- Status
You will have to pick a number on that Chad... I cant say what you need there but like I mentioned the Standard Tube length is 1.210" so we can work from there.
Speaking of tube length. With an impressive length of 0.600" Halfling was born. In the 22 it holds right on a staggering ONE ml
Have it sitting on a Poldiac with Black caps right now and seems to be vaping fine. Got some big giggles from the girls for being such a bitty tank. I am thinking in 25s it may reach close to two mls. Will get a picture of the 22 Halfling up later but will tell you now its almost too cute and even looks pretty decent on a 650 VV Winder with a flared 5ml beauty ring.
Speaking of tube length. With an impressive length of 0.600" Halfling was born. In the 22 it holds right on a staggering ONE ml
Have it sitting on a Poldiac with Black caps right now and seems to be vaping fine. Got some big giggles from the girls for being such a bitty tank. I am thinking in 25s it may reach close to two mls. Will get a picture of the 22 Halfling up later but will tell you now its almost too cute and even looks pretty decent on a 650 VV Winder with a flared 5ml beauty ring.
Thanks for the updates on the Halfling! Sounds super cool, I'm sure I'll get at least one once they are up on the site. So the plan is milling a little hollow in the endcaps huh, clever indeed, I figured there was some trickery to get some additional capacity. I love things that are shrunk down to a ridiculously small level so I'm sure I'll love those thanks.
Those little ST shorty cartos hit really really nice too, I haven't used them in awhile (because they don't fit any tanks... yet) but I remember them giving a bit better flavor, and a warmer vape compared to 35mm or 45mm cartos. Probably because the coil is so much closer to your mouth when taking a vape.
Are you going to be offering the short glass by itself, or are the endcaps going to be changed to the point where they will be proprietary to the halfling?
Those little ST shorty cartos hit really really nice too, I haven't used them in awhile (because they don't fit any tanks... yet) but I remember them giving a bit better flavor, and a warmer vape compared to 35mm or 45mm cartos. Probably because the coil is so much closer to your mouth when taking a vape.
Are you going to be offering the short glass by itself, or are the endcaps going to be changed to the point where they will be proprietary to the halfling?
The 22s and 25s are already hollow on the inside. This was done to reduce weight by removing unneeded material, the 19s had absolutely no unneeded material so they have no recess in them.
These are cute as hell thats for sure. I need to get that picture because it is sure hard to describe. The size of tube is the same as the other sizes so existing caps will work. I used 0.600" for the length and it worked out almost perfect for the body part of the tube but if someone wanted to push it they could probably go to 0.650" This could be purchased as a custom tube but it would cost more and have to purchase 3 right now. I will get them up on the site soon though, I just need to fir a run of them into the schedule before I do.
I noticed the hit was quite a lot warmer myself and yes there is plenty of flavor there. Working on my second tank fill and it still seems to be going well. Once I get a few more of these made up will take the pictures and check to see how many tanks will stack into an XL thingy. If three would fit into one thingy it would be a pretty awesome way to pack a flavor selection that would give four mls for the day counting one on a device that could ride in the pocket and easily be switched out.
These are cute as hell thats for sure. I need to get that picture because it is sure hard to describe. The size of tube is the same as the other sizes so existing caps will work. I used 0.600" for the length and it worked out almost perfect for the body part of the tube but if someone wanted to push it they could probably go to 0.650" This could be purchased as a custom tube but it would cost more and have to purchase 3 right now. I will get them up on the site soon though, I just need to fir a run of them into the schedule before I do.
I noticed the hit was quite a lot warmer myself and yes there is plenty of flavor there. Working on my second tank fill and it still seems to be going well. Once I get a few more of these made up will take the pictures and check to see how many tanks will stack into an XL thingy. If three would fit into one thingy it would be a pretty awesome way to pack a flavor selection that would give four mls for the day counting one on a device that could ride in the pocket and easily be switched out.
All of the current ones are of the same design. There have been some minor alterations but not for several months now so I suppose the answer to the first part of that is depends on when you purchased it.
