Cartoz carts E2's etc. post it here

Status
Not open for further replies.

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
I know 5C, and I'm not a "big" fan boy for them but they are on the cutting edge of the stuff comming out of China. Should have the CR3 first, becouse they are part TX, cutting edge will result in a lot of mishaps. They are honest and trying to make $ while on that cutting edge, not easy.
They can be on the cutting edge all they want as long as it's not with my money. I would feel like a Guinea Pig or Rhesus monkey if I bought any more junk from them. I have more of their products in my junk box than anyones. To be exact I have every product I bought from them in there.
To be fair though my son likes them.
 

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Thanks all and I am sorry for my lack of response all day. It has been a long bad one and this is the first opportunity I have had to sit down in peace... Last time I slept was Sunday night, so I do not believe I will be any good trying anything now. I did however think about switching out the cartos like that, but I was worried it would be messy. If I do stand up again today, I think I am just going to trash the juice and start from scratch. I do not wantt o put a new carto in there to find out I have poisoned it with NASTY juice.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Oh ya 5C, though I'm right about these, even a blind dog finds a covy sometimes.

So what's the Fusion Tank that Stormy makes you talked about 5C?

That's the other of all my new toys I think are great, for the CE2 people, is Stormy's tanks.
I've learned a lot from you KW.
I didn't even put juice in it with the E2 in it. I just popped out the E2 and put in a fusion with a slot cut in the side. I love it. It is a thirsty little darlin though.
My stormy came with an E2 in it, a CE2 will work too huh?
dsc02113jv.jpg
 
Last edited:

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Well, I finally got the nerve to remove the yucky carto from the liquinator tank and put a new one in. As sugested I pushed the bad one through about half way and then followed the good one in behind it. It worked, but the strange thing is when I started it was full, when I was done it was only half full. We did have a little juice drip out in the process but not 1ml or more so that was weird...

And now I am going to ask the question that really proves I have NO CLUE what I am doing. In the Vaporescence when he is done filling the tank he says to drip some juice into the top of the carto, which I did the first time. This time I haven't yet as I passed the top of the carto through the full tank so I assume some "dripped" in that way (hey maybe that is where my missing juice went) So when I was done I put it up close to my eye facing the light and I can see right through the carto. So if I dripped down into there wouldn't it just drip onto my battery. (Told you I am clueless)

Well, I switched cartos an hour and 57 minutes ago, so I am going to try it soon. Wish me luck!
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Miss typed, mean E2 and now that i think about it i don't know the difference, got to look up what a CE2 is and why i was thinking that
The E2 has a steel jacket, the CE2 has a clear plastic jacket. I guess you would have to use part of the plastic jacket the same as you do the steel one. The C stands for clear.

Well, I finally got the nerve to remove the yucky carto from the liquinator tank and put a new one in. As sugested I pushed the bad one through about half way and then followed the good one in behind it. It worked, but the strange thing is when I started it was full, when I was done it was only half full. We did have a little juice drip out in the process but not 1ml or more so that was weird...

And now I am going to ask the question that really proves I have NO CLUE what I am doing. In the Vaporescence when he is done filling the tank he says to drip some juice into the top of the carto, which I did the first time. This time I haven't yet as I passed the top of the carto through the full tank so I assume some "dripped" in that way (hey maybe that is where my missing juice went) So when I was done I put it up close to my eye facing the light and I can see right through the carto. So if I dripped down into there wouldn't it just drip onto my battery. (Told you I am clueless)

Well, I switched cartos an hour and 57 minutes ago, so I am going to try it soon. Wish me luck!
You hold it at a 45degree angle and drip some into the filler, rotate it as you do, then put it on the PV.

So what's the Fusion Tank that Stormy makes you talked about 5C?

Sorry KW I put that wrong. It's a Stormy tank with a Fusion put in it. I got the idea from the one Ruppy made, He's the inventor but I think he used the liquinator.
 
Last edited:

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Well the liquinator works MUCH nicer when you give it some time to obsorb some juice. I think the juice I used when I fried the first one did get a little fried as well. After we confirmed that mine worked, my husband filled his with the same juice and they taste different. The fried juice does not taste awful (not like the burnt carto did) and I am feeling cheap, so I am going to use it!

The only negative thing I can come up with so far is it is the loudest I have ever used.

And as an added bonus, I am now truly one of the gang... I got to try my new awesome tank/carto on a buzz today and it was AWESOME! Unfortunately, when I got to town and hit the post office, I did not think ahead and all I had with me was the LR carto in the liquinator on my tornado battery. I was not sure which way to turn the screw with the little screw driver, so vaping an LR at 4.5volts was a bit harsh for my taste. But the husband did not find it harsh at all (guess he is more hard core then me) Just got home a little bit ago. As soon as I am done posting here, I am going to put a regular carto in the liquinator, let it soak for a while and if the husband will let me see the buzz ( it is questionable if he will or won't) I am going to see how it does! If not I will just wait until he goes to sleep.

The little bit I did get to use it today it was awesome, even though it was a bit harsh! There is no doubt that it blows my little tornado away!
 

moorea

Unregistered Supplier
ECF Veteran
Aug 11, 2009
6,868
7,355
55
Marion, MT
phiniac.com
Yes, it is sitting here right now and there is so much vapor I am having trouble reading the computer screen! If you made me come up with a complaint about the buzz I would be hard pressed. I guess the only issue I am having, and it is a small one... When I pick it up without paying attention, I keep trying to press the little led light instead of the button. But that might just because I am a little slow at times. The Buzz is aewsome and you are an amazing person for letting me borrow it.

I do have one question, I thought I read some where that there was a way to turn it off for traveling in pockets and bags? Is that just the Pro or does the buzzz have that as well?
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Well if you knew me you would know I wasn't going to stop at the Fusion Tank. I have ruined a lot of the mods I built trying to make them just a little bit better. Here is the Mega 808 Tank. The reason I made it was because the Mega 808 is my second favorite cartomizer. But the main reason was because the Fusion doesn't go all the way through the tank. It's shorter than the Mega 808 and it bothered me that I could knock the end out and have juice all over. This one also has twice the juice capacity as the Fusion I made did. Now I'm going to see if I can put a port on it for filling because it is a little harder to get the top seal in. It vapes like a fog machine and no leaks.

mega2y.jpg

dsc02130kd.jpg


BTW I had to clean off the black paper that was on it. It is great so far and I can carry it in my pocket without worrying abot springing a leak.
Okay I put a small hole in the side and it works great to fill it. Now I don't have to go through all that drama to fill it. I really like it. It holds about 1.5 ML.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread