eGo-T Vs Go-go

Status
Not open for further replies.

mohawkx

Ultra Member
ECF Veteran
Mar 14, 2011
1,260
499
arizona
Yes the old ones from Nhaler are brass and wrapped. The ones from Cig Easy are stainless and powder coated

Hah! You must have gotten the limited edition, signed by the artist ones from Nhaler. both the black wrapped and the stainless ones I got are white metal at the batt end, from them. No prob. They all work great for me.
 
Hah! You must have gotten the limited edition, signed by the artist ones from Nhaler. both the black wrapped and the stainless ones I got are white metal at the batt end, from them. No prob. They all work great for me.

ROFLMAO...doubt Drew signed them...but they sure are pretty! But then so are my Cig Easy's. I have both to go with all my jewelery! lol lol Well, not really..I don't have anything stainless....will platinum work? lol lol
 
would you post a picture of the brass cartomizers?
Picture.jpg now I'm not sure...but it's not the same color that's for sure! lol
 

Ceegary

Ultra Member
ECF Veteran
Verified Member
Mar 20, 2011
1,156
675
Phoenix
Actually - the 10-15 drops are exactly why I'm looking to pick one of these up along with a pack of KR808 Cartos - Since I don't have any other PVs this will be a great way for me to try out new juices / juice combinations without filling an entire 3ml carto :)
This is great news! Firstly,there are now adapters available for the Go-go, will open up wider interest. In fact you could double up adapters and go to anything now.

Secondly, it does allow for using the Go-go bat for testing, much cheaper than buying a whole other system for those who don't have one. With the long life on the bats that shouldn't be an issue. Love to hear a report from the first to try this.
 

sandiego

Full Member
Jan 6, 2011
63
38
Chicago, IL
OK Kids, time for me to chime up on this defective carto talk 'cuz boy I've got some experience there! When I first ordered my go-go kit (like on page six of this now monsterous thread!) all was well, except I had the notorious center stem problem, but my cartos worked fine. When I reordered (the new silver ones), ALL ten, yeah that's right, all ten were bad and I sent them back to Nhaler. I rec'd some black ones back this time. I popped them on and they didn't work either. I was not happy and me having some serious nicotine withdrawal at this point wasn't helping the situation!! Anyway, Drew was having a very hard time believing that this was for real (as I was!) and after a day of me pondering the problem I decided to pull up on the stem to make connection with the battery. When I first tried this it didn't work. When I tried again the next day, it did. Apparently, I hadn't pulled up on the stem enough. I wrote Drew letting him know what the problem was so that he could inform his customers if they experience the same problem. He was kind enough to send me a couple of those pretty silver LR cartos that I had my heart set on for my troubles. I got them yesterday and NO-GO for the go-go. I pulled that center stem practically OUT of my battery and it still is not working. I feel there's a problems with silver ones and even this second generation of black ones for that matter as I never had to pull the stem (yeah, I hear you all laughing) with the old ones.

If anyone wants to ask me questions, best to pm me because I rarely come to this thread anymore.

On an entirely different matter, it really bothers me to see people "bash" a fellow vaper for talking about some trouble he's had with a supplier. That is "his" experience and not yours. If you've had a great experience w/a supplier and had no problems, cheers for you, but that doesn't negate that others have had trouble. It's well known by a LOT of people on this board that Cigeasy has some serious communication problems. If you haven't, again, great for you, but that doesn't negate that a lot of people have, me included. There are certainly a lot of people on this board that are almost afraid of saying anything negative about a supplier. I've had people pm me that also had trouble but they weren't "going public" about it. To each his own. With that said, go have a look at Cigeasy's forum. I've got a complaint lodged there since JANUARY because the moderator moved my post there. Well, I've never heard back from Frank. So when people talk about how great Cigeasy is, there are those of us who haven't had the same pleasure. I truly do think Frank is probably a great guy who is probably just overwhelmed w/the amount of business he had, so I wouldn't bash the man, just his business practice. Personally, I think SSV2 is fantastic to deal with if he's still helping Frank out. But really, next time someone wants to jump all over a fellow vaper for voicing his problem, consider this, you've not experienced that persons frustrations or had their same experience. It's theirs, not yours, don't "bash" them for it.
 

want to quit

Ultra Member
ECF Veteran
Verified Member
Mar 26, 2011
2,252
3,784
Germany/ Atlanta, GA
Ok, lets troubleshoot. Which ones did you get as I just got a delivery today of 20 new gogo cartos from Nhaler. They are all stainless and 10 are 2.0 ohm and 10 are 3.0 ohm. Tell me what you have and I will fill up one of my new ones and see what happens. Also, what method are you using to fill the cartos? Drip, q-tip or syringe? How many drops did you put in? What mix of juice? All these parameters could offer a clue.

haha you again the hero to safe me!! I think I got it but have not tried all of them. I got the 3ohm black empty once from nhaler. All I really did was screw them in to the point where you have to be afraid to brake the unit itself. Not saying nhaler is giving me bad products but after seeing cigeasy's cartos its day and night. Cigeasy's have no annoying sticker on them, come with plastic cap on both the battery side and the filling side and they are ready to go right out of the box. Once again nhaler offered quick support and I am not upset just saying that cigeasy's cartos look way better + no freaking sticker!!!!
 

