Atmistique Atomizers

[mikeulon]

I tape the second hole on dual coil dripper caps I'm not sure I didn't try this sooner

 

[Wmmeese]

Konstantinos. I am having trouble logging on to your site. I want to buy a BB Bridge for my Billet Box. I have tried the password reset twice, but the token from my email doesn't work.

 

[Konstantinos]

Pls email me to info@atmistique.gr

 

[Wmmeese]

Pls email me to info@atmistique.gr

Email sent.

 

[Konstantinos]

...and answered

 

[mrpumuki]

Thank you Konstantinos and Makis for my super fast package. I'll try the juice ASAP. Take care guys.

 

[Konstantinos]

Enjoy your goodies there

 

[mrpumuki]

Love the new O rings.

 

[tmcase]

Whoa! This thread seems to have died.

I just made a trade for the Diver V2. The one that has the funny name that starts with an "E". I set it up and got it working on the first try. I've only been using it for a couple of hours but so far no flooding or dry hits. YAY! This was a hell of a lot easier to assemble than the V1. I'm curious though about the pics with 2 orings on the pin. Mine has one. Why are there 2 in that pic above?

Also, all my premade wires are nr-r-nr so I cut off one end of the nr wire. Is this necessary? I figured that it wouldn't work with nr wire in the ceramic cup post hole where the pin goes in. Am I correct about that?

 

[mrpumuki]

Whoa! This thread seems to have died.

I just made a trade for the Diver V2. The one that has the funny name that starts with an "E". I set it up and got it working on the first try. I've only been using it for a couple of hours but so far no flooding or dry hits. YAY! This was a hell of a lot easier to assemble than the V1. I'm curious though about the pics with 2 orings on the pin. Mine has one. Why are there 2 in that pic above?

Also, all my premade wires are nr-r-nr so I cut off one end of the nr wire. Is this necessary? I figured that it wouldn't work with nr wire in the ceramic cup post hole where the pin goes in. Am I correct about that?

The two O rings comes stock when you buy it. If one is missing its maybe because he lost it.
You shouldn't have to cut the NR wire. The idea is that the R wire makes the warps around the wick and the two NR go down the ceramic cup to make to positive and negative contact.

 

[tmcase]

The two O rings comes stock when you buy it. If one is missing its maybe because he lost it.
You shouldn't have to cut the NR wire. The idea is that the R wire makes the warps around the wick and the two NR go down the ceramic cup to make to positive and negative contact.

I don't seem to need that second oring so it's no big deal but thanks for the info. I guess I don't need it.

Cool about the NR wire. That will give me more to work with. I ended up the the correct ohms without that NR wire but I'd rather leave it there.

 

[mrpumuki]

The ohm output has nothing to do with the NR. It's all up to the amount of R you're using e.g. 4.4cm of .20mm A1 kanthal will come out at approximately 2 ohm regardless of how many wraps you make. Hope this helps

 

[Konstantinos]

tmcase: as mrpumuki correct note you definitely need both edge of nr wire for the reasons he explained. Also the second o-ring is for better sealing

Hope you enjoy your new Diver

 

[mrpumuki]

@konstantinos when do we get a gold edition base for the diver v2 I need a 6th one I don't like odd numbers

 

[Kataphraktos]

@konstantinos when do we get a gold edition base for the diver v2 I need a 6th one I don't like odd numbers

I don't believe there is a gold base, only the top tube. I have a full gold Scuba Diver + gold Twins and Hippo, the only piece that is SS is the base - which is conveniently hidden by a gold Scuba lower ring.

 

[mrpumuki]

Hi Kat, nice to read you . I know I already have to top part. Just wanted to know if they were going to make a base part one day

 

[Kataphraktos]

I don't seem to need that second oring so it's no big deal but thanks for the info. I guess I don't need it.

Cool about the NR wire. That will give me more to work with. I ended up the the correct ohms without that NR wire but I'd rather leave it there.

Should work with one o-ring, but you know whom to PM if you want more... I don't have the blue ones, though, so you will be stuck in Uncool Cat Territory with me if you get my pedestrian black o-rings.

 

[Kataphraktos]

Hi Kat, nice to read you . I know I already have to top part. Just wanted to know if they were going to make a base part one day

I suspect the gold plate would not last long on the base, which is why it wasn't released in gold plate.

 

[Kataphraktos]

I don't seem to need that second oring so it's no big deal but thanks for the info. I guess I don't need it.

Cool about the NR wire. That will give me more to work with. I ended up the the correct ohms without that NR wire but I'd rather leave it there.

The NR leads on any ready wire will definitely be too long, and they will need to be trimmed down. The ready wires I have probably lose about 80% of their length when trimmed down. Are the NR leads too wide gauge to go through the holes? I have a LOT of ready wires I will never use, I can send you a pack so you can compare, if you tell me which resistance you prefer.

 

[finagle69]

The NR leads on any ready wire will definitely be too long, and they will need to be trimmed down. The ready wires I have probably lose about 80% of their length when trimmed down. Are the NR leads too wide gauge to go through the holes? I have a LOT of ready wires I will never use, I can send you a pack so you can compare, if you tell me which resistance you prefer.

I think you are the nicest person on the whole internet.