Catfish Atty Mods the next Chapter

[RobbieVape]

I freehand wrap using one of these...( jeweler's looping tool) The small one of course.

I use to use something similar but the coil master makes things a lot easier. If you have not tried you should give a go


Sent from my iPhone using Tapatalk

 

[distortoblotto]

Have a coil master but I find I can wrap faster and get better results with the looping tool. Just leave the legs a wee bit longer and hold the coil to the tool then pull on the legs with the needle noses to tension the coil.

 

[Chowderhead1972]

Burned my lip on it yesterday, other than that i love the atty

How low are you coiled? I chain vape at .39 and have even gotten warm.

 

[Sloth Tonight]

 

[Chowderhead1972]

Thoughts on an 17-18mm Vector? 3/4 scale. With a skinny twisted "T" center post? The flavor would be like licking the lid of your favorite juice bottle. Twisted T: dual hole center post like the one on the Haze, bonsai, and hellboys by twisted 90 degrees and with the terminals on the ends of the "T". T

Just thinking out loud....

Better idea... Same concept in the ATTY3 to match the top of the reo LP 510? The AATTY3's are here and they are really well made. I'm trashing the hellboys. Utter Shiite compared to the atty3.

 

[TheDigital99]

Thoughts on an 17-18mm Vector? 3/4 scale. With a skinny twisted "T" center post? The flavor would be like licking the lid of your favorite juice bottle. Twisted T: dual hole center post like the one on the Haze, bonsai, and hellboys by twisted 90 degrees and with the terminals on the ends of the "T". T

Just thinking out loud....

Interesting concept...... Loads of flavor

 

[rudedog]

Magaro...I'm not sure they have enough VG in the jooce...haven't tried any Nicoticket flavor in a dripper, but I use the jooce in tanks, which is fantastic....I bought a couple hundred bucks worth last night @ 50% off.

To me, most of the jooce is sweet and thin, which is fine in a tank, but I doubt it would pan out in a dripper.

Kent said he was going to begin offering VG options soon....which will be nice.

Sloth should know, I assume he vapes Wakonda on a REO....but it doesn't taste much like coffee to me....though I do like the flavor.

yeah I used to be a wakonda junkie and then something happened when I got some a month ago....so bummed.maybe what I got from a swap had been vandalized!but they said it tasted bad to them to...after I traded...lol.anyways Tom the cam m looks awesome!cant wait but will!

 

[Wolfenstark]

Atty3 pay time ?
Need you to hold along with the vector.
Waiting for another one to take my fancy.

 

[druckle]

lI came up with clungy but effective "fix" for the Vector drip tip issues I was having. I don't particularly like a drip tip as large in diameter as the Vector tip and I don't like my lips being so close to the air intake holes.

My "solution" was to take a small length of 1/4" diameter silicone aquarium airline tubing and stretch it to the max over some needle nose pliers. I heated it with a hair dryer to make it stretch more than it wanted to then put the whole thing in the freezer for 5 minutes.

When it came out it fit snuggly over a standard 510 drip tip and the whole assembly fit perfectly/snuggly in the standard Vector drip tip.

I'm hoping Tom's tips are available soon but in the short term I can vape the Vector and enjoy to the max!

Duane

 

[Wolfenstark]

If anyone got a samurai bonsai clone that may help with the vector.
Don't have my vector so don't know.
One of the bonsai tip/caps you can pull the top bit off but it may be too small or large.

 

[supersport13]

View attachment 463694

Bit chin' Woodville sloth!!!

 

[Mantis4343]

How low are you coiled? I chain vape at .39 and have even gotten warm.

Had it set up at 8 wraps 27 gauge came about to about .54. The issue was i wasnt used to using such a short tip and got my lip too close to one of the holes lol! I do love the atty though, im very interested in this delrin tip ive seen talked about here though. Any idea when that might be available?

 

[supersport13]

Thoughts on an 17-18mm Vector? 3/4 scale. With a skinny twisted "T" center post? The flavor would be like licking the lid of your favorite juice bottle. Twisted T: dual hole center post like the one on the Haze, bonsai, and hellboys by twisted 90 degrees and with the terminals on the ends of the "T". T

Just thinking out loud....

Better idea... Same concept in the ATTY3 to match the top of the reo LP 510? The AATTY3's are here and they are really well made. I'm trashing the hellboys. Utter Shiite compared to the atty3.

I'm so down with that idea Tom!

 

[Chowderhead1972]

Big air drip tip

 

[distortoblotto]

Anyone see the latest atty3 list floating around?

 

[Chowderhead1972]

Had it set up at 8 wraps 27 gauge came about to about .54. The issue was i wasnt used to using such a short tip and got my lip too close to one of the holes lol! I do love the atty though, im very interested in this delrin tip ive seen talked about here though. Any idea when that might be available?

I believe TBev is working on a delrin version as well as a Teflon (white) version.

 

[LittleBird]

Clarksburg is in Northern Montgomery County? Thinking. Thinking ... That row of mods is amazing!

 

[Chowderhead1972]

Clarksburg is in Northern Montgomery County? Thinking. Thinking ... That row of mods is amazing!

What this little old thing?

 

[LittleBird]

Atty3 List
1. TheDigital99
2. SteelGirl
3.distortoblotto
4. Robbieblood
5. Wolfenstark (Black)
6. Mommabird62 (Black)
7. petemoss
8.subohmies
9. Raynman (Black)
10. d4gger (Stainless)
11. d4gger (Black)
12. LittleBird (Stainless)
13. Steve Parry (Black)
14. ItTechy (Black)

 

[LittleBird]

View attachment 463729
What this little old thing?

What's the red one? We like!