[CLOSED BUSINESS]
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
Ahoy all!
Just the usual weekend here, but I did do a few custom desk caddies and I think I may make a couple of them available on the website for others who might like the designs requested.
This one is the large box model built for the DIY kinda person with a bunch of 30ml, 6ml and 3 ml holes along with some DP holes.
And here is one that will hold eight box mods and 10 RM2 / A7, etc sized rebuildables.
Tomorrow I get all these desk caddies shipped, then inspect the batch one more time and if they all still look good I will wax, buff, assemble the accessories kit and do the paperwork to get them ready to ship!
Hope you all had a good weekend, arrrr
Just the usual weekend here, but I did do a few custom desk caddies and I think I may make a couple of them available on the website for others who might like the designs requested.
This one is the large box model built for the DIY kinda person with a bunch of 30ml, 6ml and 3 ml holes along with some DP holes.
And here is one that will hold eight box mods and 10 RM2 / A7, etc sized rebuildables.
Tomorrow I get all these desk caddies shipped, then inspect the batch one more time and if they all still look good I will wax, buff, assemble the accessories kit and do the paperwork to get them ready to ship!
Hope you all had a good weekend, arrrr
is there a 50 box mod caddy version? 
actually, i'm more interested in bottom-feeders. DNA or 3.7. will the upcoming batch be posted on the site or are you taking orders via PM? sorry, i'm kinda new here.
but i would be interested in a 50 count box mod caddy...
actually, i'm more interested in bottom-feeders. DNA or 3.7. will the upcoming batch be posted on the site or are you taking orders via PM? sorry, i'm kinda new here.
but i would be interested in a 50 count box mod caddy...
is there a 50 box mod caddy version?
actually, i'm more interested in bottom-feeders. DNA or 3.7. will the upcoming batch be posted on the site or are you taking orders via PM? sorry, i'm kinda new here.
but i would be interested in a 50 count box mod caddy...
The current batch is nearly complete. There will be some bottom feeders posted on the website and I will also post pictures here on the thread of all the mods when they are complete as well.
As for a 50 box desk caddy. Sure, no problem. Do you want it just like the picture above, but 10 rows of 5 boxes each? I may have to make it in two parts or two 25 box caddies.
Judging by your avatar, I bet you could fill that up and then some
Oh silly me, Capt already replied to you here on the forum. Sorry about that. I'm a bit slow this morning
Hiya Mama Here is the current batch that Capt is working on and I believe if you send him a message he will get back to you quickly. he's real good about that sort of thing.
Post # 208 has pic's and some info http://www.e-cigarette-forum.com/fo...exotic-wood-pvs-desk-caddies-part-3-a-21.html
Hiya Mama
Here is the current batch that Capt is working on and I believe if you send him a message he will get back to you quickly. he's real good about that sort of thing. Post # 208 has pic's and some info http://www.e-cigarette-forum.com/fo...exotic-wood-pvs-desk-caddies-part-3-a-21.html
is there a 50 box mod caddy version?
actually, i'm more interested in bottom-feeders. DNA or 3.7. will the upcoming batch be posted on the site or are you taking orders via PM? sorry, i'm kinda new here.
but i would be interested in a 50 count box mod caddy...
Last edited:
Yeah I've got an issue, 
Plus I have a Cutlass HD and will be adding a Cutlass DNA soon.
Plus I have a Cutlass HD and will be adding a Cutlass DNA soon.
Heh heh, don't we all. I can't believe I got a Sophia over the weekend. I have been fiddling with it the whole time also. Not sure this is for me. Can't wait till I get the Cutlass. No muss no fuss
And yes yes I KNOW you have one coming!!! The one I wanted LOLOLOL
No worries, I'm just funnin with ya. I love the look of the other one I chose
And yes yes I KNOW you have one coming!!! The one I wanted LOLOLOL
No worries, I'm just funnin with ya. I love the look of the other one I chose
Ahoy and Aloha me 'earties.
Busy as hell here, got so many things to suddenly do but I will just take 'em one at a time.
I want to start waxing the mods but I'm not entirely happy with how dry they are. We got a lot of rain this past week and I might give them one more day of drying before I wax and buff them. I want the Poly-urethane to be nice and hard before I handle them. The finish gets harder and harder the longer it sets so patience is the key.
Trying to keep up with other questions & PM's, if you feel like I've forgotten you or your question please shoot me another PM, I'm getting old and forgetful, arrrr!
Have a great day all.
Busy as hell here, got so many things to suddenly do but I will just take 'em one at a time.
