e-smokeguru official thread

[ManniGfaltig]

Hi Stan, and Man...
Thanks for this/these words.
Unfortunately, the complete list is not (all) available. I could've lived without the 510 adapter is it'll be sitting on a JGG if I can get it organised. Just can't bring myself to order "most" of the parts, and hope to get the balance later - with extra postage and so on...
Still - thank you...

As far as I can see only the steel window and the upper body part is missing. Someone with the Update part needs to confirm this but as far as I can see you should be able to build an Mini Mode Ithaka (without upper body).
On the other side I found the upper body part being available at COV so with a bit of additional postage fee you will get a full mode "Update" Ithaka. When I think back how much postage fees I paid in the old times to get a missing part cause it WAS available somewhere in the world...
But of course its understandable if you refuse to do so - then go with the mini!

@Stan . sorry I didn't see your post. Can you confirm if the Update part will also work in a mini Ithaka (i.e. without upper body)?

 

[imeothanasis]

esmokeguru will have the missing parts in about 2-3 days guys

 

[Uno mas]

Uno mas, you mean the jgg full ad cap on a stealth?

Gesendet von meinem SM-N9005 mit Tapatalk 2

Naw I pieced together a Stealth, Just GG tube, Just GG Brass Telescope, GGTS Bottom Cap and GG Stealth Connector Steel Full

 

[D Stanley Querfurth]

As far as I can see only the steel window and the upper body part is missing. Someone with the Update part needs to confirm this but as far as I can see you should be able to build an Mini Mode Ithaka (without upper body).
On the other side I found the upper body part being available at COV so with a bit of additional postage fee you will get a full mode "Update" Ithaka. When I think back how much postage fees I paid in the old times to get a missing part cause it WAS available somewhere in the world...
But of course its understandable if you refuse to do so - then go with the mini!

@Stan . sorry I didn't see your post. Can you confirm if the Update part will also work in a mini Ithaka (i.e. without upper body)?

Yes and NO- it will work but you can´t open the liquid control fully !!!
greets
Stan

P.s.: 2-3 days is Imeo´s new service for his customers- i like it very much !!!

 

[Dontknow]

Thanks again guys.
As Imeo says the upper body will be in in a couple of days - I'll wait for that part, and complete the order then.
Many thanks again for your help on this...
I'm impatient to get this done... Just a couple more days...

 

[billypapa]

Hi friends i wish you all merry christmass
Today and tomorrow i will rest a little bit with my family and after this 2 days i will return with full bateries for all of you

 

[somopoppy]

I need wires not batteries

 

[billypapa]

Dear E-SMOKEgURU,

thank you very much for the good work. New rebuildable part arrived today, with all the rest parts...


Stan

Thank you Stanley i wish you all the best !

Vasillis, I just wanted to wish you and your family a very Merry Christmas and a Very Happy New Year!!

Thank you very Jojobo, i wish you too the best for thr new year

Vassillis, I do not know why my message to the shop there is no in my Customer notes.
"I very please you about the connection of my orders: Order # 7952 and Order # 8425 and Order # 8483.
I want PayPal and FedEx.
Please read the e-mail from me:"Fwd: RE: Papakonstantinou Kalomira e-smokeguru: Order #8425Η παραγγελία σας καταχωρήθηκε επιτυχώς"."

Dont worry it is all under control i have combine all your orders

I finally found a few minutes this morning to build a coil on the update and drop it in an Ithaka. Fast and easy to place a micro coil and vapes extremely well. Thank you Vasilis for the fast shipping and the patient answers for a newcomer to your store. And thank you Imeo for the upgrade!!!

I need wires not batteries

Hi Housemouse,
thank you very much.
And dont worry the GG family will help you with all your questions

 

[simon.]

Naw I pieced together a Stealth, Just GG tube, Just GG Brass Telescope, GGTS Bottom Cap and GG Stealth Connector Steel Full

Ok, i did it two times - i like that stealth look really much

Gesendet von meinem SM-N9005 mit Tapatalk 2

 

[billypapa]

Hi friends,
i will inform you that i have online again:

Ithaka
Ithaka upper body
Ithaka engraved tubes
Ithaka Steel windows

Just GG Brass full old Alloy (for the first time complete Device )
Just GG , GGTS , Stealth Buttons SS & Brass
Brass heads
SS Heads
and all the parts for just gg

Penelope V2 (full device)


Thank you
Vassilis

 

[Uno mas]

And that's what I was waitin' for

 

[Itshak]

Vasillis buddy
I hope you rest enough,
A bombarding raid is on the way.
Ha ha

 

[D Stanley Querfurth]

Dark Lord of Clouds-> ITShak

you are vorbidden to Order anything until tomorrow evening, because when your order is done there is not enough left for the rest of the GG family LOOOOOOOOOOOOOOOOOOOOOOL
p.s.: thx for the Pm about this

Vasillis buddy
I hope you rest enough,
A bombarding raid is on the way.
Ha ha

 

[Bobster]

No brass axis?

 

[billypapa]

Vasillis buddy
I hope you rest enough,
A bombarding raid is on the way.
Ha ha

Itshak i realy thought i was ready, but not for this bombarding from you
Friends he roped the shop !!!

 

[billypapa]

Friends next week we will have the direct paypal payment option avaliable and i am sure this will be easy for everyone

 

[king.]

hi Vassili
in my last order 8231 you send me wrong item i oder GGTS Brass Venting Cap Old Alloy but i got the justgg old brass Brass Venting Cap and i have no other parts to compleat Justgg Venting Cap and only one more question the brass tube engravings are not in center with the button is this a mistake or its like this

thanks andreas

Gesendet von meinem iPad mit Tapatalk HD

 

[Electraglide1]

My old brass engravings are also not centered with the button. Noticed it yesterday & decided I could live with it but had to scratch my head & wonder. I need the old brass venting cap complete to finish mine as well.

 

[wverweij]

My button in the old brass engraved tube isn't centred either, I don't mind

 

[imeothanasis]

engraving isnt always centered (maybe 1 mm off), because engraving is done by hand guys. You cant see this on other mods because their button is on bottom