The numbers I gave you were from measuring the current 22mm setup and there has only been one version of the 22s. The old 25 caps did not have the hollow on the inside of the caps until early this year, those are all SS of course as we dont have the 25s in anodized yet.
The numbers I gave you were from measuring the current 22mm setup and there has only been one version of the 22s. The old 25 caps did not have the hollow on the inside of the caps until early this year, those are all SS of course as we dont have the 25s in anodized yet.
We have worked our butts off to make that kind of pricing work for top quality gear. Our inventory commitment with our shop that makes our caps alone is like buying a house on a six month mortgage but you know it is working out. Certainly no one getting rich overnight around these parts though that isnt why we started this so its all good
Lol, we already have our table booked Cool though... get the word out buddy because we want to see everyone there.
I just sent in an Inquiry for VapetoberFest in Long Beach for October, kind of close to VapeFest but since it is driving distance like Vegas for us we should be able to pull it off easily. There is another in Anaheim the same weekend as VapeFest unfortunately but I think Vegas is the place to be so thats where we will be I did try to talk the Offspring into going to Anaheim... well you might imagine where tryin to talk a 21 year old out of a trip to Vegas ended up
Cool though... get the word out buddy because we want to see everyone there.I just sent in an Inquiry for VapetoberFest in Long Beach for October, kind of close to VapeFest but since it is driving distance like Vegas for us we should be able to pull it off easily. There is another in Anaheim the same weekend as VapeFest unfortunately but I think Vegas is the place to be so thats where we will be
I did try to talk the Offspring into going to Anaheim... well you might imagine where tryin to talk a 21 year old out of a trip to Vegas ended up
Hehe... good to hear. I think this event is going to be a huge blowout. Vapefest NY had close to two thousand people I think. One of the cool things they do is smokers get in for free and get a free ecig if they smash their smokes at the door and pin them up.
Finally got the pictures of the Halflings. These are on a few different devices to show size and how they look on them. You will have to excuse the dust, these are hard at work devices and I didnt take the time to do the spit and polish for the pics and I didnt want to reduce them to hide it because you would not be able to get up close and personal.
Background is a Dirt Shirt from Hawaii with the Honu on it. Thats my vape shelf and I needed to cover up all the cords and other crap that live there
Left to right - Provari Mini w/extension - eGo Smok 650 Winder w/5ml DCT flare cone - Mmvapors Poldiac in 350 - (front) Mamu Stealth (I call him Mini Max) (rear) Nhaler Opus - Mamu Max
Finally got the pictures of the Halflings. These are on a few different devices to show size and how they look on them. You will have to excuse the dust, these are hard at work devices and I didnt take the time to do the spit and polish for the pics and I didnt want to reduce them to hide it because you would not be able to get up close and personal.
Background is a Dirt Shirt from Hawaii with the Honu on it. Thats my vape shelf and I needed to cover up all the cords and other crap that live there
Left to right - Provari Mini w/extension - eGo Smok 650 Winder w/5ml DCT flare cone - Mmvapors Poldiac in 350 - (front) Mamu Stealth (I call him Mini Max) (rear) Nhaler Opus - Mamu Max
NICE!
I'm loving those halflings! There is more space in there than I thought there would be. Now I HAVE to order a few more tanks
Not to rush you at all, I'm just curious, but any idea on when these will be on-site?
I'm loving those halflings! There is more space in there than I thought there would be. Now I HAVE to order a few more tanks
Not to rush you at all, I'm just curious, but any idea on when these will be on-site?
Received my 7th tank from you folks, today . . . A standard SS 22mm tank. Obviously, I like the sleek lines.
- Andy
- Andy
Also, how about those Tiny Tanks you mentioned? I'd love to see photos. Though tbh, I'm going to order a couple anyways. =)
Those are the Halflings right? I'm curious about the Tiny Tanks, 16mm tanks I believe. I'm itching to get a couple small diameter, XL length tanks for my two epipes.
Sent from my Nexus 4 using Tapatalk 2
- Status
Similar threads
