e-smokeguru official thread
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Is it sad or am I just a GG freak that I had my ESG order with my two new GGTSes diverted from my home to the hotel I will be staying at in San Diego for the next two and a half weeks.
Sent from beyond the vaporsphere.
Sent from beyond the vaporsphere.
my last order including brass GGTS, titanium wires, 2nd estirigon and other fancy stuff was received today at office ... unfortunatly I forgot to check the status before leaving office ... anyway, Kudos to ESG for the fast shipping 
Yes, i forgot...
this time it took Vassilie and FedEx one day from shipping notice to delivery at my doorstep...
big thx to hole esmokeguru team !!!
Stan
this time it took Vassilie and FedEx one day from shipping notice to delivery at my doorstep...
big thx to hole esmokeguru team !!!
Stan
I am very happy that the most people receive the orders very fast
I wait of you opinion about the new titanium wires friends
I wait of you opinion about the new titanium wires friends
My package will arrive today as well! Will be putting those new wires in my iatty today!
My new Penelope V3 and V2 parts are out for delivery! I was a wee bit worried because they languished in Memphis almost a full day. I was afraid the package was being man handled by customs. But it made it out and is on it's way!
I am very happy that the most people receive the orders very fast
I wait of you opinion about the new titanium wires friends
My order came really fast ( fedex option ) as usual less then 24 hours . All perfect as expected . Thank you very much
.I ordered also ESG , pre made, Ti wire , to give it a try . The 1,5 ohm . So first thing I did ( that was Tuesday morning ) , I built a new coil on my Pe v3 using the same bit I use to wrap my coils ( 2mm. bit , 7 wraps no R part ), just cleaned the wire with a bit of alcohol before i wrapped the coil . My ohmmeter reading is 1,4 - 1,5 ohm . Wicked with same amount of .... cotton , same juice ( 100 % flavorless VG 12 mg. nic. the only juice I use , since I found my self allergic to PG since I started vaping 2 years ago already ) . Using Pe v3 with esterigon with fully charge batt . My first impression and most noticeable was for the taste . AS i mentioned before , Im using 100% flavorless VG. I find the taste really neutral now . No more that sort of slight spicy or metallic taste I was used to ( kanthal A1 32 gauge ) . It was the kanthal giving this taste ? ( I have to add that I never torched wire for building my coils ) . The vapor production is more or less the same . The Hit is slightly better , well , it's like the nic is stronger , still my throat feels better, no harsh at all yet. I didn't change the wick yet so I can't add more for the moment . Two refills for the moment , still stable and same ohm reading .
So my first impression is 100 % positive . The only cons I'm thinking of at this moment is the wire gauge , due to the low resistance of Ti compared to kanthal . The pre made 1,5 ohm Ti wire provided is 0,18 mm. right ? I'm concerned because, I remember you mentioned that you will have Ti R only wires but thinnest will be 0,25mm . I think that for my ohm setting preference the maximum would be 0,20 mm or 32 gauge . Well ,if you could provide the 0,18 Ti R only wire Thats all I need !
. I have the feeling that this, is overall, a big step ahead . Thanks again .
With thinner wires you lose flavor. I advise you to make more wraps or bigger diameter to get your resistance with the 0.25 or even better 0.32mmMy order came really fast ( fedex option ) as usual less then 24 hours . All perfect as expected . Thank you very much
I ordered also ESG , pre made, Ti wire , to give it a try . The 1,5 ohm . So first thing I did ( that was Tuesday morning ) , I built a new coil on my Pe v3 using the same bit I use to wrap my coils ( 2mm. bit , 7 wraps no R part ), just cleaned the wire with a bit of alcohol before i wrapped the coil . My ohmmeter reading is 1,4 - 1,5 ohm . Wicked with same amount of .... cotton , same juice ( 100 % flavorless VG 12 mg. nic. the only juice I use , since I found my self allergic to PG since I started vaping 2 years ago already ) . Using Pe v3 with esterigon with fully charge batt . My first impression and most noticeable was for the taste . AS i mentioned before , Im using 100% flavorless VG. I find the taste really neutral now . No more that sort of slight spicy or metallic taste I was used to ( kanthal A1 32 gauge ) . It was the kanthal giving this taste ? ( I have to add that I never torched wire for building my coils ) . The vapor production is more or less the same . The Hit is slightly better , well , it's like the nic is stronger , still my throat feels better, no harsh at all yet. I didn't change the wick yet so I can't add more for the moment . Two refills for the moment , still stable and same ohm reading .
So my first impression is 100 % positive . The only cons I'm thinking of at this moment is the wire gauge , due to the low resistance of Ti compared to kanthal . The pre made 1,5 ohm Ti wire provided is 0,18 mm. right ? I'm concerned because, I remember you mentioned that you will have Ti R only wires but thinnest will be 0,25mm . I think that for my ohm setting preference the maximum would be 0,20 mm or 32 gauge . Well ,if you could provide the 0,18 Ti R only wire Thats all I need !
I have the feeling that this, is overall, a big step ahead . Thanks again .
Thanks Aal ..
I know what you mean I tried in the past with 0.32 mm. ( kanthal off coarse ) and 0,25 as well , too many wraps to reach my favorite 2 ohm setting , considering that I don't wrap coils tight mean touching coils . I like separated coil wrap , works well for me and really convenient for cleaning . Every time I change wick and wash ( max. three days ) i just wash with warm water and soap using and old tooth brush , thats my cleaning method ever since I started building my coils . So with Ti wire 0,25 mm. with half the R of Kanthal that will go to a very long coil to reach my preference ohm setting , even if i go down to 1,5 ohm which I still like . Off course the truth is that i'm no really particular about flavor , because of what I explained above , I use flavorless 100% Vg . Im used to it already and it satisfies my puffing and nic. habit . Next step will be dropping down to 6mg. nico strength . Two years since i quit analogs I will try any way with 0,25 Ti as soon is available , yes as you suggested I'll try wrapping with a 2,5 mm. bit instead of the 2mm. I use . Still I 'm afraid that it will take a lot of coils . thanks again I understand what you mean. Why don't you try dual coils in series then. You wrap a long one then split it, bend it, this way you will get what you want. Give it a try.Thanks Aal ..
Thats an idea ... Have you tried that kind of setup ? Yes I can make a 1 + 1 ohm in serie coil . Over and under set ? Amps will remain the same , but volts on R1 will be different then R2 right?
I haven't tried it but seen it before many times. I hope you have enough space. Over and under or right and left doesn't matter. Volts will be different but don't look at them as 2 separate coils. The overall power is the same. You can wick them with 1 wick and not 2. You will have a small piece of wick that is covering the non coiled wire between the two.should be fine. A guy called dice does it on the kayfun but as a vertical coil. Calls it the double barrel.Thats an idea ... Have you tried that kind of setup ? Yes I can make a 1 + 1 ohm in serie coil . Over and under set ? Amps will remain the same , but volts on R1 will be different then R2 right?
Haven't had a chance to look at the site in a couple of days. On my way home now. Does ESG have the small plastic for Esterigon buttons or are they coming soon? Mine is dead. Thanks.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- Status