want to quit

Ultra Member
ECF Veteran
Verified Member
Mar 26, 2011
2,252
3,784
Germany/ Atlanta, GA
Sounds like they were all screwed in too tightly. That is one thing about handling Go-gos that needs to be kept in mind. The cartos really need to be screwed in just to the point where contact is made. Overtightening can push the battery posts to far in and apparently now, can do it the same to the cartos themselves. They can be pulled out, but word of caution, do it very lightly, first time I tried it on a bat I pulled it right out and had to resolder a wire.

funny that you say that because if I put the nhaler carto in "just so it makes contact" then I get no nothing NADA!! I have to screw them in so hard that i am afraid to brake my gogo and only then and I repeat only then the carto will work. I got my gogo from cigeasy btw and have no problems at all with their cartos it all just started when putting the nhaler cartos on the cigeasy bat.
 

want to quit

Ultra Member
ECF Veteran
Verified Member
Mar 26, 2011
2,252
3,784
Germany/ Atlanta, GA
Do us a favor and compare the battery ends of a Cigeasy carto and an Nhaler carto and see if there is a difference in depth for the center post on the bttery to make a connection with the carto. This will help us all and something we all need to know.

Disregard my troubleshooting posts above as you've obviously got the problem fixed while i was furiously typing. Glad you got a fix.

I get my Mark II out and make a perfect picture for you in 20mins to see if their are any differences even though they look pretty much the same to me EXCEPT THIS ANNOYING STICKER!!! Sorry but why in the world do nhalers come with this disgusting sticker i dont get it.
 

jp1000

Super Member
ECF Veteran
Verified Member
Mar 25, 2011
305
865
Arizona
Happy to say I got back from my business trip. This was a real test of the battery as there were ATC delays that caused me to miss a connection flight and had to spend an extra night at a hotel. Having a battery that lasted as long as this one does saved the day as it kept going that evening and during a long layover on the way home the next day. Just have to love the longectivity of this system. Also happy to say that I had no issues at all three airports that I went through security.
 

Devonmoonshire

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2011
6,750
7,969
San Diego, CA
Happy to say I got back from my business trip. This was a real test of the battery as there were ATC delays that caused me to miss a connection flight and had to spend an extra night at a hotel. Having a battery that lasted as long as this one does saved the day as it kept going that evening and during a long layover on the way home the next day. Just have to love the longectivity of this system. Also happy to say that I had no issues at all three airports that I went through security.

Welcome Back jp1000!!! I am very happy to hear your travels went well as far as vaping is concerned, very sorry to hear about te horrible layovers but at least your Go Go Held Out like a Champ and the Security folks were not Jerkwads :D

Nate AKA “Darth Vapor”

 

GoAskAl

Super Member
ECF Veteran
Verified Member
Apr 3, 2011
356
449
USA-PA
I got my GoGo yesterday tested both batteries by pushing the button (both turned blue). I sanded the charger plastic flush and put 1 of the batteries in the charger, it flashed and went to red like it was supposed to. Then I hooked the other battery to the charger to make sure it would go into charge mode. It did so I left it in the charger and began to enjoy my new GoGo. About 2 hours later the bat in the charger turned green so I took it out and put the other bat in. All seemed well the second bat flashed and the charger turned red. About 3 hours later I had to go out so I disconnected the battery from the charger (to have a spare just in case) and left. When I got home I connected the bat I had been using and connected it to the charger to charge over night. I hooked up the fresh bat for the morning.

This morning I started vaping and all was great then about 2 hours later the bat just stopped working mid vape no flashes or anything. So I hooked it to the charger and it flashed and the charger went from green to red then it went to yellow then green within a couple minutes. I unhooked everything and made sure there was contact and nothing had gotten in the fittings. Reconnected and it did the same thing but this time it would go from red to yellow to green to red then to green. It kept doing this. So I took the bat out and clicked the button... nothing... So I clicked it about 5-10 times rapidly and all of a sudden it flashed blue and is working now.

I wonder if this is another case of "the mysterious turning button"?? I will be sending an Email to CigEasy to see if they can trouble shoot and maybe offer some insite into why this is happening. I'll post here when I hear anything. Just thought it might help someone else that might have the same problem.

I just heard back from CigEasy and they are having problems with the volume of Emails. This is what the Email statred off with.

"Due to the current high volume of e-mail at support@cigeasy.com Customer care has recently been upgraded. In order to serve you better, your inquiry has been redirected to our Tech Support department. :)"

So they are trying to get things sorted out and that's good enough for me.
 

want to quit

Ultra Member
ECF Veteran
Verified Member
Mar 26, 2011
2,252
3,784
Germany/ Atlanta, GA
Here some pictures. I don't see anything different between the two, however, the fact that they don't work as well as the cigeasy once is apparent. Maybe if you buy the gogo from nhaler the cartos from nhaler work better and the other way around.


Left carto cigeasy right carto nhaler.

2qxx85z.jpg


33wwsad.jpg


14ui7vk.jpg


3446r68.jpg
 
Status
Not open for further replies.

Users who are viewing this thread