e-smokeguru official thread

[Itshak]

The stealth cap for me is just for connecting Ithaka or Ody with Ithaka 510 base with the new slick air ring.
Sharp edge are the perfact for that.

I think also that the curve look better but only when there is no atty above,or the atty is smaller,
that will not be the case for me.

All my fat GG mods are married to GG fat atty.

 

[Otello]

Yes, Itshak, i agree that for building the full brass with Ithaka 510 base, the sharp edge is better.
On my side - ehm, Imeo please don't read - I made the full brass using a GM collecor tank, so I use the stealth cap mostly with the Kraken, which is 22 mm.

 

[Itshak]

I didn't see it mentioned in a clear way so I'll ask:
Are the internal parts of stealth cap can fit on 4 in 1 cap???
If so maybe it's a solution for you Otello?

 

[Otello]

I think the inside of new stealth do not fit in 4in1 cap; maybe the old stralth one do? (I've never tried)
But, fact is I have nothin against 4in1 inside piece...
The problem is I cannot ask to make the Stealth cap identical to 4in1 (as it's a collector item, bla bla bla), so: same external shape but different inside...

 

[imeothanasis]

Its, 4 in 1 cap is 4 pieces:

cap
connector
inside pieces, exactly the same as GGTS

I didn't see it mentioned in a clear way so I'll ask:
Are the internal parts of stealth cap can fit on 4 in 1 cap???
If so maybe it's a solution for you Otello?

 

[RandomFellow]

Forgive me for asking, but why would you rather use the Ithaka 510 adapter rather than screwing it into the collector base using the GG threads?


Sent from my iPhone using Tapatalk

 

[Itshak]

Edit:

I see Imeo already answer
Stan you have some more info for the GG compatibility thread

 

[Aal_]

Let me put this clearly. You have 4 in 1, old stealth cap and new stealth cap.

4 in 1 was produced in SS (still available at CoV by the way) and in old brass(the collectible item)
It consists of cap internal 510 negative and internal Positive pin and plastic which (i think) is the same pin and plastic of ggts connector.

The old stealth cap was rounded edges and consists of cap that has the negative built in and a positive small pin same as ggtb and a plastic.
It was produced in SS and brass but imeo discontinued the brass since threads of negative in brass wear off quickly(this is my unicorn now but I'm settling to the below, buying used one will already have threads worn so I made up my mind )

New stealth cap has 3 pieces cap internal negative in SS and internal pin.
It was produced in SS and new brass and imeo said he will be making old brass stealth caps for which I'm settling.

Does the internals of new stealth fit 4 in 1? I dunno. I have both in SS should I try? Let's see how the night goes

 

[Aal_]

I just read the above posts I was writing. It seems I should try it. Brb.

 

[Itshak]

yes aal when you can better to try.
Just wanted to solve something for Otello and to find out for better knowledge.
I going kick the gas on the old brass stealth cap,I prefer it as my attys are all fat
And the thin one (Pene v2) are for proteus.

 

[Itshak]

Forgive me for asking, but why would you rather use the Ithaka 510 adapter rather than screwing it into the collector base using the GG threads?


Sent from my iPhone using Tapatalk

Only for those special times you want full old brass look mod

Personaly it's just for the optional as I like the SS CT with air ring the same as the mod.
But some do prefer all mod look uni Brass

 

[Itshak]

Its, 4 in 1 cap is 4 pieces:

cap
connector
inside pieces, exactly the same as GGTS

Thanks Imeo

So here Otello you have a solution to what you wanted (I think??)
You have internals of GGTS so you can fix this old 4 in 1 internals lol and have the curves ha ha

 

[Aal_]

Mission failed miserably. I wasn't able to Disassemble the negative of new stealth caps. I scratched The hell out of the insides. Imeo are these glued or welded? They seem like it. They didn't even move. Anyway the positive alone is for sure a no go since 4 in 1 uses threaded and stealth uses orings and different opening dimension because of the plastic. So that's that.

 

[Aal_]

Thanks Imeo

So here Otello you have a solution to what you wanted (I think??)
You have internals of GGTS so you can fix this old 4 in 1 internals lol and have the curves ha ha

No it doesn't work. The negative 510 is not available. Read my post. The internals are the positive.

 

[Corona Doble]

Forgive me for asking, but why would you rather use the Ithaka 510 adapter rather than screwing it into the collector base using the GG threads?


Sent from my iPhone using Tapatalk

(because when you have more than 4 jGG in all versions of steel, brass(es), tutone and steel accent, you are please to have various connector to match your different Ithakas : orginal hybrid jGG tank and lid but also the Stealth ones in steel and new brass. Not only for 'knurled style' , the brass Stealth connector allows you to use also the new Ithaka brass CR ring with the 510 base wich is, visually, a great setup).

 

[Otello]

Thanks Imeo

So here Otello you have a solution to what you wanted (I think??)
You have internals of GGTS so you can fix this old 4 in 1 internals lol and have the curves ha ha

Yes Itshak, but my real problem with 4in1 is I'd like to buy more than he wants to build!
(I need them for the brass chess army )

 

[Itshak]

No it doesn't work. The negative 510 is not available. Read my post. The internals are the positive.

Ok I see.
Buy the way I disconnect those few time no problem.
I use a big screw driver from above on the slots of the negative.
I hope u didn't try to hold it from above and open the nut from below lol it's a one part.

 

[ManniGfaltig]

Mission failed miserably. I wasn't able to Disassemble the negative of new stealth caps. I scratched The hell out of the insides. Imeo are these glued or welded? They seem like it. They didn't even move. Anyway the positive alone is for sure a no go since 4 in 1 uses threaded and stealth uses orings and different opening dimension because of the plastic. So that's that.

I tried it for. The answer is no - it doesn't work. The Stealth's connector part is bigger than that of the 4 in1 cap. With regards to your problem - I have a set of various nuts and they are very usefull.

You can better apply your force and don't scratch your GG by using them!

 

[Aal_]

Well since you tried it and since I don't have those unnecessary until vaping things I think I will pass

 

[Itshak]

No it doesn't work. The negative 510 is not available. Read my post. The internals are the positive.

The positive center post only with it's O rings of the stealth cap
Can't be stuck inside the 4 in 1 fixed negative?? Instead of the long shaft center post
If we leave the brass threaded delrin? It's a different diameter ?? The inside of the threaded delrin vs the inside negative of the stealth??