Attack of the (Kayfun V5) Clones!

[KTMRider]

That wobble, I wonder why it's happening. Is the 510 pin too long?

It's the tank section that wobbles on the base, not at the 510. Same design as the KM3. It's barely noticeable but some people have mentioned it. I didn't even notice it until someone mentioned it.

The tank wobble and afc play are minimal issues and doesn't affect the vape.

 

[KTMRider]

hmmm, I have the one that's discontinued. I also have a bellus, ill check it out! but you're right, the one that replaced the one I have is a diff diameter apparently? china

I'm ASSuming you guys are talking about the KM3 1.5 and not the KF5?

I wouldn't go by their measurements. They might be measuring from the widest point and not the actual glass.

 

[Katya]

It's the tank section that wobbles on the base, not at the 510. Same design as the KM3. It's barely noticeable but some people have mentioned it. I didn't even notice it until someone mentioned it.

The tank wobble and afc play are minimal issues and doesn't affect the vape.

Thanks. I'm still hoping that one of the clones will come with a smaller air hole than the original. I know that a few KM3 clones have holes 2 mm or smaller (as opposed to SM 2.2 mm).

What's the size of that hole on your Tobecos, BTW? Did you look? Is it maybe smaller than 3.2 mm? How about the version from Angelcigs?

 

[Katya]

I'm ASSuming you guys are talking about the KM3 1.5 and not the KF5?

I wouldn't go by their measurements. They might be measuring from the widest point and not the actual glass.

Yes, we're talking about the new fat(test) KM3 from FT. It went from 22 to 24 mm.

 

[nelsonm64]

my glass is 22mm x 19mm x 1.5 I just put the bachelor nano and bellus glass in mine and they both fit great! mine was listed as 24mm too but, that's at its thickest spot. the base is 22mm. I have one of the other ones with the tapered top bit coming, sure hope I can find a spare glass

this is the one I currently have. I wish they still had them because this thing is spot on! best clone I have owned, virtually perfect...

$18.44 Kayfun Mini V3 Plus Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + glass at FastTech - Worldwide Free Shipping

 

[Katya]

my glass is 22mm x 19mm x 1.5 I just put the bachelor nano and bellus glass in mine and they both fit great! mine was listed as 24mm too but, that's at its thickest spot. the base is 22mm. I have one of the other ones with the tapered top bit coming, sure hope I can find a spare glass

this is the one I currently have. I wish they still had them because this thing is spot on! best clone I have owned, virtually perfect...

$18.44 Kayfun Mini V3 Plus Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + glass at FastTech - Worldwide Free Shipping

I am so confused now... So which one has been discontinued???????

$18.44 Kayfun Mini V3 Plus Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + glass at FastTech - Worldwide Free Shipping

N/M

This conversation belongs in the the KFM3 thread, anyway...

Attack of the (Kayfun Mini V3) Clones!

 

[Magic Of Light]

So much information to process, I was told recently on my thread that a kayfun 3 mini clone would be a good upgrade to my current protank 2 "yes i know im way behind the times". But with the kayfun 5 being out, and all its improvements, im struggling. Is the kf5 really that airy of a draw? For someone who exclusively mtl vapes, would it be better to go the the kf3 plus? That tool i have seen talked about for the kf5 doesnt seem to be out yet, and probably costs and makes it even huger than it already will be lol. Dont mean to hijack, just really trying to make an informed purchase so im not wasting money.

 

[dwcraig1]

I thought I would be receiving my SXK v5 from FT today, almost, but I'll have it tomorrow. It's been awhile since I got excited about getting a Kayfun but excited I am about the v5.

 

[KTMRider]

Thanks. I'm still hoping that one of the clones will come with a smaller air hole than the original. I know that a few KM3 clones have holes 2 mm or smaller (as opposed to SM 2.2 mm).

What's the size of that hole on your Tobecos, BTW? Did you look? Is it maybe smaller than 3.2 mm? How about the version from Angelcigs?

I just opened a new Tobeco to check the size and it is 3.2mm. I don't know about the AC version because it has a build on it and I'm not taking it apart (even for you ) but it vapes the same as the 3 Tobecos I built.

I am so confused now... So which one has been discontinued???????

$18.44 Kayfun Mini V3 Plus Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + glass at FastTech - Worldwide Free Shipping

N/M

This conversation belongs in the the KFM3 thread, anyway...

