Diver in the 22mm on the Nemesis.
Wait!!!! Enough is enough . . . That is simply rude and hitting below the belt!
- Andy
- Status
Wait!!!! Enough is enough . . . That is simply rude and hitting below the belt!
- Andy
Hey I have heard that you guys are super busy preparing your goodies for the next vape show but I received a funny tracking number with my order that does not show up on any shipping sites.
Order# bad303311
Any help on getting a correct tracking#?
Order# bad303311
Any help on getting a correct tracking#?
hi, don't know if you got an answer back, but just to let you know, i had one of those the other day...
turn out there was a few numbers too much... maybe this will work for you... remove the first 3 numbers??
ie: LJ872872097059US is now LJ872097059US
hope this helps...
didn't get an answer but it was in my mailbox when I got home so all is well. tried removing some characters from the beginning and end to no avail.
Lol, The Offspring just sent the correct tracking number. She does these by hand currently so sometimes there is a typo in them. The international numbers are different Reg, I think they dont want the letters when you look them up. Good to hear you got it though Munsterrr.
The perils of International ordering there Chad. I recently got upgraded with UPS so we will probably be looking at adding that as an option in the future, just need to work out all the Zone stuff so we dont end up losing a ton by doing it.
Next week is VapeStock already... wow. Where does the time go? Been looking forward to this for half a year now and we are all excited to meet a lot of the folks we have been talking with.
Next week is VapeStock already... wow. Where does the time go? Been looking forward to this for half a year now and we are all excited to meet a lot of the folks we have been talking with.
UPS does their absolute best to screw Canadians out of money when they bring us our stuff lol.
Shipping was 6$, I can't complain, the cheapest it gets in Canada is 11$ and that's from the other side of my city lol.
Shipping was 6$, I can't complain, the cheapest it gets in Canada is 11$ and that's from the other side of my city lol.
Got some of the Drip tips in today, will get some pictures later but wanted to let everyone know they look better than I could have imagined they would. They also work great for covering up a fair amount of over extension on a cartomizer. The fit is so nice it is difficult to tell that they are not part of the cap when paired with the same color.
Been using one of the Pawns today, got those and the Rooks and the Bishops should be in Monday or Tuesday. The mouth feel on the Pawn is different for me as my favorite style is like the Rook but I am diggin the looks of it and it fits the 1/2ling awesome, fitted to a Smok ZMAX Mini its a pretty sweet package.
Other packages showing up today were boxes and boxes of T Shirts. The Offspring is sorting and folding them now... lol, it was pretty funny seeing all of these boxes like "WTH are we gonna do with that many shirts?". Anyhow, pics to follow on these too. I just came in from the shop, its cocktail and and a pillow for this old hillbilly as this has been a rough week.
Have been working with our WebDev sprucing up the site, we still need to work out some inventory management stuff for being able to list products better and still have inventory control like size/color options for t shirts. One would have thought this would be built in??? Anyhow once we get these things sorted I have tons of stuff to add to the site and hopefully all of this will commence week after next on our return.
Remember, any orders after Wednesday will stack and start shipping the following Wednesday.
We will do a little casting gifts though as it has been awhile. Lets say from this post until we get back from VapeStock all posts in this thread will be entries. When we get back I will do a random thing and pick a bunch of posters to send goodies to.
Been using one of the Pawns today, got those and the Rooks and the Bishops should be in Monday or Tuesday. The mouth feel on the Pawn is different for me as my favorite style is like the Rook but I am diggin the looks of it and it fits the 1/2ling awesome, fitted to a Smok ZMAX Mini its a pretty sweet package.
Other packages showing up today were boxes and boxes of T Shirts. The Offspring is sorting and folding them now... lol, it was pretty funny seeing all of these boxes like "WTH are we gonna do with that many shirts?". Anyhow, pics to follow on these too. I just came in from the shop, its cocktail and and a pillow for this old hillbilly as this has been a rough week.
Have been working with our WebDev sprucing up the site, we still need to work out some inventory management stuff for being able to list products better and still have inventory control like size/color options for t shirts. One would have thought this would be built in??? Anyhow once we get these things sorted I have tons of stuff to add to the site and hopefully all of this will commence week after next on our return.
Remember, any orders after Wednesday will stack and start shipping the following Wednesday.
