Attack of the (Kayfun Mini V3) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
When I get mine, I'll probably use 28 gauge Kanthal, 8-9 wraps at 2 mm. Should be around 1.5 ohms which is where I vape now.
Bruce in Ocala, Fl[/QUOTE]
I have tried 27, 28, and twisted 30 gauges. My black one has a simple twisted 30ga 8wraps 2.4mm at 1.45ohms. I had almost always used 3mmcoils in others but this smaller atty seems to like a smaller coil. But I feel the wicking is trickier getting just right with small size- never tried as small as 2mm isnt that a tiny little thread of cotton?
Bruce in Ocala, Fl[/QUOTE]
I have tried 27, 28, and twisted 30 gauges. My black one has a simple twisted 30ga 8wraps 2.4mm at 1.45ohms. I had almost always used 3mmcoils in others but this smaller atty seems to like a smaller coil. But I feel the wicking is trickier getting just right with small size- never tried as small as 2mm isnt that a tiny little thread of cotton?
Yeah i like as many wraps as I can get, so that the coil is just a bit wider than the air hole shaft- and then if needed ill change my wattage setting or use diff gauge wire to get where I need to be. So are u using contact squeezed together type coils or spaced out wraps? Have u noticed any/much difference?
Cool, i must try that for sure then, soon! I know in my very beginning of building i did some like that, but once ifinally got a good one going with contact microcoil i just never tried changing that part of it.
I vape only Tobacco flavors. I just can't enjoy anything else. I've tried hundreds of different ones from tobacco to cake and candy and I keep going back to the 2 tobacco ones I've been using for 5 years.
To the guy who asked me, I don't know much about them, but been hearing from a lot of people that they really like the flavor they get on the hurricane tank.. At least the authentic tank.. But i notice they have a clone.
One is from Vaporkings.com called Red and White and the other from NewleafVapor.com called Carolina. Been using them forever.
Maybe I'll give em a whirl. I'm basically a tobacco only vaper as well.
Sent from my SM-N920V using Tapatalk
Ordered both. Also got a Virginia Tobacco from New Leaf as well. Just for the heck of it.
Sent from my SM-N920V using Tapatalk
I found a space coil to work better in the KFMV3, my wife was getting a few dry hits when 1st built it with a micro coil, so took out the micro and did a spaced, and she loves that, so I will go with spaced in the KF's from now on
What's the ID of your coils?I found a space coil to work better in the KFMV3, my wife was getting a few dry hits when 1st built it with a micro coil, so took out the micro and did a spaced, and she loves that, so I will go with spaced in the KF's from now on
I found more wick (rayon) works better. I'm using 3mm ID, spaced 28g Ni200, .10Ω. I built my sister's KM3 with a 1.3Ω, 3mm ID, 28g Kanthal micro coil stuffed with rayon and it works great.
What I noticed is that you need to leave at least one of the juice holes clear of wick and the side slots shouldn't be blocked by the wick. I've been trying some really thick juice (80/20?) and I haven't had a dry hit yet, even while chain vaping it.
Using 2.5mm in hers, that is normal ID I use on all my coils.
Also with micro coil I used cotton, with spaced I used rayon, so that could be the difference too.
For me, the Amount of wick is easier with Rayon. As much as you can cram through the coil.
Bruce in Ocala, Fl-Oh and having been PIFd a nice pile of Rayon helps too
Bruce in Ocala, Fl-Oh and having been PIFd a nice pile of Rayon helps too
- Status