Attack of the (Kayfun Mini V3) Clones!

Yeah, this discussion belongs in the KM3 thread. Try the authentic thread

So much information to process, I was told recently on my thread that a kayfun 3 mini clone would be a good upgrade to my current protank 2 "yes i know im way behind the times". But with the kayfun 5 being out, and all its improvements, im struggling. Is the kf5 really that airy of a draw? For someone who exclusively mtl vapes, would it be better to go the the kf3 plus? That tool i have seen talked about for the kf5 doesnt seem to be out yet, and probably costs and makes it even huger than it already will be lol. Dont mean to hijack, just really trying to make an informed purchase so im not wasting money.

The KF5 is more airy than the KM3. Both are much more airy than a Protank but you can adjust the airflow on the KM3 to be about the same. The only con is the 2ml capacity. I have 4 KM3 (gave 2 to my sister) and 4 KF5 (7 still NIB). They're both very good atomizers. You can MTL the KF5 but you just need to get used to not sucking so hard (yeah, sounds dirty).

I thought I would be receiving my SXK v5 from FT today, almost, but I'll have it tomorrow. It's been awhile since I got excited about getting a Kayfun but excited I am about the v5.

Other than the loose draw, it's a really great atomizer. I'm really enjoying the 4 I've built. I'm slowly retiring all my KF4's for KF5's now.

 

[Katya]

I just opened a new Tobeco to check the size and it is 3.2mm. I don't know about the AC version because it has a build on it and I'm not taking it apart (even for you ) but it vapes the same as the 3 Tobecos I built.

So the clone makers got this one right? Oh, well.

I'm slowly retiring all my KF4's for KF5's now.

Really????

 

[VapingTurtle]

Yeah, this discussion belongs in the KM3 thread. Try the authentic thread

 

[KTMRider]

So the clone makers got this one right? Oh, well.



Really????

Yep and yep .

I really like the vape from the KF4 but it has design issues. I'm not saying the KF5 is perfect but it's much easier to deal with. The resistance is way more solid, it weighs less and the JC works better and easier. I'm down to 2 KF4's still in rotation though.

 

[Katya]

Yep and yep .

Hmmm....

I really like the vape from the KF4 but it has design issues.

I'm not saying the KF5 is perfect but it's much easier to deal with. The resistance is way more solid, it weighs less and the JC works better and easier. I'm down to 2 KF4's still in rotation though

Another hmmm..........

 

[Phone Guy]

I thought I would be receiving my SXK v5 from FT today, almost, but I'll have it tomorrow. It's been awhile since I got excited about getting a Kayfun but excited I am about the v5.

Man, I wish I would have ordered from FT, focal still hasn't shipped mine yet! From 6/8 I think?

 

[KTMRider]

Man, I wish I would have ordered from FT, focal still hasn't shipped mine yet! From 6/8 I think?

I ordered from FT on 6/3 and it was just shipped a couple of days ago. It was supposed to ship 6/15 but it had 2 delays.

There's a few guys that ordered a day after me and still hasn't shipped.

 

[dwcraig1]

I ordered from FT on 6/3 and it was just shipped a couple of days ago. It was supposed to ship 6/15 but it had 2 delays.

There's a few guys that ordered a day after me and still hasn't shipped.

Mine was ordered on 6-2, must have just missed the first wave.
6 days from acceptance to delivery, SF ISC was where it lagged the most.

 

[Katya]

Do we know anything about this version? Good reviews...

SJMY Kayfun V5 Kayfun 5 Style RTA 22mm 4ml Silver Rebuildable Atomizer

 

[KTMRider]

Do we know anything about this version? Good reviews...

SJMY Kayfun V5 Kayfun 5 Style RTA 22mm 4ml Silver Rebuildable Atomizer

I'm pretty sure someone on this thread got one and liked it.

 

[Phone Guy]

I'm pretty sure someone on this thread got one and liked it.

I think it was steamer

 

[jurdanas]

I write SXK, they answered:
I -I have 1 question. " SXK Kayfun V5 clo...." have logo "SM" and "SXK".
SXK- -Not SM,it is SXK,wh....
SXK- -Kayfun 5 is first one we put our logo
SXK- -Like this? Only the middle is our sxk's

Which is better - I do not know?