The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

eBaron Dripper Pro

Discussion in 'ProVari' started by nj1001, Nov 3, 2012.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    I believe that both Scott and Phil show how to prepare a coil for the eBDP.


    - Andy . . . Don't let the Ciggieman getcha . . . Vape'em.
     
  2. Mr.Mann

    Mr.Mann ECF Guru Verified Member ECF Veteran

    Supporting member
    Dec 30, 2011
    All over the place
    Phil uses straight Kanthol, no NR (which is fine, I take it).
     
  3. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    It worked for Phil. However, in his Youtube comments, he did acknowledge that the original wick set-up had a NR-R-NR wire assembly. Evidently, he did not see the R/NR welds, as they were too small for him to notice initially.

    I have been using 32g Kanthal (R) and 32g Nickel (NR) is all of my ceramic cup type device builds. Adding the NR wire becomes quite simple after a bit of practice. As such, I am not aware of any issues using only resistance wire for these type of devices.

    - Andy
     
  4. Mr.Mann

    Mr.Mann ECF Guru Verified Member ECF Veteran

    Supporting member
    Dec 30, 2011
    All over the place
    It would make it a tad bit easier of a set-up I suppose, but I haven't tried it.
     
  5. Kataphraktos

    Kataphraktos Vaping Master Verified Member ECF Veteran

    May 1, 2013
    New York, NY
    I'm using 32g Kanthal and 3mm Ekowool (a single strand, no loop) and it works fine. I suspect the R/NR would help to lower resistance, but for my purposes - about 1.8-2.2 ohms - resistance wire alone works perfectly.
     
  6. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    Did you need to file the wick slots to fit the 3mm ekowool? What is 3mm eko compared to regular silica, some 5mm?


    - Andy . . . Don't let the Ciggieman getcha . . . Vape'em.
     
  7. Kataphraktos

    Kataphraktos Vaping Master Verified Member ECF Veteran

    May 1, 2013
    New York, NY
    I didn't file anything. I don't loop it like the normal eBDP wick setup - too tight with 3mm Ekowool. I use a single strand, one tail comes out of one side of the ceramic and loops around, the other tail comes out the other side and loops around the other way.

    I have no reference, but I suspect 3mm Ekowool is about 4mm silica.
     
  8. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    Need to get some 3mm ekowool. I have been using 1, 1.5, 2mm ekowool, 3mm german silica, and the standard 2mm silica for my devices.

    - Andy
     
  9. Kataphraktos

    Kataphraktos Vaping Master Verified Member ECF Veteran

    May 1, 2013
    New York, NY
    Some items I do not hesitate to buy in bulk sight-unseen, like the masses of Ekowool in multiple sizes I've gotten off of Ebay. Those sell in nanoseconds in the Classifieds if one decides not to keep them.
     
  10. bydus

    bydus Super Member Verified Member ECF Veteran

    Jun 8, 2011
    UK
    i've been using ebaron dripper pro for few days and its best vape i've ever had! Modder who made this if you are reading please please please make a ebaron maxi with a wider cup so we can toss more wick in there or foam so it can hold 30 - 40 drops o eliquid! :D
     
  11. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    Ahhh, enjoying the ball game with my eBDP. Now, only if my team could manage to string together a handful of wins.


    - Andy . . . Don't let the Ciggieman getcha . . . Vape'em.
     
  12. chadsmo

    chadsmo Vaping Master Verified Member ECF Veteran

    Feb 16, 2013
    BC Canada
    Still loving it I see ? I'm enjoying my term-c. Dead simple to setup and it vapes well and the large capacity is great , but my eBDP beats it hands down in vape quality.
     
  13. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    Ditto on both accounts.

    - Andy
     
  14. professeur

    professeur Full Member Verified Member

    Jun 20, 2013
    Athens, Greece
    New owner for the dripper pro.

    Really excited by the result. Precise machining on a tiny devise. Minimal design which works flawless.

    The only minus for me is a little bit hot vape for my taste, but probably is something more general at dripping..

    Some photos:

    With the drip tip "Lips" on it:

    [​IMG]

    With a plexy glass drip tip , bullet shape:

    [​IMG]

    Beside Protank:

    [​IMG]

    All the parts:

    [​IMG]
     
  15. kas122461

    kas122461 Vaping Master ECF Veteran

    Jun 15, 2013
    Indiana, USA
    I have a question, if one of these, falls over with the juice in it, will the juice flow out? I have never had anything like this before, does the tip prevent spilling? This thing just looks prefect, for what I just ordered, it looks like it holds less juice, then the pro tank but very well built. I think it would be safe to say, it could survive a drop to concrete better then the pro tank.
     
  16. professeur

    professeur Full Member Verified Member

    Jun 20, 2013
    Athens, Greece
    Most of the juice is "inside" the wick so i suppose there will be no problem with a drop. I've no read any leakage from owners for months.
     
  17. kas122461

    kas122461 Vaping Master ECF Veteran

    Jun 15, 2013
    Indiana, USA
    So with one of these you don't fill up a tank, like the pro tank, you just drip a few drops to get the wick wet, is that correct?
     
  18. MDV39

    MDV39 Ultra Member Verified Member ECF Veteran

    Dec 21, 2012
    New York
    correct drip hit hit hit drip hit hit hit enjoy....theres no tank its just wick and coil
     
  19. kas122461

    kas122461 Vaping Master ECF Veteran

    Jun 15, 2013
    Indiana, USA
  20. eratikmind

    eratikmind Vaping Master Verified Member ECF Veteran

    I carry mine in my pockets. I lay it on the couch. I have only had mine for about a month's time and it has never leaked nor disappointed me with its performance.

    - Andy
     
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice