Everything is in place,oring's the pin the nylon screw it's something with the wicking I'm sure 80% its not leaking but the draw becomes tight because the juice dripping?
Your tags stick up.Just rewicked View attachment 817465 View attachment 817467 . This is the km3, but exactly the same. I try and keep the deck as clear as possible from wick
I didnt realize that until I took a shot of it, I did snip it off afterYour tags stick up.
I guess I do 50/50 and at least for me, that is about the only difference I see. When doing a micro it's easier to slide in wick and like you said, seems to last more. Also a micro coil may be a tad warmerOne advantage to microcoils is they last. Spaced coils get deformed from wicking so they need changing out more often.
Is your af really tight? Sometimes if the af is closed tight and one has a pretty powerful draw and using a pretty thin juice, that can perhaps flood a tank, so if you think this is a possibility, try opening the af a tad more to see if it could be thatEverything is in place,oring's the pin the nylon screw it's something with the wicking I'm sure 80% its not leaking but the draw becomes tight because the juice dripping?
Well, it could be warmer in power mode but with TC it is all the same.I guess I do 50/50 and at least for me, that is about the only difference I see. When doing a micro it's easier to slide in wick and like you said, seems to last more. Also a micro coil may be a tad warmer
Sent from my SM-G960U using Tapatalk
When I close my af with my finger the draw is ok as you asked me before, it's hard to explain how my af becomes tight but I assume because of juice dripping somehow the only think I can tell you is, if you wick the coil and before close the tank put too much juice the coil overfeeding, I can't explain because of my crappy knowledge to my foreign language sorry.
Tc sounds boringWell, it could be warmer in power mode but with TC it is all the same.
I understand...hopefully some of the info that was given here will help...........what wattage and pg/vg ratio do you use?When I close my af with my finger the draw is ok as you asked me before, it's hard to explain how my af becomes tight but I assume because of juice dripping somehow the only think I can tell you is, if you wick the coil and before close the tank put too much juice the coil overfeeding, I can't explain because of my crappy knowledge to my foreign language sorry.
I wont go back to power mode vaping. Didn't see a huge advantage when I first switched but as time went by I learned to like TC a lot more.Tc sounds boring
Sent from my SM-G960U using Tapatalk
I guess I haven't stayed with it long enough to really get use to it, but at this point everything just works perfectly for me, so I just dont want to mess things up. I'm sure I could get use to the taste of SS wire also, but prefer kanthal. I think if my mods worked kanthal in TC, I might keep trying it more often and maybe would like it in the end....what's the biggest single reason your liking it better now?I wont go back to power mode vaping. Didn't see a huge advantage when I first switched but as time went by I learned to like TC a lot more.
I just get a deeper, more saturated hit. Same hit every time. Never gets too hot. No heat, just flavor. I honestly did not realize how much I enjoyed TC until I went back and tried power mode again after mothballing it for a few months. It was quite an improvement.I guess I haven't stayed with it long enough to really get use to it, but at this point everything just works perfectly for me, so I just dont want to mess things up. I'm sure I could get use to the taste of SS wire also, but prefer kanthal. I think if my mods worked kanthal in TC, I might keep trying it more often and maybe would like it in the end....what's the biggest single reason your liking it better now?
Sent from my SM-G960U using Tapatalk
I use 50/50 with 0,32 coil at 14 watts
So what gauge is 0.32? Is that 28g? Just checked and it seems like 28g, which seems like good numbers. Have you tried unscrewing the af a smidge to loosen draw?I mean 0.32 wire thickness, with a 2.5id coil at 1ohm and 14 watts