Attack of the (Kayfun Mini V3) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
Just tested the airflow of the kfmv3 against my erlprinz and erlkonigin.
From most restricted to open:
Erlkonigin
Kfmv3
Erlprinz
Note that both erls had the airflow nut removed and the kfmv3 has its grub screw as open as possible.
Enviado do meu GT-I9195 através de Tapatalk
From most restricted to open:
Erlkonigin
Kfmv3
Erlprinz
Note that both erls had the airflow nut removed and the kfmv3 has its grub screw as open as possible.
Enviado do meu GT-I9195 através de Tapatalk
Just tried it on the "SS316" pre-set on an Evic VTC Mini with firmware 3.01 and the thing hits like an istick 20w with its mean (vs RMS) power calculation (i.e. "hard"). The first hit shocked the hell outta me. I'm using 6 mg liquid, but the throat hit feels more like 9-12 mg.
I may leave it there. Lol.
I may leave it there. Lol.
It's red. The DNA30 has a 1200mah lipo (round, single cell). The DNA40 has a 18650 soldered in, the rDNA40 has a removeable 18650 with a magnetic door and the DNA200 has a 900mah 3s lipo.
Is that 900mah total? Or each of the cells totaling 2700?
Sent from my SM-N920V using Tapatalk
In series. Each cell has 950mah but it's still 950mah total. The difference is the voltage. 11.1V instead of 3.7V
In the end, what counts are the Watts/hour.
EDIT: sorry, I just realized the post was directed at KTM
Enviado do meu GT-I9195 através de Tapatalk
In the end, what counts are the Watts/hour.
EDIT: sorry, I just realized the post was directed at KTM
Enviado do meu GT-I9195 através de Tapatalk
Red, orange, brownish.....all about the same to me as I've got protanomaly a form of 'color blindness' in common terminology. Even tho I cant easily distinguish them I do like. Do you have any issues with the non-removable batteries or not so much? They sure are slick lookin little devices
I am again thinking about buying a Kayfun Mini V3 clone.
I am also thinking that there are more than one manufacturer of these Chinese clones, in that some of them may be better than others.
Have we determined who is selling the best of these clones yet?
If someone could provide a link to the Kayfun Mini V3 that folks here have had the best luck with, I would be much appreciative.
Thanks,
I am also thinking that there are more than one manufacturer of these Chinese clones, in that some of them may be better than others.
Have we determined who is selling the best of these clones yet?
If someone could provide a link to the Kayfun Mini V3 that folks here have had the best luck with, I would be much appreciative.
Thanks,
I am sure there are about 5 different answers to this question. This is the one I got from FT and it is perfect.
I removed the AFC grub screw totally. No leaks, no shorts, nothing but smooth vape.
$13.58 Kayfun Mini V3 Styled RTA Rebuildable Tank Atomizer - 2ml / 316 stainless steel + glass at FastTech - Worldwide Free Shipping
I removed the AFC grub screw totally. No leaks, no shorts, nothing but smooth vape.
$13.58 Kayfun Mini V3 Styled RTA Rebuildable Tank Atomizer - 2ml / 316 stainless steel + glass at FastTech - Worldwide Free Shipping
DP2 ....
Thanks for the link. I was looking at the same link before ... What's a little confusing is that Fasttech sells more than one of these clones, so it's difficult to figure out which one to order.
I see the 3F also sells one. I notice that the 3F version has the logo engraved in the chimney:
Kayfun Mini V3 Silver 2mL 19mm RTA Rebuildable Tank Atomizer
... Too bad these clones only hold 2.0 ml of juice. I would have thought that a 19mm diameter atty. would hold slightly more than that ... oh well
Thanks for the link. I was looking at the same link before ... What's a little confusing is that Fasttech sells more than one of these clones, so it's difficult to figure out which one to order.
I see the 3F also sells one. I notice that the 3F version has the logo engraved in the chimney:
Kayfun Mini V3 Silver 2mL 19mm RTA Rebuildable Tank Atomizer
... Too bad these clones only hold 2.0 ml of juice. I would have thought that a 19mm diameter atty. would hold slightly more than that ... oh well
FitSim, I know they sell multiple versions...I'm just saying the one I got was perfect. I have no advice on the others. I'm sure some of the other people in this thread have their faves to. All I know is the one I sent a link to is very good. In every way. Except the 2ml tank limitations.
I want the Plus. Just waiting to see who sells the best one of those. The 2 3F ones that I have are great. Not a leak, dry hit or any malfunction. Smooth threads too.
I would like to think my Plus from FT will be in this week. 
All the Kayfun mini V3 holds 2ml of juice. Even the authentic.
@KTMRider looks nice and the added capacity would be nice.. I just can't bring myself to try a tank I can't see the juice level in..
You got some early warning system or just from experience of trial and error?
You got some early warning system or just from experience of trial and error?
- Status
