is cut and it was my fault.
Konstantnios, do you supply these? Shouldn't be a big deal and I don't think it's the cause of the massive leak.
Thank you.
Idahobro - the pic you posted make me want to get the 23mm
On a Diver note, most of the leak issue I had was due to refilling the tank
On a Diver note, most of the leak issue I had was due to refilling the tank
Idahobro - the pic you posted make me want to get the 23mm
On a Diver note, most of the leak issue I had was due to refilling the tank
The SnP/23 really looks awesome!
@Idaholandho: Just make sure that the ceramic firmly sit in the insulator. Note that no leakage resulting from plastic. Pls tell me what non res wire u use?
Remember me in your next order to put u a pair of them.
@tmc: we don’t change Divers specs except the height of the tube. From the last batch we make it a little bit shorter 0.8mm.
Remember me in your next order to put u a pair of them.
@tmc: we don’t change Divers specs except the height of the tube. From the last batch we make it a little bit shorter 0.8mm.
Thanks for the video, Konstantinos, and a big "Thank You" to the ECF contributors for sharing this method. 
This should make for many Happy Divers.
Happy Diving, everyone.
- Andy
This should make for many Happy Divers.
Happy Diving, everyone.
- Andy
Konstantinos post!!
I am using Ni and now moving to Ag from now on for my Diver builds. As, it is more pliable and easier for me to work with.
Thank you.
Placing order soon!
- Status
Similar threads
- Locked
