difficult draw & poor vapor with i3...

[spiros]

i'm having some hard time to vape using the i3 901 atties

draw is very hard and vapor is very poor in comparison to the 510 atties. I tried them on ggts & eGo batteries.

any solution/ideas?

 

[imeothanasis]

i'm having some hard time to vape using the i3 901 atties

draw is very hard and vapor is very poor in comparison to the 510 atties. I tried them on ggts & eGo batteries.

any solution/ideas?

Blow the atomizer hard from the side that mouthpiece goes. Do it for some time and smoke again by putting 3-4 drops of liquid inside Spiros

 

[mwa102464]

Imeo how about that 510 iAtty

 

[imeothanasis]

Imeo how about that 510 iAtty

They are ready and they will be shipped to my sellers with the AFS iatties that I fix now mwa

 

[wood_510]

i'm having some hard time to vape using the i3 901 atties

draw is very hard and vapor is very poor in comparison to the 510 atties. I tried them on ggts & eGo batteries.

any solution/ideas?

I haven't experienced this problem, but keep us informed on any solutions or progress with you problem... I like to know how to fix problems when I run across them...

 

[Stormynights]

i'm having some hard time to vape using the i3 901 atties

draw is very hard and vapor is very poor in comparison to the 510 atties. I tried them on ggts & eGo batteries.

any solution/ideas?

I always wait for someone else to answer any technical type questions but try to loosen the attie just a hair. If they are screwed on too tight the draw is reduced.

 

[imeothanasis]

Or maybe its the specific atomizer, nothing more. But lets wait for Spiros's results

 

[ggero]

At the Greek forum, spiros said that he is using Ecopure juice...It is VG and very thick..I think that this is his problem..He should push the GG button some time longer for the resistance of the attie to come red..Only then he will have plenty of smoke

 

[imeothanasis]

At the Greek forum, spiros said that he is using Ecopure juice...It is VG and very thick..I think that this is his problem..He should push the GG button some time longer for the resistance of the attie to come red..Only then he will have plenty of smoke

I see ggero. So I think that if he blow inside atty then he will have the results he want

 

[ggero]

I have used the same juice with i3 and I am not pleased with the result ...Its the juice, not the attie ...The juice needs to be cutted with some PG ..Then the result is good ...

 

[imeothanasis]

I have used the same juice with i3 and I am not pleased with the result ...Its the juice, not the attie ...The juice needs to be cutted with some PG ..Then the result is good ...

Maybe atty is clogged. He has to blow air inside atty and burn the remaining liquid by pressing button for a few seconds.

 

[spiros]

well, after 2 days of use of those three i3's , here's the situation:

drawing got easier but not as the 510 that i have.

vapor production is far away than those 510. I used more than one liquid, by dripping or not.

i also used those i3 at 7,2V but nothing changed.

also, my ggts whistles!

 

[ggero]

i3 at 7.2V its no good....maybe you will ruin your atties...
Its kind of odd your situation ...

 

[mwa102464]

i3 @ 1.5 ohms would be a killer I think @ 3.2-3.7v

 

[spiros]

i3 at 7.2V its no good....maybe you will ruin your atties...
Its kind of odd your situation ...

i gave it a try only for a few seconds

 

[imeothanasis]

i3 @ 1.5 ohms would be a killer I think @ 3.2-3.7v

1,5 ohm atomizers will drain your batteries so quickly that you have to carry a bag of batteries in your pocket mwa. They need double current but results are the same as the HV ones.

 

[imeothanasis]

well, after 2 days of use of those three i3's , here's the situation:

drawing got easier but not as the 510 that i have.

vapor production is far away than those 510. I used more than one liquid, by dripping or not.

i also used those i3 at 7,2V but nothing changed.

also, my ggts whistles!

Spiros, put noalox to the rethreater and no whistle any more. About i3 vapor production you have to know that i3 is 3 ohms and you maybe have an 510 at 2,5 ohm. That means that 510 will have more vapor but smaller life. I tried to marry the vapor and the throat kick with the atomizer's life so the right ohms for me are the 3 ohms.

I have to see those atomizers to tell you what is going on, maybe its the liquid or something else. If you want to come to my house today then we can solve the issue

 

[spiros]

Spiros, put noalox to the rethreater and no whistle any more. About i3 vapor production you have to know that i3 is 3 ohms and you maybe have an 510 at 2,5 ohm. That means that 510 will have more vapor but smaller life. I tried to marry the vapor and the throat kick with the atomizer's life so the right ohms for me are the 3 ohms.

I have to see those atomizers to tell you what is going on, maybe its the liquid or something else. If you want to come to my house today then we can solve the issue

thanks Thanasis, i'll give you a call now

 

[spiros]

all problems solved!

Thanasis magical hands took the i3 and made them work as a charm

nothing special actually, just a good blow from both sides, and a good draw from the hole on the side.

since i was at his place, i tried 6V with afs... Not really much to say, just...
i'm placing my order now for 6V batteries and a charger....
be very careful, if you try it, you can never go back at 3,7V!!!

thanks (again) Thanasis

 

[imeothanasis]

all problems solved!

Thanasis magical hands took the i3 and made them work as a charm

nothing special actually, just a good blow from both sides, and a good draw from the hole on the side.

since i was at his place, i tried 6V with afs... Not really much to say, just...
i'm placing my order now for 6V batteries and a charger....
be very careful, if you try it, you can never go back at 3,7V!!!

thanks (again) Thanasis

xaxaxa thanks friend.
We also stopped whistling? Is GG ok now buddy?