Boxer Mod 200W with Evolv DNA200 Temperature Control
- Thread starter Yozhik
- Start date
- th_trl_thread_readers 0
- Status
You are correct. 2 and 3 needs to be bridged. One important thing is that 1 and two need to go to the correct battery or the chip will start up without a battery icon. It will not fire either. Port 1 needs to go to the + side of the battery that has the negative contact to the board. Port two needs to go to the + side of the battery that has the positive side going to the board.
Attachments
The DNA200 supports pass thru regardless of battery config.
Not true pass-through. Yes, you can vape with the USB cord plugged in. It will cut the charging and fire using the batteries. Then automatically restart charging after your vape. But it will not continuously charge while vaping nor will it fire with just the cable plugged in and no batteries inserted.
Well, so much for shipping. My Boxer is sitting at shiiping label has been printed status since Friday. I thought it would at least go out today.
thats the only part that sucks is waiting!! has anyone else received theirs??
Check your tracking! Mine just shipped tonight! More specifically, it left Freeport at 700 p.m. and left Western Nassau's USPS location about twenty minutes ago.
Last edited:
Could it be USPS? I have packages track as "shipping label" and show up as delivered in 3 - 5 days times. Happen to me with a strix elixir order last month.
Could be. I am very excited and paid for 2 day priority shipping. Hope it shows up tomorrow.
I hope it's usps not scanning the package. I have to live vicariously thru ppl in this thread til I get a dna boxer myself. [emoji23][emoji23]
Looks like you'll be able to live through two more of us vicariously as I too am receiving mine on Wednesday as per USPS's estimate which I've found to be pretty reliable.
ordered mine a week ago...site said expect 7 days waiting. now i see thats changed to two weeks! trying to have patience.....i've wanted one since the first version...guess i can wait however long it takes. would rather they not 'rush' the build...want a quality job done than sloppy rush job! so excited...anticipation...checking email constantly!!
cheers to the lucky Wednesday deliveries
cheers to the lucky Wednesday deliveries
well i only ordered my 133 on sat I'm sure ill be waiting a lil while but hey you never know!!
It's here! I just got it hooked up to Escribe and I'm working in the screens. First impressions:
It is very light. Not a bad thing, but surprising considering the LiPo inside.
Fits my hand well. I take an XL glove. The back is a little wide but manageable.
Amazing vape! I am coming from an SXK Flask (60w) and the power, consistency, and warm up time are all a huge step beyond what I have now. It powers instantly, no wait. I tried 200w
preheat and I am now at 50w!
It is very short. I have a Zero Clone as well and it is the same height, just twice as wide in the back tapering to the same width in the front.
I got black and I love the color and material. Feels slightly rough in the hands.
Going from the SXK firmware to DNA200 I dropped the temp by 40 degrees for the same vape.
I am going to play with it some more but my biggest worry was it would be too square. I chose the LiPo for this reason as I did not like the profile of the dual 18650 mod. Now if we could get the insert and sled to fit this form factor I would have the perfect mod. I will be testing out the battery life and will report back once I have some info. I vape at 440 degrees, 35 watts, dual titanium coils in a Goblin mini at .13ohms. Juice is 50/50 Nicoticket CLS and it tastes better than it ever has before. What a difference a non clone chip makes!
It is very light. Not a bad thing, but surprising considering the LiPo inside.
Fits my hand well. I take an XL glove. The back is a little wide but manageable.
Amazing vape! I am coming from an SXK Flask (60w) and the power, consistency, and warm up time are all a huge step beyond what I have now. It powers instantly, no wait. I tried 200w
preheat and I am now at 50w!
It is very short. I have a Zero Clone as well and it is the same height, just twice as wide in the back tapering to the same width in the front.
I got black and I love the color and material. Feels slightly rough in the hands.
Going from the SXK firmware to DNA200 I dropped the temp by 40 degrees for the same vape.
I am going to play with it some more but my biggest worry was it would be too square. I chose the LiPo for this reason as I did not like the profile of the dual 18650 mod. Now if we could get the insert and sled to fit this form factor I would have the perfect mod. I will be testing out the battery life and will report back once I have some info. I vape at 440 degrees, 35 watts, dual titanium coils in a Goblin mini at .13ohms. Juice is 50/50 Nicoticket CLS and it tastes better than it ever has before. What a difference a non clone chip makes!
- Status