I want to start waxing the mods but I'm not entirely happy with how dry they are. We got a lot of rain this past week and I might give them one more day of drying before I wax and buff them. I want the Poly-urethane to be nice and hard before I handle them. The finish gets harder and harder the longer it sets so patience is the key.
Trying to keep up with other questions & PM's, if you feel like I've forgotten you or your question please shoot me another PM, I'm getting old and forgetful, arrrr!
Have a great day all.
Yaaay Cherry Wunderwood Large Combo Caddy on the way - Transaction ID: 6B548612W4587993V shipping notice.
Thank ye Cap'n!
Thank ye Cap'n!
Ahoy, happy Tuesday!
How about a few pictures for ya.... Here are the mods that have had 'dibs' called on them. I wanted to finish these first, then I will do the rest of the batch.
I took the pictures outside, it was very bright and just had to trust the auto-focus as I couldn't see the screen well. I also noticed I had a bit of wax dust and a stray strand or two of lint from the buffing wheel I failed to clean off on some. Ah well.... here they are
Cutlass; Black walnut body, black mesquite panels and end caps
Cutlass; African mahogany with Canarywood panels and end caps
Destroyer; Solid Ziricote
Destroyer; Curly tiger maple body & panels with two yellowheart vertical layers
Destroyer; Brazilian Imbuia body with East indian rosewood panels, Jolly roger engraving
Cutlass 26650 battery; Curly redwood body & quilted maple panels
Destroyer 26650 battery; Brazilian Imbuia body, Koa side panels
I want to get these taken care of (paperwork mostly), then I will work on getting the rest of the batch ready for the website and posting pics here on the thread.
Yo ho!
How about a few pictures for ya.... Here are the mods that have had 'dibs' called on them. I wanted to finish these first, then I will do the rest of the batch.
I took the pictures outside, it was very bright and just had to trust the auto-focus as I couldn't see the screen well. I also noticed I had a bit of wax dust and a stray strand or two of lint from the buffing wheel I failed to clean off on some. Ah well.... here they are
Cutlass; Black walnut body, black mesquite panels and end caps
Cutlass; African mahogany with Canarywood panels and end caps
Destroyer; Solid Ziricote
Destroyer; Curly tiger maple body & panels with two yellowheart vertical layers
Destroyer; Brazilian Imbuia body with East indian rosewood panels, Jolly roger engraving
Cutlass 26650 battery; Curly redwood body & quilted maple panels
Destroyer 26650 battery; Brazilian Imbuia body, Koa side panels
I want to get these taken care of (paperwork mostly), then I will work on getting the rest of the batch ready for the website and posting pics here on the thread.
Yo ho!
we can call dibs? how does that work?
on a related note, do you accept us sending in blocks of wood to make a mod out of? i would be happy to send in a block or two of wood. i would pay full price (or even a surcharge for custom work), even tho i supplied the wood. and i would accept the reality that my wood may not survive the process. my risk, not yours. if this is feasible, i would like the min dimensions of wood blocks (for the 2 bottom-feeders sizes), and an idea of any kinds of wood you would not care to deal with.
and if it ain't feasible, i'll just stalk the site
on a related note, do you accept us sending in blocks of wood to make a mod out of? i would be happy to send in a block or two of wood. i would pay full price (or even a surcharge for custom work), even tho i supplied the wood. and i would accept the reality that my wood may not survive the process. my risk, not yours. if this is feasible, i would like the min dimensions of wood blocks (for the 2 bottom-feeders sizes), and an idea of any kinds of wood you would not care to deal with.
and if it ain't feasible, i'll just stalk the site
OMG is that first one mine???? It is beautiful! Oh Captain this is wonderful work you have done here. It is so much prettier than I expected
we can call dibs? how does that work?
on a related note, do you accept us sending in blocks of wood to make a mod out of? i would be happy to send in a block or two of wood. i would pay full price (or even a surcharge for custom work), even tho i supplied the wood. and i would accept the reality that my wood may not survive the process. my risk, not yours. if this is feasible, i would like the min dimensions of wood blocks (for the 2 bottom-feeders sizes), and an idea of any kinds of wood you would not care to deal with.
and if it ain't feasible, i'll just stalk the site
I have done that in the past and most of the time it has worked out ok. I have received stabilized burl in the past though, that even though I made the mod it had many voids that were impossible to fill and the wood was a bit 'mushy'. It might be a good idea to post the link to the wood you were interested in so we could take a look at it b4 it was purchased.
The dimensions I would need that would cover any model would be 2 3/4 x 1 1/2 x 5. For just a 18650 model it would be 2 1/4 x 1 1/4 x 5 inches.
And if Dennis (MamaTried) nags you into a custom one too....then they'll ALL want one!
T
T
- Status
Similar threads
