Yes, the Kanger EMOW or MOW (both names are seen) has the AFC base, you do not need to purchase it separately.
Eleaf Istick
- Thread starter AnsonJames
- Start date
- th_trl_thread_readers 0
-
- Tags
- eleaf istick istick
- Status
Yes, the Kanger EMOW or MOW (both names are seen) has the AFC base, you do not need to purchase it separately.
If anyone was wondering about the appearances of big atomizers over the supplied 510-eGo adaptor, here you have the dragons!
Check the 19 mm beauty ring! As somebody told us eons (pages) ago, it also serves as thumb-resting place....
And yes, I confess, that was a bit excessive photograph, with a Kamry K1000 drip on top of them...... just to take good measurement of the scale involved.....
(Now I reckon that somebody put a Big fogger over his istick.... I feel relieved.....
)
Check the 19 mm beauty ring! As somebody told us eons (pages) ago, it also serves as thumb-resting place....
And yes, I confess, that was a bit excessive photograph, with a Kamry K1000 drip on top of them...... just to take good measurement of the scale involved.....
(Now I reckon that somebody put a Big fogger over his istick.... I feel relieved.....
)
Last edited:
Yes it is tanked. Since I posted earlier I have went down to 9.5w-10.0w. Was a little to hot. I do like it. You just have to go lower than other devices.
Sent from my iPhone using Tapatalk
Hi guys, feel like I've been in vaping he11 today. One of my iSticks is not regulating, getting bad burnt hits.
That EMOW looks very sweet Zelfie, less than the Aero also.
Yeah, it looks great, and just when I thought I had my tanks picked out. Where do they sell them in SS and black? (not the mega size)
These are pretty and small but no clue how they vape
Aspire ET-S BVC - Glassomizer Black
Anyone used them?
Aspire ET-S BVC - Glassomizer Black
Anyone used them?
I used these exclusively( before bvc) for about 4 months and loved them! Then I got an aspire mini naughtilus with bvc coils and much more air flow and just couldn't enjoy them any longer even with the new bvc coils installed.....the draw just feels too tight to me now. I do miss using them, but have my mother on them now. Upgraded her from e-smart clearomizers and cigalike batteries. They work great, they are cheap, and they are simple to clean, plus they come in cool colors.....I had one of each, even rainbow to match my spinner.
Their awesome!
But use a sharp knife and keep twisting in back and forth in the airholes to make them bigger.
I did this to mine, and it has made it even better.
Anyone wondering about the metal used in the threads; I looked at mine through a loupe and the plating is wearing off the upper-most threads, and the metal underneath looks like brass. The 510 thread is part of the same piece of metal as the top plate, and most plated parts on mods and tanks are either copper or brass, so the brass top plate and threads of the Istick should be no surprise. Brass being rather soft would explain the problem some people have with stripping.
If Eleaf again gives the V2 a single piece top plate and thread, then hopefully it will be made of polished SS which will be much harder and stand up to wear and tear. Otherwise they could use a separate thread of SS inserted into the brass top plate, but if factory QC isn't high enough, an inserted 510 thread may be more prone to shifting with use or be inserted crooked right from the factory. I'd prefer a one-piece top cap and thread made of SS but either way it will cost more, and worth it.
If Eleaf again gives the V2 a single piece top plate and thread, then hopefully it will be made of polished SS which will be much harder and stand up to wear and tear. Otherwise they could use a separate thread of SS inserted into the brass top plate, but if factory QC isn't high enough, an inserted 510 thread may be more prone to shifting with use or be inserted crooked right from the factory. I'd prefer a one-piece top cap and thread made of SS but either way it will cost more, and worth it.
Last edited:
I have one--collecting dust. The draw is impossibly tight, at least for my taste, and I keep getting dry hits all the time--even though I'm very careful with priming the coils. I like regulated air flow.
Mine is old--it came with pretty bad BDC coils.
Last edited:
A couple folks are interested in the Emow tank (or Mow) on the Istick. I have the Emow Mega and it looks good and works great with the stock 1.8 ohm head. It holds a claimed 2.8mils, is 510, and is the same diameter as the Naut Mini; whereas the regular Emow tank hold 1.8mils and is ego thread.
I prefer the Emow airflow adjustment over the Aerotank. The 5 air holes on the Emow IMO are easier to reset if they get knocked out of place.
I prefer the Emow airflow adjustment over the Aerotank. The 5 air holes on the Emow IMO are easier to reset if they get knocked out of place.
Nice. Is it heavier than the regular (glass) Aerotank?
Last edited:
A couple folks are interested in the Emow tank (or Mow) on the Istick. I have the Emow Mega and it looks good and works great with the stock 1.8 ohm head. It holds a claimed 2.8mils, is 510, and is the same diameter as the Naut Mini; whereas the regular Emow tank hold 1.8mils and is ego thread.
I prefer the Emow airflow adjustment over the Aerotank. The 5 air holes on the Emow IMO are easier to reset if they get knocked out of place.
They look awesome, really slick tanks. And I really want to get the 5 hole mini base for other tanks as well.
ETA: I cant seem to find the 1.8ml size, know of any US vendors?
Last edited:
I swear, (or am I hallucinating), your birdy keeps changing ever time I see you.
I have the V2 for my minis and they are a pain to adjust--I had to use pliers...
But both V2 and V3 work.
For my regular Aerotanks, I use both V1 and V2--they are fine. I almost prefer the V1 because it's smaller and doesn't add too much height to the tank. But it's not as accurate as the V2.
Kanger should slow down a bit, IMO. They are making so many different clearos and coils and bases that nobody can keep track anymore.
Last edited:
- Status
