Looks sharp Nuuze, is that someone elses tube in the first picture beside mine? Hard to tell from the picture but it looks flame polished and we dont do that.
- Status
22mm is on the horizon along with a 30mm for big battery mods. Been wanting to do the 22mm for some time now because I agree it will be a very nice fit for 18 series battery devices. I have a few things to work out on the materials side yet but I am hopeful that before years end will have them both, maybe sooner depending on how things go. One of my main issues is in finding an economical supply of acrylic rod for making these. No stainless caps on these sizes to start but I would like to add those options too.
This is the protos for the Standard and XL on 30mm on the Stinger and BAM, should have a measurement for capacity tonight or tomorrow but lets just say at least for the XL if your battery lasts all week the service might be like this
Charge battery
Change Carto
Refill
Enjoy for another week
This is the protos for the Standard and XL on 30mm on the Stinger and BAM, should have a measurement for capacity tonight or tomorrow but lets just say at least for the XL if your battery lasts all week the service might be like this
Charge battery
Change Carto
Refill
Enjoy for another week
Thanks for the info, OCD! I love my turquoise 19mm tank, and I'm looking forward to the other size options once you have the SS caps available. I might even have to find a good big battery mod for that 30mm option you're working on!
Thanks for the info, OCD! I love my turquoise 19mm tank, and I'm looking forward to the other size options once you have the SS caps available. I might even have to find a good big battery mod for that 30mm option you're working on!
My thoughts exactly!
We try to keep our prices low across the store so I have to say here. Any of them with "Hole" in the name are pre punched. My preference is for the 2 ohm on straight battery voltage and the 3.2 ohm for variable voltage.
Same here, except I use the Smok 1.7 (resurrector) on my 3.7v mod. It looks like your prices are lower than what I was getting with a multi-pack "deal" from another vendor, so an order will be coming your way in the next week or two.
Just wanted to put a note out there regarding something I saw re the Vivi Nova and a glass tank for it. There is a lot of confusion regarding this name as there are a couple of devices sharing it that are quite different from each other. The Offspring mixed this up understandably and I wanted to clarify here because I cannot respond in the threads regarding my products.
The tube we will have on the site soon is for the Vivi Tank like this one that seals with orings not the one that has Nova in the name and has threaded ends. I could have stainless adapters made for this system but I would have to design them, order them in the several hundreds and sell them for twice what the device costs so honestly I dont think it makes a lot of sense to make them, sorry if some folks got their hopes up on this but I just cannot see it happening.
Kind of bums me out too, you all cant imagine how much pleasure I get out of helping folks out in all of this vaping gear and getting the best stuff out to you at prices that are reasonable... 4 months ago there wasnt a $22 complete glass tank with stainless caps and there still isnt a $5 glass tube other than at IBTanked and I take a lot of pride in bringing that to the community.
I will continue to match up glass where I can but unfortunately there are going to be those times when there just isnt anything I can feasibly do.
I can understand the excitement and desire to adapt glass to ones favorite device but honestly I dont see it happening for the Nova.
The tube we will have on the site soon is for the Vivi Tank like this one that seals with orings not the one that has Nova in the name and has threaded ends. I could have stainless adapters made for this system but I would have to design them, order them in the several hundreds and sell them for twice what the device costs so honestly I dont think it makes a lot of sense to make them, sorry if some folks got their hopes up on this but I just cannot see it happening.
Kind of bums me out too, you all cant imagine how much pleasure I get out of helping folks out in all of this vaping gear and getting the best stuff out to you at prices that are reasonable... 4 months ago there wasnt a $22 complete glass tank with stainless caps and there still isnt a $5 glass tube other than at IBTanked and I take a lot of pride in bringing that to the community.
I will continue to match up glass where I can but unfortunately there are going to be those times when there just isnt anything I can feasibly do.
I can understand the excitement and desire to adapt glass to ones favorite device but honestly I dont see it happening for the Nova.
Just wanted to say thanks OCD for a great product. Got my IBT last week and I'm loving it. It's my first carto tank and I'll be getting more for sure.
if you figure out how to make an exact tank like the plastic ones but pyrex i bet you get 1000 orders first week, i know im in for 5 threads in pyrex seems like a conundrum though, the manufacturer would have to build a mold right? how do you get clean threads seems hard and labour intensive but can be done!! hell we have people floating around the world in a tin can doing experiments, we can do this
threads in pyrex seems like a conundrum though, the manufacturer would have to build a mold right? how do you get clean threads seems hard and labour intensive but can be done!! hell we have people floating around the world in a tin can doing experiments, we can do this
Thanks Ed, always good to hear folks like them.
Jeff, I dont know if you would feel the same when you saw the price I would have to charge for something like this. As far as threading the glass to match the Nova threads I dont see it. The threads would be brittle and chip off each time you removed the cap. I do have an idea though for you folks and I will order one of these tanks to see if I can make something happen.
Jeff, I dont know if you would feel the same when you saw the price I would have to charge for something like this. As far as threading the glass to match the Nova threads I dont see it. The threads would be brittle and chip off each time you removed the cap. I do have an idea though for you folks and I will order one of these tanks to see if I can make something happen.
i thought of something, what about a luer lock system? top and bottom cap and pyrex with that system?
Luer lock is just another kind of thread isnt it? It would be something that could be formed into glass much better than a fine machine thread but still beyond what I think could be affordable with our facility anyhow. I do have an idea that I think may work well and be inexpensive so give me a week or so to get this in and play with it.
How about threaded ring adapters with o rings on them? They attach to the top and bottom of the nova and the tank tube sleeves over them, sealing with the o rings. Sounds pretty involved, but it could work.
Cool ocd, I will await word on the mini-did tank, your Greek did tank rocks btw.
Sent from my cm_tenderloin using Tapatalk 2
- Status
Similar threads
