Not bad, but I prefer Fedex, although I live in Germany, the home of DHL. DHL is sometimes very slow...16 hours with Fedex from Greece to Germany they can't beatHi Friends,
i have some good news.
We have add a new Shipping Method, it is DHL Express International Shipping.
I think the most of you know the international courier DHL.
After long time of negotiations for the best prices, we are able to send from now on to almost every country with very good price condition
I try to explain you with some examples:
Fedex is very good to send packages to USA and EU countries, but if we want to send with fedex a package outside the EU for example Australia, Japan,
Mexico, Switzerland and many others the prices are to high. For example Australia over 30 Euro or Japan over 40 Euro.
With DHL Express shipping we are now able to have special prices and for example from now on sending express international to Japan the price is only 14.60 Euro.
Or Australia only : 15.50 Euro
For Europe countries in the most cases the price is 12.30 Euro
And in the most countries DHL has more delivery centers.
So from now on you can choose what shipping method is the best for you
We stop sending with normal Post mail because you cant track the packages correct and the delivery time is to long.
We send with Post only to our customers in Russia because of the problems with all couriers.
Of course the small packets shipping method 3 Euro without insurance and tracking for orders until 40 Euros stays because many customers love to have this method to order little spares without paying to much shipping cost.
Thank you and i hope with this new service you will be more satisfied.
Vassilis
e-smokeguru official thread
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Insulator is not needed Phil and center post plastic is ready and I will send it to e-smokeguru in about 3 days
Hi friends,
we broke a new record and i am very happy
My team and me manage to dispatch over 350 orders in only 1 day and send them out to you
I hope all of you will receive your orders very fast.
I want to thank my team because they have all passion for the Job.
And of course i want to thank you all for your huge support !!!
Hi Billypapa i would like to also thank you and all your team for the fantasic effort in getting orders out to us. I ordered on monday 17.30 (gmt) and they arrived thursday at 10:00 (gmt) look forward to my next orders
Alan
Same happen to me.
okay, germany is a little bit closer
but the performance is unbeatable.
thanks vassili
Also from me Vassili, a big Thank Yooouuuuu for once again great performance of customer service.
You're the best!!!
You're the best!!!
Insulator is not needed Phil and center post plastic is ready and I will send it to e-smokeguru in about 3 days
Awesome Imeo, is it ok if I use the o-rings from the tilemahos or are their sizes specific to the Ithaka update?
My shipment is stuck in customs at Newark. Fedex sent me an email saying "Shipment Require A Commercial Invoice"
I just want my penny v4
I just want my penny v4
Very fast delivery and very good service (as always) Vassili!
Welcome Tilemahos 22 mm matt matching perfectly the GG4S
...and welcome Penelope V4 finally accompanying my beloved P3 (short mode)
Only bought GG in the last 7 months (of my 10 months vaping career), your creations are just too good (and beautiful) Imeo
Welcome Tilemahos 22 mm matt matching perfectly the GG4S
...and welcome Penelope V4 finally accompanying my beloved P3 (short mode)
Only bought GG in the last 7 months (of my 10 months vaping career), your creations are just too good (and beautiful) Imeo
Got my order from ESG yesterday morning fast as usual with fedex . All ok and really happy with all.
Pe V4 mini ; again a peace of art . I like the new sealed feature with the all in one adjustable pin , polished SS pin with max. diameter really makes a good contact.
I find the draw a bit better then on Pe V3 ( more stable ) .
All insides in SS now , which I really like . No inside brass parts that tarnish fast , that will give in time a typical brass spicy taste? So very convenient to easily keep clean and of course no more liquid on mod. So I just have to wash atty and only wipe contacts of mod . Now I use GG4s direct contact atomizer cap with practically no voltage drop. With Esterigon works better as well contact points always dry and clean .
Got the AD base for Tilemahos V1 as well , with corresponding SS pin upgrade and yes now is perfect ! I find the draw , same as with Pe V4 , more stable .
So definitely I believe that sealed attys is the way to go , as for the all SS inside parts.
Got also from ESG the new " Eleaf" lcd digital Ohmmeter and Voltimeter , just for convenient testing on load , with out messing up to much . I have a good multimeter , calibrated " Fluke " digital multimeter so i could contrast precision of some readings and yes , this little thing is precise and very friendly to use . Reads volts , ohms and Wats on load in fast sequence , nice . For example , I checked very fast performance of all my batteries . Found couple off them which i already suspected that were not working well , now fully charged got the reading of a very significant voltage drop.