We will do a little casting gifts though as it has been awhile. Lets say from this post until we get back from VapeStock all posts in this thread will be entries. When we get back I will do a random thing and pick a bunch of posters to send goodies to.
Good to hear JP, VapeFest Vegas is in September. Next week is VapeStock and in Florida and VapetoberFest is in October of course and in Long Beach. We hope any of our customers who are near any of these or just want to take a trip come by and say hello.
As far as the 19mm SS, wow is that a popular setup! The 22s are coming on strong but we have shipped so many thousands of the 19s as they are what we began with coming up on a year ago. One of my favorite daily tanks is a 19 XL that is usually on an Opus but the 1/2ling has been getting good air time lately as I am trying to wear out this Mini Cartomizer, have to be 20 to 30mls through it and it just seems like it wants to keep going.
Oh, and wanted to note to the above mention on the Pawn. Being so short and the shortness of the Mini it warms up especially when chain vaping, wanted to mention that as some will like that aspect as it presents a different vape.
As far as the 19mm SS, wow is that a popular setup! The 22s are coming on strong but we have shipped so many thousands of the 19s as they are what we began with coming up on a year ago. One of my favorite daily tanks is a 19 XL that is usually on an Opus but the 1/2ling has been getting good air time lately as I am trying to wear out this Mini Cartomizer, have to be 20 to 30mls through it and it just seems like it wants to keep going.
Oh, and wanted to note to the above mention on the Pawn. Being so short and the shortness of the Mini it warms up especially when chain vaping, wanted to mention that as some will like that aspect as it presents a different vape.
Hope to see you folks here in Vegas.
Looking forward to seeing pics of the DTs.
- Andy
Looking forward to seeing pics of the DTs.
- Andy
hey OCD, i recently got one of the killer 705 clones, and the thing is rediculous long, i don't have a hard measurement just yet, but is there any way that i can potentially order one of your 22mm tanks in a longer length than your usual XL length if i put my calipers to it for you?
edit: i'd still be using the standard issue caps you send with it, i'm just wondering about the length as the terminator sticks out the top of your normal length XL tanks
edit: i'd still be using the standard issue caps you send with it, i'm just wondering about the length as the terminator sticks out the top of your normal length XL tanks
All of our tubes are available under the custom cut to length. I know it is kind of a pain and a bit more expensive having to buy 3 and the price per each higher than out cartomizer tank tubes but the reason we are able to offer those tubes at that price ($6.00) is because we make thousands of them every month. When we have to set up and cut one (or three) tubes of a given custom length I have to account for setup time for that one short run.
Best thing to do would be to organize a co-op of sorts if this new device is something a lot of folks want glass for. It doesnt even have to be a collect the money sort of thing for a big buy but if you could get commitments for 100 tubes, heck even 50 tubes at a given length and size I would make them and put them on the site. Problem is one person will measure and want 1.750" the next will want 1.755" and the next 1.760" and plus or minus half a hundredth probably wont bother anyone on these so getting folks together on a number for a device would mean I could make them in short run qtys rather than one offs.
Best thing to do would be to organize a co-op of sorts if this new device is something a lot of folks want glass for. It doesnt even have to be a collect the money sort of thing for a big buy but if you could get commitments for 100 tubes, heck even 50 tubes at a given length and size I would make them and put them on the site. Problem is one person will measure and want 1.750" the next will want 1.755" and the next 1.760" and plus or minus half a hundredth probably wont bother anyone on these so getting folks together on a number for a device would mean I could make them in short run qtys rather than one offs.
very nice! If a coop ends up happening for these then I'll definitely put the buff in their ear...however, expect at least an order from me for a couple custom cut pieces
Sent from my EVO using Tapatalk 2
I am looking forward to the tiny tank. What are the dimensions? I am also interested in the Halflings. I see that the shorty carto does not come pre-punched. Does anyone know where I might find this, or can suggest a fool (me) proof carto punch?
Does anyone know where I might find this, or can suggest a fool (me) proof carto punch?I am looking forward to the tiny tank. What are the dimensions? I am also interested in the Halflings. I see that the shorty carto does not come pre-punched.
https://www.ibtanked.com/accessories/tool/carto-punch-detail
- Status
Similar threads
