Ejuice calculator (added quantity calculations)

[wjmcspirit]

Let me understand... if I wanna make a zero nicotine mix, that is 100% VG, all i need is VG and a flavor and that's it??? 2 ingredients?

 

[flintlock62]

You may want to add distilled water, or alcohol to thin it down, unless you like it that thick. I would use about 22% between the flavoring and water/PGA. For example, 10% flavor/12% water/PGA, 78% VG.

Let me understand... if I wanna make a zero nicotine mix, that is 100% VG, all i need is VG and a flavor and that's it??? 2 ingredients?

 

[wjmcspirit]

You may want to add distilled water, or alcohol to thin it down, unless you like it that thick. I would use about 22% between the flavoring and water/PGA. For example, 10% flavor/12% water/PGA, 78% VG.

Thank you for taking the time to respond

 

[flintlock62]

You can also get alcohol based flavoring from DIY-Flavoring-Alcohol Base | E Liquid Flavoring-Alcohol Base - E Cig : Best Ejuice | Joye eGo & eGo-T | Boge Leo | Cartomizers | E-Liquid | Electronic Cigarettes. Of course, you will use between 2~5%, and increase the water/PGA ratio. These flavorings are super strong, so don't use too much!

Thank you for taking the time to respond

 

[wjmcspirit]

You can also get alcohol based flavoring from DIY-Flavoring-Alcohol Base | E Liquid Flavoring-Alcohol Base - E Cig : Best Ejuice | Joye eGo & eGo-T | Boge Leo | Cartomizers | E-Liquid | Electronic Cigarettes. Of course, you will use between 2~5%, and increase the water/PGA ratio. These flavorings are super strong, so don't use too much!

Does that mean alcohol based doesn't require water??? confused Thanks for the help.

 

[flintlock62]

I've never tried straight VG, but I think, yes, you'll still need more thinning with water. Maybe someone who uses 100% VG with chime in.

Does that mean alcohol based doesn't require water??? confused Thanks for the help.

 

[dmall]

You may want to add distilled water, or alcohol to thin it down, unless you like it that thick. I would use about 22% between the flavoring and water/PGA. For example, 10% flavor/12% water/PGA, 78% VG.

You have to add 10% distilled water if you use 100% VG. I find that I also have to increase the percentage of flavor as well. The VG mutes the flavors a bit. Of course this is my taste and everyone's is a little different. Hope this helps.

 

[xorgo]

Not sure if i have the newest version but i dont see an option for 50/50, 70/30 or 80/20. I also dont see an option for more than 1 flavor. Am I missing something? tia

 

[flintlock62]

Are you using this? eJuice Me Up - Best eJuice Calculator Of course, you have to manually adjust PG/VG. The default is 50/50 for the nicotine base, and also the PG/VG mix. You should see 5 flavors with a default of 10%

Not sure if i have the newest version but i dont see an option for 50/50, 70/30 or 80/20. I also dont see an option for more than 1 flavor. Am I missing something? tia

 

[Hoosier]

Not sure if i have the newest version but i dont see an option for 50/50, 70/30 or 80/20. I also dont see an option for more than 1 flavor. Am I missing something? tia

PG or VG Calculator tabs, section 6 lists "First flavor", "Second Flavor", "Third Flavor", "Fourth Flavor", "Fifth Flavor", so I don't see how you're only seeing one flavoring. You put the total flavoring percentage in the last field in section 1 and the ratios of each individual flavoring in section 6.

But, yes the calculator assumes 100% PG nic in the PG Calculator tab and 100% VG nic in the VG Calculator tab, but you can still get whatever final PG/VG ratios by putting the amount of VG or PG % you want in the PG or VG Calculator areas in section 1.

Do folks know that this thread is about the calculator made my Sucbabatdan? Or is it now cool to link and reference other works without answering the question?

 

[xorgo]

PG or VG Calculator tabs, section 6 lists "First flavor", "Second Flavor", "Third Flavor", "Fourth Flavor", "Fifth Flavor", so I don't see how you're only seeing one flavoring. You put the total flavoring percentage in the last field in section 1 and the ratios of each individual flavoring in section 6.

But, yes the calculator assumes 100% PG nic in the PG Calculator tab and 100% VG nic in the VG Calculator tab, but you can still get whatever final PG/VG ratios by putting the amount of VG or PG % you want in the PG or VG Calculator areas in section 1.

Do folks know that this thread is about the calculator made my Sucbabatdan? Or is it now cool to link and reference other works without answering the question?

No I knew who's it was I just had a really old version. This is what i see. I have the newest one now. D'oh

 

[Hoosier]

Never used v5, but sections 1-4 look the same. I think you'll like sections 6 & 7 that are to the right, on the same tab, in the newer version. (I started using it at v9, I think, and always had sections 6 & 7.)



(I was sure you had the calculator that this thread is about. I was wondering about those who keep linking and talking about other calculators in this thread for Dan's calculator. There are plenty of good calculators out there, but it just seems to be bad form to post X on a thread about Z and not answer the question. Maybe that's just me?)

 

[flintlock62]

I see y'all have a Excel spreadsheet calculator. Is the a downloadable link for this?

Never used v5, but sections 1-4 look the same. I think you'll like sections 6 & 7 that are to the right, on the same tab, in the newer version. (I started using it at v9, I think, and always had sections 6 & 7.)

View attachment 195157

 

[Hoosier]

I see y'all have a Excel spreadsheet calculator. Is the a downloadable link for this?

It's in the first post, but it doesn't hurt to post it again.
https://www.filesanywhere.com/fs/v.aspx?v=89716a8960646eb99c6c

 

[tomjw3]

This calculator is, in my opinion the best DIY tool so far. I have been able to streamline my process to the point that the juice just about makes itself, just by tweaking this workbook. Dan, if you are listening,Thank you very much.

 

[xorgo]

Never used v5, but sections 1-4 look the same. I think you'll like sections 6 & 7 that are to the right, on the same tab, in the newer version. (I started using it at v9, I think, and always had sections 6 & 7.)



View attachment 195157

(I was sure you had the calculator that this thread is about. I was wondering about those who keep linking and talking about other calculators in this thread for Dan's calculator. There are plenty of good calculators out there, but it just seems to be bad form to post X on a thread about Z and not answer the question. Maybe that's just me?)

yeah the new version rocks. i dont even know where i grabbed that old version from. thanks scuba. and i understand what you mean about other posts

 

[Koman]

Thank you, nice calculators!

 

[genoxy]

Hi Guys,

I'm getting Unexpected error message when I try to open the link...

any suggestions?

 

[Hoosier]

Maybe PM'ing Scubabatdan? I get the same thing now, but don't know what happened.

 

[Scubabatdan]

This calculator is, in my opinion the best DIY tool so far. I have been able to streamline my process to the point that the juice just about makes itself, just by tweaking this workbook. Dan, if you are listening,Thank you very much.

I am here and your welcome, sorry don't spend a lot of time in here anymore. Have had the modding bug for years now LOL you can always find me in the modders forum or PM me.

Hi Guys,

I'm getting Unexpected error message when I try to open the link...

any suggestions?

Maybe PM'ing Scubabatdan? I get the same thing now, but don't know what happened.

I just tried the link and it worked fine....
They could have been doing maintenance.
You can also find the link to it at the bottom of my sig line.
Dan