Thanks Imeo for making GG better and better , Thanks Vassillis for your excellent service and thanks to everyone here on this forum .
PS. BTW I found out a curious reading testing ohms on load with the ESG TI wire . Resistance build is 1,6 ohms and when on load ( while vaping ) goes up to 2,1 ohms ( stable at that point ) . I suspected this was happening , even read on threads that this was happening . Now I understand why with Kanthal my sweet spot was at 2,1 ohms and I had to go down to 1,6 ohms with the Ti wire build to have the same result.
Pe V4 mini ; again a peace of art . I like the new sealed feature with the all in one adjustable pin , polished SS pin with max. diameter really makes a good contact.
I find the draw a bit better then on Pe V3 ( more stable ) .
All insides in SS now , which I really like . No inside brass parts that tarnish fast , that will give in time a typical brass spicy taste? So very convenient to easily keep clean and of course no more liquid on mod. So I just have to wash atty and only wipe contacts of mod . Now I use GG4s direct contact atomizer cap with practically no voltage drop. With Esterigon works better as well contact points always dry and clean .
Got the AD base for Tilemahos V1 as well , with corresponding SS pin upgrade and yes now is perfect ! I find the draw , same as with Pe V4 , more stable .
So definitely I believe that sealed attys is the way to go , as for the all SS inside parts.
Got also from ESG the new " Eleaf" lcd digital Ohmmeter and Voltimeter , just for convenient testing on load , with out messing up to much . I have a good multimeter , calibrated " Fluke " digital multimeter so i could contrast precision of some readings and yes , this little thing is precise and very friendly to use . Reads volts , ohms and Wats on load in fast sequence , nice . For example , I checked very fast performance of all my batteries . Found couple off them which i already suspected that were not working well , now fully charged got the reading of a very significant voltage drop.
Thanks Imeo for making GG better and better , Thanks Vassillis for your excellent service and thanks to everyone here on this forum .
PS. BTW I found out a curious reading testing ohms on load with the ESG TI wire . Resistance build is 1,6 ohms and when on load ( while vaping ) goes up to 2,1 ohms ( stable at that point ) . I suspected this was happening , even read on threads that this was happening . Now I understand why with Kanthal my sweet spot was at 2,1 ohms and I had to go down to 1,6 ohms with the Ti wire build to have the same result.
Last edited:
Oh my!!! No luck this time, delivery exceptions all the way. Now is stuck at Newark. So maybe for Monday. [emoji30]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sorry to hear, it's never fun when our hotly anticipated gear gets held up, for whatever reason....
...and of course it ALWAYS happens to the gear we are the most excited about
My shipment is stuck in customs at Newark. Fedex sent me an email saying "Shipment Require A Commercial Invoice"
I just want my penny v4
My two packages got hung up too but Vasillis was already on top of it before I even asked about it. The two cleared, one made the next plane and should be at my house soon. The other will be another day which is cool since it spreads out the vapemail.
My shipment is stuck in customs at Newark. Fedex sent me an email saying "Shipment Require A Commercial Invoice"
I just want my penny v4
Dont worry my friend i have manage this problem for you
if you want to use an o-ring instead of center post plastic, better use a 3x1,5 mm Phil
if you want to use an o-ring instead of center post plastic, better use a 3x1,5 mm Phil
I mean the o-rings which are supposed to go around the housing etc.? There is no "Ithaka update" o-rings set on ESG so I was planning on using the tilemahos set instead if they are compatible?
dont put o-ring around housing Phil, its not necessary
Thanks for the info, I was misled by the wiki which stated these parts for the Ithaka update:
1 x O-Ring 14mm x 1mm (around housing)
1 x O-Ring (2mm thick, 8mm outside diameter, 3.5mm internal diameter)
Well received my Tilemahos V2 today with the clear tanks and spare parts I needed once again super fast delivery and great service Thanks everyone at e-smoke for the great service. Have setup the V2 22mm and been Vaping it all day I have to admit I am more than happy with the sealed 510 connection using an old drip tip (2 years old) and the juice control is working great. This setup with GG4S is the best GG for me to date great job Imeo. The clear tank really helps avoid ruining my rayon wick i can see when the juice is almost out and top it up great! Review coming once i gather all info. Next VIR.
- Status
