Attack of the (Kayfun V5) Clones!

[magicmyst]

I love the draw. Never did like sucking a thick milkshake through a straw!

 

[dd4285]

Meh.

I've had great luck with Tobeco's (KF4 and KM3) but they take a while to market and not the easiest to find so I just ordered 10 (5 ss, 5 black) direct from them via Alibaba. I don't need 10 but that's the minimum order. I'll probably throw a few on eBay unless I really, really like it.

Let me know when u post it on ebay.. looking forward for the ss.. i have the mini v3 clone, everything is great except its too small for me..

Sent from my Redmi Note 2 using Tapatalk

 

[KTMRider]

Let me know when u post it on ebay.. looking forward for the ss.. i have the mini v3 clone, everything is great except its too small for me..

Sent from my Redmi Note 2 using Tapatalk

I got an email already that it will ship tomorrow and it should take 5-7 days. You might be better off ordering the SXK from FT unless you don't want to wait because these weren't cheap even in bulk. My cost for the Tobeco's are right around $23 ea with shipping and fees.

I have a SXK and the Angelcigs version on order too.

 

[KTMRider]

I love the draw. Never did like sucking a thick milkshake through a straw!

I got used to the looser draw and prefer them now. It took a couple of days/weeks to get used to it when I first started vaping but now it's a much more relaxed vape for me and hate tight draw atomizers. The KF4 and KM3 have about the same airflow with the airscrew wide open.

 

[ka724ka]

I got an email already that it will ship tomorrow and it should take 5-7 days. You might be better off ordering the SXK from FT unless you don't want to wait because these weren't cheap even in bulk. My cost for the Tobeco's are right around $23 ea with shipping and fees.

I have a SXK and the Angelcigs version on order too.

I am interested in getting one too as I had great experience on K4. Kindly let me know when you have it putting on ebay. Thanks!


Sent from my iPad using Tapatalk

 

[Phone Guy]

I am waiting on the focal sxk version..... I hope the draw is much more open than the v4. While the vape was good the draw (to me) seemed restrictive to me.

I recently got the squape x dream and the draw on its great imo. Restrictive lung kind of, more open than the k4. (never had a km3)

I look forward to the kayfun 5.

 

[mtbason35]

I love the draw. Never did like sucking a thick milkshake through a straw!

Cookout milkshake? Couldn't help it, saw that you were from Raleigh over in the authentic thread. I'm only about 45 minutes away from you.

 

[nelsonm64]

I'm so disappointed this isn't a good MTL tank (without the conversion kit). I like a nice tight draw.

if you want a better MTL experience you might want to consider this, I have one and it's my new ADV!

$20.88 Kayfun V3 Plus 1.5 Styled RTA Rebuildable Tank Atomizer - 3.2ml / 316 stainless steel + glass / 22.5mm dia. at FastTech - Worldwide Free Shipping

 

[dd4285]

I got an email already that it will ship tomorrow and it should take 5-7 days. You might be better off ordering the SXK from FT unless you don't want to wait because these weren't cheap even in bulk. My cost for the Tobeco's are right around $23 ea with shipping and fees.

I have a SXK and the Angelcigs version on order too.

I'm not in a hurry for another kayfun.. currently rockin' the mini v3 from fasttech.. never tried a tobecco clone before..

Sent from my Redmi Note 2 using Tapatalk

 

[samsek]

Was keen to try the KF5 but have so much money out this month and last that I will have to postpone until my better half gives me the go ahead!!

I just break down and justify vape purchases with the costs of the old smoking habit. I just say, well its only one day of smoking that this cost me and such lol.

 

[KTMRider]

I'm not in a hurry for another kayfun.. currently rockin' the mini v3 from fasttech.. never tried a tobecco clone before..

Sent from my Redmi Note 2 using Tapatalk

Tobeco has made very good versions of the KF4 and KM3. I like the simplicity of design of the KM3 but capacity is an issue for me. I'm sure the KF5 will address the shortcomings of both KF4 and KM3 (for me).

I just break down and justify vape purchases with the costs of the old smoking habit. I just say, well its only one day of smoking that this cost me and such lol.

I stopped trying. I know that I spend less per year on vaping than I did when smoking. There are times I go a few months w/o spending anything on vaping because I have lots of juice and equipment. With the FDA idiots running amok, I've been on a hoarding spree the last few weeks though. I've added a few DNA75 and DNA200 mods and about 2 liters worth of e-juice. With the 12 KF5's coming in, I don't think I'll be buying any more atomizers but I'll probably add more juice since there's some great deals lately.

 

[Katya]

if you want a better MTL experience you might want to consider this, I have one and it's my new ADV!

$20.88 Kayfun V3 Plus 1.5 Styled RTA Rebuildable Tank Atomizer - 3.2ml / 316 stainless steel + glass / 22.5mm dia. at FastTech - Worldwide Free Shipping

Hi Nelson, do you know if this one comes with a ss center pin?

 

[Katya]

I have had other Coppervape clones and all have been top quality so I figured why not go with past success. I'm glad I did. I can't imagine a higher quality clone.

These were purchased directly through Coppervape/Alibaba but in the past DHgate was the source of my Coppervape clone attys. I don't think DHgate has them listed yet but they likely will pretty soon if their past is a guide.

Hi Druckle! Is it at all possible to get one of those somewhere? DHgate is a wholesaler, too, and I really don't want to buy ten of anything, come to think of it.

 

[samsek]

With the FDA idiots running amok, I've been on a hoarding spree the last few weeks though.

As expected - i would be too if i was in the USA. The only concern i have is that i get my nic from the US, but i got 1.6L 100mg and not sure if i will get some restocked or just see what my options are in two years time.

 

[nelsonm64]

Hi Nelson, do you know if this one comes with a ss center pin?

im not 100% sure. it appears to be silver plated something? probably copper...

 

[juicynoos]

I just say, well its only one day of smoking that this cost me and such lol.

Haha, easier said then done but your theorem is sound LOL

 

[samsek]

Plan B is to give them the total you have saved thus far. When its in the thousands, it kinda sinks in. I get no arguments after that.

 

[magicmyst]

Was keen to try the KF5 but have so much money out this month and last that I will have to postpone until my better half gives me the go ahead!!

I just break down and justify vape purchases with the costs of the old smoking habit. I just say, well its only one day of smoking that this cost me and such lol.

I've gone overboard lately too: Several new ProVari (on sale or special), new batteries, several KMV3 clones, one authentic and an authentic K5. Fortunately, I tend to binge like this then hibernate and stay off these forums for a while. A couple of years ago I got several KFL, figured out a good build and was set, except for purchasing juice. I'm thinking about another K5, but other than that and maybe some spare parts, I should be ready to give it a rest for a while again.

 

[Rudeboy615]

Hi Nelson, do you know if this one comes with a ss center pin?

This is what it says on description:
510 threading connection w/ stainless steel contact

 

[juicynoos]

I tend to binge like this then hibernate and stay off these forums for a while.

Well. we all have a perfectly good explanation with the NECESSITY for stocking up (binge buying) but yeah; going to settle down a bit now and play with all the new toys. So many kayfuns and various other rta's with SS, Kanthal, ni200 I'm going to have to build (buy) an organizer for them all!

Just as soon as I've stocked up on DIY supplies aswell......